CISCO WS-C2960G-48TC-L 10/100/1000Mbps Switch 44 Ethernet 10/100/1000 ports and 4 dual-purpose uplinks (each dual-purpose uplink port has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active) 8000 MAC Address T
Any questions? Our AI beta will help you find out quickly.
Try me now
Cisco Catalyst Switch 2960G Switch Includes 44 X 10/100 Fast Ethernet Ports - 4 X Dual Purpose Ports - Lan Base Image The Ws-C2960G-48Tc-L Is Truly Capable Especially Considering That It Only Takes Up A Single Rack Mount Units Worth Of Space. Its Des
Learn more about the Cisco Systems, Inc. WS-C2960G-48TC-L
44 Ethernet 10/100/1000 ports and 4 dual-purpose uplinks (each dual-purpose uplink port has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
Per-port status: Link integrity, disabled, activity, speed, full-duplex System status: System, RPS, link status, link duplex, link speed
Power
100-240V AC (autoranging) , 3.0-1.5A, 50-60 Hz
Features
Features
Ease of Use and Deployment Superior Redundancy for Fault Backup Integrated CISCO IOS Software Features for Bandwidth Optimization Advanced QoS Granular Rate Limiting Port-based ACLs for Layer 2 interfaces allow application of security policies on individual switch ports. Unicast MAC filtering prevents the forwarding of any type of packet with a matching MAC address. Unknown unicast and multicast port blocking allows tight control by filtering packets that the switch has not already learned how to forward. SSHv2 and SNMPv3 provide network security by encrypting administrator traffic during Telnet and SNMP sessions. SSHv2 and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions. Bidirectional data support on the Switched Port Analyzer (SPAN) port allows the CISCO Secure intrusion detection system (IDS) to take action when an intruder is detected. TACACS+ and RADIUS authentication enable centralized control of the switch and restrict unauthorized users from altering the configuration. MAC address notification allows administrators to be notified of users added to or removed from the network. DHCP snooping allows administrators to ensure consistent mapping of IP to MAC addresses. This can be used to prevent attacks that attempt to poison the DHCP binding database, and to rate-limit the amount of DHCP traffic that enters a switch port. DHCP Interface Tracker (Option 82) feature augments a host IP address request with the switch port ID. Port security secures the access to an access or trunk port based on MAC address. After a specific timeframe, the aging feature removes the MAC address from the switch to allow another device to connect to the same port.
Dimensions & Weight
Dimensions
17.5" x 12.9" x 1.7"
Weight
12.0 lbs.
Environmental
Temperature
32 to 113°F (0 to 45°C)
Humidity
10 to 85% (noncondensing)
Disclaimer
Disclaimer
For most updated manufacturer warranty, please go to www.cisco.com.
Registration Phone
1-800-Go-Cisco
Additional Information
First Listed on Newegg
March 12, 2007
Customer Reviews of the Cisco Systems, Inc. WS-C2960G-48TC-L