CMS 12GB (3X4GB) DDR3 10600 1333MHZ ECC REGISTERED DIMM Memory Ram Upgrade Compatible with HP/Compaq® Proliant Dl160 G6 Ecc Reg For Server Only - C20

3PCS OF 4GB 1333MHz ECC REGISTER ALL OF OUR KITS ARE IDENTICAL IN SPEED AND BRAND Genuine CMS brand, CMS is one of the most trusted names in the Computer Memory industry and this product carries a Lifetime Warranty from CMS.
Compatible with: HP/Compaq ProLiant DL160 G6 Maximum Memory: 48GB Using Qty-12 4GB ECC UDIMM 192GB Using Qty-12 16GB Quad-Rank RDIMM 288GB Using Qty-18 16GB Dual-Rank RDIMM 384GB with release of 32GB
Quad-Rank RDIMM Expansions: 18 Sockets maximum using RDIMMs 12 Sockets maximum using UDIMMs or QR RDIMMs WE offers "K3" kit part numbers for Triple Channel mode. OUR DDR3-1333 modules automatically clock down to 1066MHz and 800MHz depending on which Intel Xeon model and the number of modules installed. Due to chipset limitations, OUR DDR3 Quad Rank memory will operate at 1066MHz in the first Triple Channel bank. Adding Quad Rank modules in the second Triple Channel bank will operate at 800MHz. The third memory bank must be unpopulated. Due to chipset limitations, Unbuffered ECC DIMMs are limited to TWO Triple Channel banks per processor on Intel Xeon 55xx series systems. This system supports either Registered ECC or Unbuffered ECC memory. Mixing Registered ECC and Unbuffered ECC modules is not supported within this system. Low Voltage DIMMs can run at 1.35V with Intel Xeon 5600 series processors, but will also run at 1.5V using Xeon 5500 series processors. 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM. The two parts may be installed in the same system but not within the same memory bank. Use like modules for dual and triple channel operation. For optimum dual or triple channel configurations, use like modules within the same memory bank. Do not mix single, dual or quad rank modules, varying capacities or speeds.