| # of Users | 400 |
|---|
| Standards | IEEE standards: IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d IEEE 802.11ac |
|---|
| Device Management | Deploy and configure multiple Cisco Business access points and mesh extenders easily without a physical controller, using Cisco Business Mobile app. Optional multisite remote management is available through the Cisco FindIT Network Management. |
|---|
| Wireless Data Rates | 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps 802.11n data rates on 2.4 GHz: 6.5 to 300 Mbps (MCS0-MCS15, HT 20/40) 802.11ac data rates on 5 GHz: 6.5 to 867 Mbps (MCS0-MCS9) |
|---|
| Security | Authentication and security: Wi-Fi Protected Access 2 and 3 (WPA2 and WPA3) 802.1X, RADIUS Authentication, Authorization, and Accounting (AAA) 802.11r and 802.11i
Physical security: Torx security screw, included with the access point Kensington lock slot to lock device to mounting bracket |
|---|
| Antenna | 2.4 GHz, gain 2 dBi 5 GHz, gain 3 dBi |
|---|
| Mounting Location | Indoor |
|---|
| Interface | 1x Gigabit Ethernet uplink (10/100/1000BASE-T autosensing), PoE 3x Gigabit Ethernet local ports (10/100/1000BASE-T), including one PoE out port: PoE out provides 802.3af (Class 0) when access point is powered by 802.3at, or no output when powered by 802.3af One passive pass-through port, RJ-45 (back to bottom) |
|---|
| LEDs | Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
|---|
| MIMO | Multi-User (MU) Multiple-Input Multiple-Output (MU-MIMO) technology allows transmission of data to multiple 802.11ac Wave 2–capable clients simultaneously to improve the client experience. Prior to MU-MIMO, 802.11n and 802.11ac Wave 1 access points could transmit data to only one client at a time. This was typically referred to as Single-User MIMO (SU-MIMO). |
|---|
| Power Supply | Powering options: 802.3af/at Ethernet switch; a Cisco Business switch with PoE is recommended Optional Cisco Business PoE injector (CB-PWRINJ-xx)
Power draw: 8.5W (maximum, without PoE out) |
|---|