Question 1

What are the best motherboards and cooling solutions to pair with the DIYPC DIY-V3-ATX R case for a high-performance gaming build?

Accepted Answer

This case supports ATX, Micro ATX, and ITX motherboards, so you have flexibility to choose from most mid-range to high-end boards depending on your needs. For cooling, it fits CPU coolers up to 158mm tall and supports up to three fans including the pre-installed 120mm rear fan, which should be enough for most gaming builds that don’t require custom liquid cooling.

If you want to squeeze more performance or quieter operation, consider aftermarket air coolers that keep under the 158mm height limit or a compact AIO liquid cooler with a 120mm or 240mm radiator, but note the case doesn’t explicitly mention radiator support besides fans. Also, since the GPU max length is 295mm, pick your graphics card accordingly to avoid fitment issues.

Question 2

How does the DIYPC DIY-V3-ATX R case compare to the Phanteks Eclipse P300A in maintaining optimal GPU temperatures during 1080p gaming sessions?

Accepted Answer

The DIYPC DIY-V3-ATX offers decent airflow with its three-fan support and magnetic dust filter that helps keep dust out, which can aid GPU cooling during 1080p gaming. However, compared to the Phanteks Eclipse P300A, which is known for its mesh front panel and more aggressive airflow design, the DIYPC case might run slightly warmer on your GPU under load.

If keeping temps as low as possible is your priority, the P300A typically performs better due to its higher airflow potential. The DIY-V3-ATX is still capable, but using additional intake fans or ensuring good overall airflow setup will help maximize cooling efficiency during longer gaming sessions.

Question 3

What improvements in build space and expandability does the DIYPC DIY-V3-ATX R case offer over the previous DIY-V2 model?

Accepted Answer

The DIYPC DIY-V3-ATX R case improves build space primarily by supporting larger GPUs up to 295mm and CPU coolers up to 158mm, allowing for more high-performance components than the earlier V2 model. It also offers enhanced expandability with front IO ports including USB 3.0 alongside USB 2.0 and the ability to install up to three fans for better airflow.

Compared to the previous version, the addition of a magnetic dust filter on top is a practical upgrade for easier maintenance and cleaner internals. Keep in mind that while the expanded GPU clearance gives room for bigger cards, you'll want to check your specific component sizes, as some premium GPUs might still challenge this space.

Question 4

What is the recommended fan configuration and mounting process to achieve optimal airflow in the DIYPC DIY-V3-ATX R case?

Accepted Answer

The recommended fan setup for the DIYPC DIY-V3-ATX case is to use the pre-installed rear 120mm fan as an exhaust, ideally adding two intake fans at the front to promote good airflow through the case. This layout helps push cool air in from the front while expelling hot air out the back, making the most of the three-fan capability and supporting up to a 158mm CPU cooler and 295mm GPU.

Keep in mind that while front intake fans improve airflow, they can also draw more dust despite the magnetic dust filter on top, so regular cleaning helps maintain performance. If you plan on heavy gaming or overclocking, balancing intake and exhaust fans is key to avoid positive pressure buildup, which can trap heat instead of expelling it.

Type	ATX Mid Tower
Color	Black
Case Material	Steel
With Power Supply	No
PSU Mount	Top
Motherboard Compatibility	ATX / ITX / Micro ATX
Side Panel	no

Fan Options	2 x 120mm fans x front (Optional)
Pre-installed Fans	1 x 120mm Fan x Rear (Pre-installed)

Max GPU Length	295 mm
Max CPU Cooler Height	158 mm
Max PSU Length	140 mm
Dimensions	13.4" x 7.32" x 16.4" inch
Weight	8.1lbs

DIYPC DIY-V3-ATX Black USB3.0 ATX Mid Tower Computer Case w/ 1 x 120mm Fan x Rear (Pre-Installed)

Learn more about the Detailed Specifications

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Internal 3.5" Drive Bays	1
Internal 2.5" Drive Bays	1
Expansion Slots	7

Model
Brand	DIYPC
Part Number	DIY-V3-ATX

Item#: N82E16811353299