Cooler Master Stacker RC-832-KKN1-GP Black Aluminum ATX Full Tower Computer Case

Pros: The case is truly stunning. In the pictures it might not look like that, but the matte aluminum, the finish, no other word but very elegant. I got this case to house 2x Superclocked eVGA 8800GTS card in SLI, eVGA 680i mobo, 4Gb of Corsair Dominator 8500C5D ram w/ fans, Intel QX6700 overclocked to 3.2ghz, 2x Raptors 150gb in Raid 0 and Seagate 500gb 7200.10 with SB X-Fi and BFG 1000W psu. The install went FLAWLESSLY. Everything about this case is in the right spot. I used the screwdriver like only 3 times on couple of screws (psu, mobo support screws and hard drive 4-3 bay), but overall everything is tool-less. I also installed additional 5 120mm fans, 4 in the side panel and one on top as exhaust. AeroCool Turbine fans to be exact. They very silent and I actually hear more of the chipset cooling fan and dominator fans then these. Oh, and slide-out mobo IS HOT!!! It's so well done, you'll be thinking how did I ever build before this?

Cons: The power button turns on in a weird way. When you turn your PSU on from behind, you see the power button glowing, after that, it won't glow no matter if the computer is on or off. Weird. Aluminum finish leaves some fingerprints. Nothing really too visible, but it happens. Ok, maybe not really a flaw.

Overall Review: I would have to say, without a doubt, the best engineered case I've seen in my life, and I built 100s of computers in the past 15 years. As always, NewEgg is absolutely flawless, from parts pricing to shipping everything was incredible and with very low shipping price. I was really pleasantly surprised. Keep up the good work guys! I know it might be against rules, but it might help some people to decide about the size of the case and the build process. My whole computer building process including ALL parts from NewEgg with CM Stacker 832 case. http://www.flickr.com/photos/26449626@N00/sets/72157594517829410/

Pros: Good air circulation, easy tool-less setups, expandability, superb quality, all aluminum, and more. Installed 7 120mm fans and 1 300mm fans for the cm stacker side panel. Idles less than 30C!!! WOOT A+

Cons: None soo far

Pros: This case, theres alot to be said about it. firstly, the cooling on this case is superior to any other case that is out and will be out in the next months. ive compared this to the upcoming TT Armor+ and while that case looks a bit better and has more expansion slots, the cooling on this 830/832 line is superior. the side panel fan cage is not limited to 120mm x 25mm fans, only the tooless system is. there are screw mounts on the cage where one can install 140, 120, 92, and even 80mm fans of ANY thickness as long as the fans have normal screw holes! the aluminum on the case door is a good 1/8th of an inch thick, can probably use it as a face shield in flying debris its so thick. the orientation of this case can also be changed as well, the case door can be changed to open to the right or to the left (it naturally comes opening to the right) the motherboard tray can also be inverted and installed on the left side instead of the right so one can have it set up upside down

Cons: well, the case accomplishes its goals perfectly, it is THE best cooled case you can get your hands on PERIOD and if its still not good enough, its very modder friendly, you can probably buy 15mm thick 80mm fans and install them on the bottom of the motherboard tray to cool the backside of the motherboard, sure the fans would make it difficult to slide the tray back out, but you can always cut at the case to remove some metal to let the fans go... the aluminum on the case thats not in the front door is rather thin and flimsy, the top would bend if you apply little force. i used to let my guests and myself sit on my PC (TT Armor) case and my subwoofer (z5300e) as chairs if needed, supported people up to 180lbs. both were VERY sturdy items, this isn't. the finish of this case leaves SO MUCH to be wanted. while it looks good, i would've preferred a glossy finish. it feels like rough unfinished wood without the splinters, it would rip skin cells off your hands if you rub it the wrong

Overall Review: ill continue my pros and cons here. PROS: the bottom of this case has two extra 120mm fan ports that are not limited by height (but may interfere with add-in cards)and the top of this case has another 120mm fan port, HOWEVER this is a tooless port and will only take a 120x25mm fan. CONS: the wheels don't grip the ground well and slide rather than roll on the ground, not good for my hardwood floor. the HDD cage is VERY difficult to work with once loaded with 4 HDDS, the thing is heavy and difficult to screw into the case (tooless mechanism doesnt work for the HDD cage)as there is no guide to keep the cage from going below the screw line. i wedged a ball of paper in there to help out lastly the rough finish makes it VERY easy for the thing to scratch the paint off itself. all things aside, this case is AWESOME, just be sure to have alot of cloth towels to lay it on so to doesn't scratch the floor or itself. the pros outweigh the cons, this case is worth the tiny bit o

Pros: First of all, the build quality is excellent. Nicely crafted aluminium frame, no sharp edges, feels very strong even though it's not so heavy. Wheels are a nice addition that I chose to use and turn out to be very convenient. Sliding tray is of nice quality and built but has its downside whether used or not! Love the top front controls and 4 x USB ports. Lots of space inside as one would expect even if it's not higher than my previous mid-tower I own.

