Question 1

Does this fan have LEDs?

Accepted Answer

No It does not. It is not a illuminated fan. Hope this helps

Question 2

Will it fit on the side panel of my Phantom 630 and is it more quiet than the stock fan that comes with it?

Accepted Answer

Provided you have the standard 630 and not the full-windowed one, it will fit.  As for noise level, I can't speak to that since I don't know how loud the stock fan is.  That being said, I don't even hear it turning in my HAF XM.

Question 3

I was wondering what cables I need inorder to connect this to my new pc build? it says 3/4pin yet im not sure on which to purchase. I also want to get another cable to allow more fans to be connected to my psu pci-e 730w. Let me know! Thanks =D

Accepted Answer

I have one and it is quite and move a good amout of air keeping my PC cool under loads. But to answer your question no cable is needed it will work with a 3 pin or a 4 pin plug on your motherboard.

Question 4

Will this fit the Thermaltake Armor Reve Gene?  I can't post a link, the newegg item number is N82E16811133210

Accepted Answer

I actually bought this to replace my top fan on an Antec 900. Little did I know that fan mounts are not universal. I just zip tied it to the top grate lol. As for your specific case, it looks like there are four mounting screws on the top grate, in which case it will mount.

Question 5

Does 3/4 pin connector mean I can plug in the 4-pin connector, and my motherboard will be able to control the fan speed?

Accepted Answer

Yes. U can control the mb fan headers via the bios

Question 6

Will this be compatible with the mounting brackets of a Hyper212 Evo cooler? I know the EVO uses a 120mm fan and I'm pretty sure it's all fairly standard, I just want to be sure.

Accepted Answer

no,this fan will be 80mm too large,which is a very large amount.This fan is too big for that,way too big,plus it wouldn't pass air through a heat sink very effectively anyway since this is not a static pressure fan,so if it WERE the right size,it still would not work (very well).

Question 7

I want to replace the side panel fan on the Cooler Master HAF X, will this fit?

Accepted Answer

yea that fan will fit in your case. The fan is the same standard dimensions as a stock 200 mm fan.

Question 8

Considering buying 2 of these fans to put on top of my NZXT Phantom 530 case. Says i can do 2x200mm but im just worried about compatibility issues. By any chance has anyone tried 2 on top or know if they both fit fine?

Accepted Answer

But the 200mm Cooler Master 200mm fan that comes with the Cosmos glows blue and has 120mm mounting points that to a metal bracket.

Any other 200mm fans with 120mm mounting points?

Question 9

Will this fan fit in the top of my HAF X? The specs say that the top takes a 200mm,but the side is 200mm and they don't look the same.

Accepted Answer

If the case specs say that a 200mm case fan will fit there then yes it will fit. I had this in my corsair 500R on the side and it sat in there just like the stock 200mm that was in there.

Question 10

Will this fan fit the top of a Cooler Master HAF XB EVO LAN box?

Accepted Answer

The mounting holes are 154mm by 154mm.   If you don't know the spacing of your mounting holes, measure them!  The fan itself is 200mm x 30mm.

Brand	COOLER MASTER
Model	R4-MFJR-07FK-R1

Fan Counts	1 Fan
Fan Controller	No Controller
Type	Case Fan
Compatibility	Case
Fan Size	200mm
Fan Thickness	30mm
Bearing Type	Sleeve
RPM	700 RPM
Air Flow	110 CFM
Noise Level	19 dBA
Power Connector	3 / 4 Pin

Cooler Master MegaFlow 200 - Sleeve Bearing 200mm Silent Fan for Computer Cases (Black)

Learn more about the Cooler Master R4-MFJR-07FK-R1

Customer Reviews of the Cooler Master R4-MFJR-07FK-R1

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16835103178