CONAIR Warm Steam and Cool Mist Facial Sauna
The exclusive two-step True Glow™ Warm Steam and Cool Mist Facial Sauna uses warm steam to enhance overall skin tone and elasticity and open pores to prepare your face for a deep cleanse. After cleansing, the cool mist closes pores. Include the facial sauna in your beauty regimen to hydrate your skin and diminish the appearance of aging and damage from sun and dry environmental conditions.
- Timer has five settings so you can choose the length of your facial
- Exclusive two-step system
- Warm steam opens pores and cleanses
- Cool mist closes pores and hydrates
- Defend against dryness, signs of aging and environmental damage
- Timer has five settings so you can choose the length of your facial
- Auto-shutoff
- Detachable Facial Cone
- Temperature Settings
- Five–Setting Timer
Experience the Warm Steam Treatment
- Cleanse your face
- Start with your face 3-4 inches away from the cone and test the distance for your own comfort. Don't rest your face on the cone.
- If you have sensitive skin, do not expose your skin to steam for long periods of time. Check your face often to be sure it's not irritated
- Turn switch to HOT
- After three minutes, set timer for 3, 6, 9, 12, or 15 minutes and begin to steam your face
- When the set time expires, the sauna shuts off automatically
- Cleanse away loosened dirt, oil, and cosmetics
- For more information, please download the Instruction Booklet
Follow with the Cool Mist Treatment
- After warm facial steaming, turn switch to COOL
- After two seconds, set timer for 3, 6, 9, 12, or 15 minutes
- Facial sauna will shut off automatically when time is up or when water level is lower than water sensor
- Pat face dry with cloth
- Apply your favorite moisturizer
How To Set Up Your True Glow Warm Steam and Cool Mist Facial Sauna
1. Lift facial cone from base and then lift hinged front of upper housing
2. Remove warm steam chamber cap and lift lid of cool mist chamber.
3. Fill warm steam chamber with two cups of water or until the water reaches the Max. fill line in the cool mist chamber
4. Close cool mist lid, warm steam cap, and front of housing
5. Place facial cone over the base
6. Plug unit into a 120 Volt AC outlet