Question 1

Hi, I have 3 monitors of Dell p2717h with a width of 24.4" each. wanted to know if this Stand is good enough to hold them in width?

Accepted Answer

I have 3x 24s and this does very well with them.  It's designed to hold up to 30 inch per monitor.  You should be ok with this holding your Dell's.

Question 2

how far apart are the feet (from the center)? I have a small platform this might fit on but I want to be sure. Thanks!

Accepted Answer

Rougly 26 inches apart at the stands. So a 32 inch table should work if you don't mind having your monitors stick out over the sides like mickey mouse ears. Although the feet would have to be angled so that way they are parallel to each other... but I can't speak to its stability that way.

Total width for the stands with feet positioned correctly is a bit over 38 inches.

If your table is smaller than that... I recommend getting a bigger one. I have a 5ft or 72in table with 3x 27in monitors mounted. The monitors span a total of 68in. Good luck.

Question 3

What is the depth of the product?

Accepted Answer

Center (straight) section is approx. 5" deep. Overall depth it dependent on how angle (adjustable) you put on side monitors. Mine is approx. 10" and I'm guessing a 10 deg. angle. Hope this helps.

Question 4

I have 3 32" monitors. First will it fit 3  - 32's. And Second how much angle can have on the outside monitors?

Accepted Answer

Depends on your version of 'fit.' I currently run a trio of 31.5" curved Samsung monitors and the edges of the central screen overlap the outside frames, but do not block the screens themselves.

To answer your second question, assuming you want to implement said 32" monitors, you won't have a lot of wiggle room. Maybe 15 degrees at best.

Question 5

will i be able to turn the side monitors to fit into a corner desk?

Accepted Answer

Yes, the weight can be an issue if you don't keep the legs forward. I have my right most monitor in portrait so I can read full technical documents and it is athe a right angle to fit the corner. Its not exactly 45° but close enough. However once you have it in place and both very legs are forward it will maintain its balance with no issues....how many times would u need to move a monitor once its set, not many.

Question 6

This monitor can handle up to 3EA 32 monitors.  If I put a 34 curved display in the middle and 2EA 27" would the stand be able to support them?

Accepted Answer

This stand is well made and substantial. It will have no problem supporting your monitors. Interesting to see how adjacent edges, flat & curve screens line up. There is a fair amount of horizontal angle adjustment.

Question 7

can used for 32 inch tv or not?

Accepted Answer

Yes, but when u buy something like this it's best  to ensure all three monitors are the same type and model  otherwise it's a gamble on fit because although you can have all be 32" monitor not all brands have the same frame.

Question 8

Well this mount an iMac 27" Retina display along with a curved 32" AG352UCG ?

Accepted Answer

it should fit I have a 34 inch ultrawide screen and 2 24 inch monitors on mine

Question 9

Can this monitor fit a 29 Inch on the left, a 27 Inch in the middle, and a 29 Inch on the right?

Accepted Answer

yes - brackets are horizontally adjustable. Worst that will happen if monitor is small is that you won't be able to adjust so they are edge to edge

Question 10

I have three 32 inch curved monitors.  Will this work with those monitors?

Accepted Answer

Yes it says it will I just bought one for 3 28inch 4k Monitors so I think they should too.

Brand	Amer Mounts
Model	AMR3S32
Type	Multi-Monitor Stand

Color	Black
Specifications	Support Monitors up to 22lbs (10Kg) on each bracket

Dimensions (H x W x D)	1696504135mm (66.77''x19.84''x5.31")
Weight	6.2 Kg (13.64 lbs)

Meet Your Seller

Sponsored Products

Triple Monitor Mount Stand for up to 32 inch Monitors. Also ideal for 26, 27, 28, 29, 30 and 32 inch monitors.

Learn more about the Amer Mounts AMR3S32

Customer Reviews of the Amer Mounts AMR3S32

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: 9SIA6ZPK9Y0322