

DC Multifunction Battery Monitor Meter
The PZEM-015 DC multifunction battery monitor meter is mainly used to test all kinds of battery’s voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, SOC, energy,running time, and display the measurement data through LCD screen.
Specification
- Power consumption
- Normal working state: 0.03-1.2 W
- Sleeping state: 0.5mW-0.5W
- The power consumption is related to the test voltage valve,the higher the voltage,the greater the power consumption.
- Working temperature-20’C ~ +60’C.

Display interface is large-screen LCD, it can display nine parameters at the same time
- Voltage: Measuring range: 0-200V;Minimum Resolution: 0.01V (when the test voltage is <8V, please use the independent power supply mode)
- Current: Measuring range: 0-500A. The starting test current: 20mA
- Power: Measuring range: 0-20000W, Starting measure power: 0.2W
- Impedance: Measuring range: 0-1000O
- SOC Percentage Display:Displays the percentage of power remaining
- Capacity: Measuring range: 0-1000AH.
- SOC: Dump energy is display via the battery symbol, totally 10 grids, every grid present 10% energy.
- Energy:Measuring range: 0~9999kWh.Over the test range will become zero.Note:1Wh=0.001kWh=0.001 Kilowatt
- Running time:Measuring range: 0 ~ 999 hour (without load the time will not accumulate)

No Screws Design
- Push-on terminal,no need screws to connect

LCD Dispaly
- Large-screen
- LCD with a full sight 180°-view
- The blue backlight can be turened on/off manually

Widly Application
- DC Multifunction Battery Monitor Meter widly used for solar penel,wind generator,industrial assebly line,automobile/RV,etc.




DC Multifunction Battery Monitor Meter
The PZEM-015 DC multifunction battery monitor meter is mainly used to test all kinds of battery’s voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, SOC, energy,running time, and display the measurement data through LCD screen.
Specification
- Power consumption
- Normal working state: 0.03-1.2 W
- Sleeping state: 0.5mW-0.5W
- The power consumption is related to the test voltage valve,the higher the voltage,the greater the power consumption.
- Working temperature-20’C ~ +60’C.

Display interface is large-screen LCD, it can display nine parameters at the same time
- Voltage: Measuring range: 0-200V;Minimum Resolution: 0.01V (when the test voltage is <8V, please use the independent power supply mode)
- Current: Measuring range: 0-500A. The starting test current: 20mA
- Power: Measuring range: 0-20000W, Starting measure power: 0.2W
- Impedance: Measuring range: 0-1000O
- SOC Percentage Display:Displays the percentage of power remaining
- Capacity: Measuring range: 0-1000AH.
- SOC: Dump energy is display via the battery symbol, totally 10 grids, every grid present 10% energy.
- Energy:Measuring range: 0~9999kWh.Over the test range will become zero.Note:1Wh=0.001kWh=0.001 Kilowatt
- Running time:Measuring range: 0 ~ 999 hour (without load the time will not accumulate)

No Screws Design
- Push-on terminal,no need screws to connect

LCD Dispaly
- Large-screen
- LCD with a full sight 180°-view
- The blue backlight can be turened on/off manually

Widly Application
- DC Multifunction Battery Monitor Meter widly used for solar penel,wind generator,industrial assebly line,automobile/RV,etc.




























































