Dashboard Mounting Disc
An 82 mm (3.23 in) disc with a smooth top for suction-cup mounts, a thin stainless-steel core and 3M VHB adhesive backing. Mount not included.
Introduction to product features
Equipped with a stainless steel interlayer, it is heat-resistant and can be bent freely. It effectively addresses the product pain points of ordinary hard pads, such as seesawing and poor adhesion. Coupled with high-quality 3M high-temperature adhesive tape, it is tailored for the harsh environment of vehicles. The bendable stainless steel interlayer can evenly receive the suction force of the suction cup, ensuring a tight and stable installation, perfectly fitting mild curved surfaces
Product introduction and usage
A Strong Bond Starts with a Clean, Dry Surface
A secure bond starts with a clean, dry surface. Wipes remove light dust only. For oil, wax or dashboard dressing, use dashboard-safe mild detergent and a clean towel. Remove all residue and dry completely.
Does this include a suction-cup mount?
No. Only the mounting discs are included. The smooth top provides a surface for a compatible suction-cup mount, which is sold separately.
Are the included wipes enough for cleaning?
Use the wipes for light dust only. For oil, wax or dashboard dressing, use dashboard-safe mild detergent and a clean towel. Remove all residue and let the surface dry completely. Never apply while damp.
What should I do before installation in cold conditions?
If cold, gently warm both the disc and dashboard before installation. Make sure both are above 59°F (15°C). The surface must be clean and completely dry before applying the disc.
How long should I press the disc and wait before use?
Flat: press firmly for 30 seconds. Curved: hold both edges down for 5-10 minutes. Then leave the disc unloaded for 48 hours; no need to keep pressing. Remove the clear top film before attaching and locking the suction-cup mount.
Dashboard Mounting Disc
An 82 mm (3.23 in) disc with a smooth top for suction-cup mounts, a thin stainless-steel core and 3M VHB adhesive backing. Mount not included.
Product introduction and usage
Introduction to product features
Equipped with a stainless steel interlayer, it is heat-resistant and can be bent freely. It effectively addresses the product pain points of ordinary hard pads, such as seesawing and poor adhesion. Coupled with high-quality 3M high-temperature adhesive tape, it is tailored for the harsh environment of vehicles. The bendable stainless steel interlayer can evenly receive the suction force of the suction cup, ensuring a tight and stable installation, perfectly fitting mild curved surfaces
A Strong Bond Starts with a Clean, Dry Surface
A secure bond starts with a clean, dry surface. Wipes remove light dust only. For oil, wax or dashboard dressing, use dashboard-safe mild detergent and a clean towel. Remove all residue and dry completely.
Does this include a suction-cup mount?
No. Only the mounting discs are included. The smooth top provides a surface for a compatible suction-cup mount, which is sold separately.
Are the included wipes enough for cleaning?
Use the wipes for light dust only. For oil, wax or dashboard dressing, use dashboard-safe mild detergent and a clean towel. Remove all residue and let the surface dry completely. Never apply while damp.
What should I do before installation in cold conditions?
If cold, gently warm both the disc and dashboard before installation. Make sure both are above 59°F (15°C). The surface must be clean and completely dry before applying the disc.
How long should I press the disc and wait before use?
Flat: press firmly for 30 seconds. Curved: hold both edges down for 5-10 minutes. Then leave the disc unloaded for 48 hours; no need to keep pressing. Remove the clear top film before attaching and locking the suction-cup mount.