Question 1

Can I use a water cooler in this case?

Accepted Answer

Yes. I water cooled my GPU and CPU without any problem. I made a custom water cooling loop using 360mm and a 240mm radiator. There is Plenty of room to work with in this case. I recommend this case for any type of water cooling.

Question 2

I noticed the window side is on the right of the case. Can you switch the side pannels so the window would be on the left? Thanks :D

Accepted Answer

Yes, you remove a few screws, take out the mother board tray, rotate it, put it back in then you put the window on the other side.

Question 3

In one of the pictures I can see a blue light. Does the case come with a blue light and is it possible to either turn it to red or uninstall easily?

Accepted Answer

The light comes from the from fan located in the bottom front of the case.  You can see it in the main picture.  It is easily removable Likewise, there is a fan in the back which is also blue and can be removed as well.

I strongly recommend this case, but keep in mind it's all plastic on the outside.  It only comes with a couple of fans.  I suggest you review the specks and also purchased additional fans (whatever color you desire) when purchasing the case.

Question 4

Hey guys! Will this case fit a h100i cooler? The one I have doesn't fit well... dont wanna make an modifications :/

Accepted Answer

Yes, according to pc part picker it is compatible.  I have a liquid cooler in my GT1, and this case could hold one twice the size of mine.  Pc part picker will help you find compatible parts for most other parts.

Question 5

What is the true nature of the side window vs motherboard orientation? People answering a previous question seem to be confused about this. In the image here it looks backwards to standard case design (install from the right instead of the left). I see a youtube video where it looks correct. Is this image just backwards?

Accepted Answer

This image is correct. When looking at the case from the front, while standing upright, the window is on the right side.

As a side note, I didn't have any issues installing any of my components in this case. Everything installed correctly without too much of a cord management hassle.

Question 6

Are the drive bays removable? Is the plastic top removable, for better airflow? What is the easy swap hdd and ssd tray? And, this might be what my last question asked but, does it come with at least 1 ssd bracket? Thanks!

Accepted Answer

Q: Are the Driver Bays removable?

A: If by removable, you mean can you pull the trays out? Yes. The trays are how you secure the HDD or SSD in place. (Each tray has holes toe secure pretty much any sized SSD/HDD.) It also appears that you can remove any unused HDD/SSD Tray to install other devices.

Q: Is the plastic top removable?

A: It is, though I don't think you'd want to indefinitely as a style choice. It's there to protect the fans from being easily damaged, but if you, for some reason, really did want it there; Yes, it is removable.

Q: Does it come with at-least one SSD bracket?

A: I assume you are asking about the trays they secure them. As I mentioned, every tray for HDD/SSD will fit almost any size.

Question 7

I currently have the Hurricane case, if I got this Secc Csaz GT 1 would the duel fan lid from Hurricane fit on this PC? I liked the eight fans inside a PC case.

Accepted Answer

the GT1 case has a large case fan on top, case fan on bottom of the from case cover,  large case fan of bottom of the case, right side case cover has 2 case fan,  case rear 1 fan.  you can also mount fan from water cooler system to case top cover.

Question 8

I have this case, Is it possible to get a windowed side panel?

Accepted Answer

If you want a full window panel like the ones on Corsair 900D's, you will have to mod one yourself, because no one offers a modded side window for this case. I own this case and just made a solid window that doesn't have the strange cut outs, or fan holes that the stock side panel has. It can be done with some patience, low tack tape, a pencil, a 2 foot ruler, a dremel drill, a sheet of acrylic from Home Depot, some double sided tape by 3M, and rubber u-channel to line the area you've cut for a professional look from MNPCTECH's website. There are some video's on youtube explaining different perspectives on how to go about doing this. It is not easy to do "well," and is quite an investment for the tools if you don't already have them. I could make one for you if you sent your panel to me :P but you would have to pay me for the work. Best of luck!

Question 9

Are there truly 9 external and 7 internal bays, or are the bays shared?

Accepted Answer

They are shared.  There is an actual ton of them so I cannot imagine someone using all of them unless it is being used as a server.

Question 10

Two questions.  1) I can only figure out where 5 hard drives can be mounted (in the removable trays).  Where are the other 2 drives supposed to go?  and 2) Where can I purchase additional hard drive trays so that I can mount additional hard drives in the external bays?

Accepted Answer

Yes there is missing 2 tray for that space, you cannot mount hard drive there.  I actually mount a big for watercooler in that space.

you can purchase from the company.  their website is really poor. the customer service is really bad.  you have to send email to them. each additional part cost $10. you buy 2 cost $20 does  not matter a screw or bracket.  I broke the plastic henge for video card then install, ask for them for free but no.   missing parts cost $10 or more for each.

Questions & Answers