Question 1

Does not give dimensions does this fit in a regular hdd caddy?

Accepted Answer

Yes it does.. I replaced my 3.5 hd with 2 2.5 ssd which i mounted in bracket.. Then the bracket slid right into the spot where i pulled out the 3.5. I had no trouble installing the mounting screws either.

Question 2

Do I need this bracket for mounting in a Toshiba Quosmio laptop?

Accepted Answer

I wouldn't think so. This bracket is used to mount laptop sized hard disks (2.5 Inch) into desktop computers (3.5 inch drive bays).

Question 3

Will this SSD Mounting Kit work for a Dell Inspiron 3847 Desktop? Thanks in advance!

Accepted Answer

The kit comes with mounting units that attach to pre drilled holes in chassis of case, if by chance you have shortage you can re adjust your holes to match said setup, hope that helps.

Question 4

do u have a picture showing 2 ssd's loaded in the bracket?

Accepted Answer

I wouldn't recommend doing that. They generate heat and you could damage one or both if they are mounted close together. Sounds like you are running out of space for extra drives. I bought a larger case last year and have plenty of room, with three SSDs and a hard drive and haven't even come close to filling up the hard drive space available.

Question 5

Can a 2.5 SSD be mounted to the extreme right side of the mounting kit?

Accepted Answer

It's made of plastic, if you are brave enough, anything can fit! You may need to drill the appropriate holes for the bottom SSD screw mounts. Just make sure you mark your holes and don't have the SSD in place while drilling. Good luck!

Question 6

does this work with 2007 imac?

Accepted Answer

Yes, but you will lose the iMac's ability to check the temp of the drive.

Question 7

This may be a dumb question and I apologize in advance but is this compatible with a Caselabs TH10 case?

Accepted Answer

Essentially this allows you to put a 2.5" SSD into the adapter and then it functions as a 3.5" drive for insert into a computer case, which I thought would be universal.

Question 8

Does this come with appropriate screws for the drive bay?

Accepted Answer

Yes, all the screws to attach the drive to this and then this to the PC are included.

Question 9

Is the bracket made of plastic or steel ?

Accepted Answer

The bracket is made of plastic, so far works it fine for me.

Question 10

Is the bracket made out of plastic or steel ???

Accepted Answer

Plastic. The threads will eventually strip out on at least one screw hole with repeated use. If you don't care about that, plastic is cheaper. Metal is harder to strip threads on thus tends to last longer.

Brand	BYTECC
Model	Bracket-35225
Color	Black

Conversion Tray	1 x 3.5" Drive to 2 x 2.5" Bay
Mobile Rack Drives Support	1 x 3.5" Drive to 2 x 2.5" Bay
Mobile Rack Interface	SATA I/II/III
Protection Case	Single Drive
Specifications	This Internal Mounting kit convert 3.5" drive bay to 2 x 2.5" drive bays for 2.5" Hard Drives. It works with HDD / SSD and includes screws to mount the drive.

BYTECC Bracket-35225 2.5" HDD/SSD Mounting Kit For 3.5" Drive Bay or Enclosure

Learn more about the BYTECC INC Bracket-35225

Customer Reviews of the BYTECC INC Bracket-35225

Warranty & Returns

Warranty, Returns, And Additional Information

Return Policies

Manufacturer Contact Info

Item#: N82E16817994085