Your Browsing History



| Best Seller Ranking | #2 in Action Camera Accessories |
|---|
| Brand | DJI |
|---|---|
| Model | DJI Mic 3 (2 TX + 1 RX + Charging Case) |
| Part Number | CP.RN.00000480.03 |
|---|
| Dimensions | Transmitter 28.77×28.34×16.35 mm (L×W×H) (with magnet) Receiver 53.85×28.69×22.00 mm (L×W×H) Charging Case 106.30×42.50×59.20 mm (L×W×H) |
|---|---|
| Weight | Transmitter 16 g (with magnet) Receiver 25.1 g Charging Case 164.1 g (charging case only) |
| Specification | Transmitter Battery Type: Li-ion Battery Capacity: 137 mAh Battery Energy: 0.531 Wh Battery Voltage: 3.87 V Charging Specification: Max 5 V Charging Temperature: 5° to 45° C (41° to 113° F) Operating Temperature: -10° to 45° C (14° to 113° F) Charging Time: Approx. 50 minutes Operating Time: 8 hours Receiver Battery Type: Li-ion Battery Capacity: 275 mAh Battery Energy: 1.065 Wh Battery Voltage: 3.87 V Charging Specification: Max 5 V Charging Temperature: 5° to 45° C (41° to 113° F) Operating Temperature: -10° to 45° C (14° to 113° F) Charging Time: Approx. 50 minutes Operating Time: 10 hours Charging Case Battery Type: Li-ion Battery Capacity: 1950 mAh Battery Energy: 7.55 Wh Battery Voltage: 3.87 V Charging Specification: Max 5 V, 3 A Charging Temperature: 5° to 40° C (41° to 104° F) Operating Temperature: 5° to 45° C (41° to 113° F) Charging Time: Approx. 1.5 hours Charging Cycles for TX and RX: When charging two transmitters and one receiver simultaneously, a fully charged charging case can fully charge them for approx. 2.4 times. |
|---|
| Feature | General Polar Pattern: Omnidirectional Frequency Response: Low Cut Off: 20 Hz-20 kHz (encoded) Low Cut Off: 20 Hz-24 kHz (lossless) Low Cut On: 100 Hz-20 kHz (encoded) Low Cut On: 100 Hz-24 kHz (lossless) Microphone Sensitivity: Microphone Capsule: -36±1 dBV@1 kHz, 94 dB SPL Signal-to-Noise Ratio (SNR): 72 dB Maximum Sound Pressure Level (SPL): 126 dB SPL@1% THD, 130 dB SPL@10% THD Sampling Frequency: 48 kHz Bit Depth: 32-bit float/24-bit (switchable) Equivalent Noise: 22 dBA Monitor Interface Output Power: Max Output Power: 20 mW@1 kHz, 32 O |
|---|
| First Listed on Newegg | November 17, 2025 |
|---|