Valuelink
DBPOWER DJS50 car jumper starter
With up to 800A peak current and 18,000mAh capacity, this jump starter is able to boost up to 7.2L petrol or 5.5L diesel engine. It's also a battery bank to charge your phone or tablet via two USB-A ports, or power your laptop using a DC output. A built-in flashlight is capable of three modes including solid light, blink, and SOS flash. This gadget also has an integrated compass, plus an LCD display for battery status like remaining battery level and output voltage.
Easier to Read Battery Level
Different from usual jumper starters on the market, the DBPOWER jumper starter has a built-in LCD screen to help display readout more intuitively, it can easily tell you the exact figure. That is much more convenient than other jumper starters which only have 4 bars to let you estimate the power percentage.
Function to Charge Laptops
One of the extra functions designed for the jump starter: it comes with an 8-1 adapter to let you charge the laptops easily using the jump starter. It can not only charge mobile phones and tablets but can also be used to provide power for laptops (NOT FOR MAC BOOK).
Not Get Lost in the Wild
What's more, the jump starter even has a compass on the surface to help users read directions in the wild. When you go hiking, the jump starter can not only offer power for your electronic equipment, it can also lead the way with the compass. What a multi-functional device!
Perfect Journey Companion in Toolbox
Intelligent cable designed with 8 kinds of protections to ensure operation safety for users: over current protection, short circuit protection, overload protection, over-voltage protection, over-charge protection, etc.
Reverse Connection Protection
Despite 8 kinds of protections of the cable, it also has a "DO" connector. With the connector, users can not connect the jumper cable with the battery pack if they are doing steps wrongly. So the battery itself will not provide any power while the wrong connection. Users can easily figure out the mistake and correct the steps. The safety use can be protected in this case even though sometimes you may carelessly reverse connected the jumper cable.
ATTENTION
1. Please charge the jump starter to 100% at the first time use, it will perform best when its battery is fully charged. If the LED Fuel Gauge shows less than 100% charge, it is recommended to fully recharge your battery.
2. Don't jump start any engine that exceed the maximum petrol engine 6.5L, and diesel engine 5.2L.
3.Connect red clamp to positive (+) terminal and black clamp to negative (-) terminal of the car battery.
4. You can only start the car when light shows green.
5. Do not crank the engine for more than 3 seconds. The jump-start feature is designed for short time operation only.
6. Failure to follow the instruction may cause damage to the product.
7. Always disconnect the jump-start cables from the jump starter when they are not being used.
8. The jump-start feature is designed for short term operation only. Allow the jump starter to cool down for at least 30 seconds to 1 minute after each jump-start.