Antec Solution SLK1600 Beige Steel ATX Mini Tower Computer Case 300Watt(SL300S)Smart Power ATX 12V for AMD & Intel systems Power Supply

Comments: This was my first Antec case, and I'll have to say that the case is definately worth the money. Construction is very solid, and although somewhat cramped with a full ATX board, everything fit without a problem. The included powersupply was also one of the deciding factors in my getting this case, since I'd been having problems with the generic PSU I'd been using. Five out of five for an excellent case, even though the side-panel removal is kinda funny.

Comments: First off lets just say that ANTEC makes good cases. I got this from a friend of mine who got it on NEWEGG because I turned him onto NEWEGG and he's never looked back. Yes it is on the small side but will fit more than you'd think. This is now the Family computer and I needed it to fit on a narrow desk, mission acomplished. I have in this case: SOYO p4 fire dragon full atx COOLER MASTER CPU fan ( speed adjustable ) LG CD-R/RW/DVD combo drive 52X CD-ROM 60 GB maxtor 3.5 floppy 3.5 100MB zip 2 X 80MM smart antec fans ( Replaced these from the loud originals) It will fit better with round cables and creative tie wraps. Overall a stable, well built, smaller footprint case that works well in tight spaces. Just don't try <font>d</font>ropping the latest configuration from CRAY computer into it, in other words think somewhat smaller.

Comments: I bought one of these for a system I built for my wife. These are perfect for everyday/web surfing type of systems where you don't need a huge full size case. Its a bit thinner here and there than other more expensive Antec cases I bought but its still a quality case,and it comes with their well known power supply. Look at the back of the case,you can stick a 120mm fan on it and really move the air. You'll like it and the price.

Comments: I am a system builder, and I specialize in systems and networks for small offices. I sell reliability and quality above all, and this Antec SLK1600 has been a mainstay in my catalog for 2 years. It's a &quot;no-frills&quot; case with lots of value. Two thumb screws hold the top cap on. Once those screws are removed, the sides (yeah, BOTH SIDES) easily lift away. There is plenty of room inside the case for a full ATX mobo (I use the Intel D865GBFL), and even more room once the HDD/FDD carriage is removed. The 5.25 drives slide in easily, and do need to be screwed in fom both sides, but thats OK since both side panels are easily removed without a screwdriver. The power supply is typical, high-quality Antec. The case is quiet, cool, and I've NEVER had a PSU failure or defect in 2 years. I have built over 200 systems with this case, and it is the best option for under $xx.

Comments: I just used this case with an AsRock SIS 755 motherboard, 3400+ 754 pin CPU, 120G Seagate HDD, Santa Cruise sound, X800 ATI card, Allied 500W PSU. It matched the customers beige monitor perfectly and is a rather smallish case. You can fit a nice 92 MM fan in the back too. Very simple and functional, and fairly quiet if you use quiet fans (Vantec Stealth). Also I really like the seperated powerw supply wire bridge that totally hides your molex wires on the upper part of the case. It makes the perfect 'speeper' case for a cheaper - but very fast system (which the SIS 755 is). The Antec badge looks nice on the case too. Overall if you have a beige monitor you don't want a funky mismatched color scheme - your system will look much better with this case.

Comments: For the price this case is great, alittle flimsy untill you tighten down all the drives (they add alot of stability). But all in all a great design, quiet when closed up and tooless to open the case. Check to see if all the screws on it are tight, some of mine where loose.

Comments: This is a very good case for the money. Will buy agiain, wish it came in black, but overall no problems. Newegg was great!!

Comments: Good case, great PSU. Used it to cobble together a cheap but decent PC for my mom who's dinosaur was hitting the wall. It is a little small inside (careful placing the mobo in) and it does lack a few nice features that other Antec cases have but it works very well for the $$. Top does need to come off to remove sides but it's no hassle at all (very, very easy). I like the space for either an 80mm OR a 92mm fan in the back.