Cooler Master Elite RC-334-KKN1-GP Black SECC ATX Mid Tower Computer Case

Pros: Lots of good things: Lightweight, color is beautiful and simple (I love the silver on black). Comes without a power supply so you can make the choice yourself. Good toolless system with a large amount of internal bays (6 3.5"). The toolless system is very user-friendly unlike some. Front of case is all mesh but does not dent without effort. Both ATX and mATX boards have fit great in it so far. Adding in another fan makes for great airflow and there is a spot for another 120mm on the front of the case. Power button placement could be better, but after a short amount of time, I have begun to like it.

Cons: There are more slight inconveniences than cons: The hasp that secures the expansion cards to the case is somewhat weak. I fixed this not by removing it but by bending the catch downward a slight bit. This allowed it to get a better hold. The sheet metal is a little flimsy. I've learned to be careful with my cases after handling weak OEMs. Just treat this case gently and it will last. Power button is in a non-standard location and is a part of the front-right molding. Need to remove the opposite side panel to install drives without a hassle.

Overall Review: The case is a do-all case. Don't use it as a bookshelf or footrest and it will stay in good condition. I bought it intending to use it for a mid-level gaming system but since my new mobo is dead, I decided to use it for my home server. I dropped in an ATX P4 board and started using it for that. I'll be back to buy another and will probably get this one again. This case is slick looking if you like minimal bells and whistles.

Pros: Inexpensive for what you get. Drives can easily be inserted and removed because of the screw-less design. Includes HD-Audio and AC'97 plugs on same wire for the external audio ports. Everything works. Start-up/reset buttons didn't bother me. Space for a fan on the front of the case right in front of the hard drives. All external drive bays have filters in them to prevent dust. Very, very nice looking case (imo) and everything works.

Cons: The expansion slots on the back are one-time removable, because you have to break/cut them off. A few sharp edges. Cut my hands a little. Had some fine metal shavings in my hand after build, but not bad at all. Expansion slots includes a snap-in thing on top for easy removal/insertion, however it's not very tight so I also had to use a screw to hold the video card in place. Not exactly made out of 3" thick steel, but it more than serves its purpose. Not a whole lot of instructions are included.

Overall Review: This was one of the best parts I bought with this build. It is a very nice case for the price. I also have a Lian-Li v2100 full tower case. Nothing really compares to it, but this case is a very good inexpensive alternative for anyone looking to build a system in a smaller mid-tower case. Make sure to snap off the front portion of the case in order to install external drive-bay devices, because the covers have locks on them you have to unlock in order to remove them. 5 eggs because it's so inexpensive, but if money is not a issue, you could probably get a Lian-Li or other premium case and not have to worry about any sharp edges or any of the other cons I listed above. I'd recommend this case over any others I've used, though, for a mid-tower solution. Built on a P5Q Pro motherboard.

Pros: If you want a pc that you assemble once and let it run, this works fine. If you can't leave it alone or use it as a shelf, get something sturdier. Very nice looking in person.

Cons: When you break off a pci blockoff plate on the back of the case, you can't put it back, it is a one shot deal. Pay attn.

Overall Review: I added a front 120mm fan, very easy. I ditched the pci fold over hasp on the case and used screws for my cards, just sturdier IMO.

Pros: Simple design. Good air flow. I am not a fan of fancy cases. This is the simplicity at its best.

Cons: No 1394 although that is the hole for it on the font panel. I don't use 1394, so it doen't matter to me. My holes of old dvd burner doesn't fit on screw-less bay

Pros: It is a really good case great air flow. My CPU Temp droped 16 degrees. Easy to set up the metal is a little thin easy to bend but the cases skeleton gives it good support you wont have any probles if it is under a desk not out in the open

Cons: None

Overall Review: If you really want to make it look cool buy an 120mm Colored LED fan for the front and a 80mm fan for the side but you will have to take the cpu vent off.

Pros: No Tools needed, looks cool, light, very cheap

Cons: Seems a little flimsy, but for the price it is great

Pros: Light Weight Nice overall black color lots of vents with filter in the front Nice tool less drive mount.

Cons: The cover edge is slightly bent in the back when the cover screw is tightened. No 1394 port up front.

Overall Review: It's pretty good case overall, even color, light weight and quite sturdy.

Pros: Nice looking. Easiest installation of cards and drives I have ever had due to the "Twist and lock" mechanisms (NO SCREWS). Standoff placement for my ASUS M3A78-EM motherboard was dead on (unlike some other cases I have used). Nice front panel layout with Blue LED's and a black grill. Overall this is recommended as a good buy.

Cons: While the side flow tunnel air intake for the CUP fan is a nice addition it doesn't totally line up with the CPU placement on the Asus M3A78-EM motherboard but it seems to be more than adequate.

Overall Review: If you don't mind a case that doesn't have a showy side window then you will like this one. A 120mm Fan with blue LED's would be a nice addition for the front fan mount that would allow you to see the blue glow from behind the front grill.