Cons: This case is not perfect... First of, it was missing a rubber foot, so I decided to install the supplied wheels. Well, it was also missing a screw to attach these wheels... Luckily those are the only things that were missing. Next, the side panels are very flimsy expecially in comparison to the strong frame, this is somewhat surprising (to the point that I'm affraid to damage them any time I work inside the tower or just touch it with my knee) Which bring me to the next point, those side pannels don't seal firmely arount the edges thus vibrate and wobble easily. Last but not least, don't expect this case to help with internal noise in any way! It's great of aeration, but does nothing to dim the fans noises. Last: no cable management what so ever, and no easy place to attach them either...

Overall Review: Overall, not so bad, but as much as I was impressed with the frame structure, I was disapointed by the side panels, the missing pieces and the lack of noise dampening. Despite all that, still a good case. Note to vendor: Add a couple of spare screws...

Pros: Very well made, edges have been de-burred and rounded to save you from bleeding all over your motherboard :). I pulled it down to it's componenst and found quality throughout... would buy again in an instant!

Cons: The 830 stacker comes with more accessories for less $$, I dont need the BTX conversion or the Raptor drive bay for the top of the case... so this was not an issue for me... I like the door on this one better, just looks cleaner IMO.

Overall Review: HUGE... no, its.... H.U.G.E!! I thought my other case was large, this thing is taller than my monitor and as deep as my desktop. No complaints tho- it has plenty of room for my 8800GTX and all the cooling I could ask for...CPU E6700 running just above room temp with the four side 120mm 100 cfm fans doing their job ;)

Pros: AWESOME airflow. Solid construction. Lightweight (came from my old 1999 gigabyte full size tower). Holds tons of quiet 120mm fans. Can use CM's Cross Flow Fan. Nvidia used this same case to show off their 3 way SLI in CES 07 (check tomshardware). Rubber mounted drive cage - I could not hear the three seagate drives mounted in there while I could on my old case. QUIET. Comes with filters but I went out and bought more of those foam A/C filters for another layer like I did with old case.

Cons: ....none.... that I could think of. Well, except it came with only two 120mm fans.

Overall Review: For those with rattling side panels - it came with side panels very loosely, like 1 cm in slackness - so yea it'll rattle around and I didn't like that. I was able to fix it easily by bending the tabs down on the side panels gently - sides fit TIGHTLY on case now.

Pros: It looks cool, and it's got tons of air flow and room inside. This case really had potential and then Cooler Master dropped the ball.

Cons: Every single con everyone has listed I have to agree with about this case, and pray you get one that doesn't have a defect. Mine came with a broken USB port on the front. The package it shipped in had no damage so this had to be damage from the manufacturer. I called cooler master the day after I received it and though they seemed like they wanted to help and said they would send out the front i/o circuit board. I still haven't received it. Instead I got 3 different shipments of wrong parts, 2 of which I had to pay shipping charges because CM underpaid the postage on it. Since August till now January they have not fulfilled my request for the front i/o pcb. For that kind of poor customer service I wouldn't recommend anyone buying anything that Cooler Master makes.

Overall Review: Newegg is great I got this piece of ? in one day. If only CM support was so good. For the money you pay for their cases don't expect CM to care about you. I just got done writing a complaint to the Better Business Bureau about them as well and I suggest anyone that's had issues with them do the same. When I bought this case it was $xxx with a $xx rebate. so for $xxx I expect a case with all the parts working and good customer service. I still gave it a 2 stars cause it does look nice, but looks aren't everything.

Pros: Shipment came on time. Product/case was in great shape (given that the ordser was part of the pre-Christmas shopping madness). It has a lot of room inside, and it is very easy to add/change just about every aspect of the case - Mobo placement, slot placement, fans, PSU orientation, extra enclosures etc. Black case attracts dust, and paist goes off if you brush too firmly

Cons: Having read other reviews about the case flimsiness, and having played around with my case for a while, I have to agree on that issue. On the flip side, it is light for its size (Aluminium)

Overall Review: This is a full-size ATX case, so pay special attention to the length of wires - PSU cables, connectors etc. I also ordered a few extra 2-packs of the CoolerMaster 120x120x25 LED fans to add to the airflow. This particular model has a cover/door for the entire front panel, so investing in nice looking add-ons which fit in the 3.5" or 5.25" slots may be overkill. Also, will need to keep the door open during operation if you decide to install extra fans or 4-in-3 units in front