Your Browsing History
Visit ELEGOO US Store
FOLLOW
ELEGOO Saturn S Resin 3D Printer 9.1 inch 4K Mono MSLA LCD 3D Resin Printers Build Volume 7.71x4.80x8.26 inch/ 196x122x210mm
- 9.1inch True 4K Mono Screen: 4098 x 2560 pixels ultra high resolution, per layer exposure takes only 2 seconds, more details and less time. The lifespan of Mono LCD is more than 2000 hours, 4 times that of RGB screen
- Larger Printing Size: 196x122x210mm/7.71x4.80x8.26in large build volume, you can print a bigger complex model or multiple small models at a time
- Solid Print Quality: Z-axis Double linear railway brings super stable movement and 0.00125mm accuracy; 54 Matrix LED offer more powerful and more uniform UV light; All-new design thinner, scratch-resistant and durable PFA release film greatly improves the success rate of printing
- More Upgrades than SATURN: add activated carbon air purifier; XY axis accuracy increased from 50m to 48m; the print size has increased by 8.5%; release film is upgraded from FEP film to PFA film
- ELEGOO Official Tech Support: Enjoy the warranty and technical support from ELEGOO official, directly contact online or email to us for any support
Overview
Specs
Reviews
See all Q & A 
Any questions? Our AI beta will help you find out quickly.
Try me now
ELEGOO Saturn S 3D Printer
Basic Parameters
XY Resolution: 0.048 mm [4K 4098*2560]
Z Axis Accuracy: 0.00125 mm
Layer Thickness: 0.01 - 0.15 mm
Printing Speed: 30-70mm/h
Power Requirements: 100-240V; 50/60Hz
Dimensions: 11.02 in (L) * 9.44 in (W) * 17.55 in (H); 28cm (L) *24cm (W) * 44.6 cm (H)
Build Volume: 7.71 in (L) * 4.80 in (W) * 8.26 in (H); 196mm (L) *122mm (W) *210mm (H)
Weight: 11kg (24lbs)
System: EL3D- 3.0. 1
Technology: LED Display Photocuring
Light source: UV Integrated Light (wavelength 405nm)
Slicer Software: CHITUBOX
Connectivity: USB
Operation: 3.5 Inch Touch Screen
Precautions
Please do not remove the black protective tape around the edges of the screen.
Before printing, please peel off the transparent protective film on the screen.
Please do NOT peel off the polarizer otherwise it would cause serious damage to the LCD.
Notice
Please Keep the Saturn S 3D Printer and its accessories out of the rach of children.
When you use the printer for the first time, you would need to adjust it before printing (Unbox and Test).
If the printing failed, you would have to clean the resin tank and change resin otherwise it may cause damage to your printer.
Please only fill 1/3 of the resin tank only and don't over fill.
Please use 95% (or higher) ehtyl alcohol or isopropyl alcohol to wash your model unless you are using water washable resin.
Please use the printer indoors and avoid direct sunlight and dusty environment.
Please keep your printer away from water or damp environment.
Please wear a mask and gloves before using and avoid direct skin contact.
Please don't disassemble the Saturn 3D Printer by yourself.
If you want to print models with sharp edges please be careful when removing it from the build platform.
Basic Parameters
XY Resolution: 0.048 mm [4K 4098*2560]
Z Axis Accuracy: 0.00125 mm
Layer Thickness: 0.01 - 0.15 mm
Printing Speed: 30-70mm/h
Power Requirements: 100-240V; 50/60Hz
Dimensions: 11.02 in (L) * 9.44 in (W) * 17.55 in (H); 28cm (L) *24cm (W) * 44.6 cm (H)
Build Volume: 7.71 in (L) * 4.80 in (W) * 8.26 in (H); 196mm (L) *122mm (W) *210mm (H)
Weight: 11kg (24lbs)
System: EL3D- 3.0. 1
Technology: LED Display Photocuring
Light source: UV Integrated Light (wavelength 405nm)
Slicer Software: CHITUBOX
Connectivity: USB
Operation: 3.5 Inch Touch Screen
Precautions
Please do not remove the black protective tape around the edges of the screen.
Before printing, please peel off the transparent protective film on the screen.
Please do NOT peel off the polarizer otherwise it would cause serious damage to the LCD.
Notice
Please Keep the Saturn S 3D Printer and its accessories out of the rach of children.
When you use the printer for the first time, you would need to adjust it before printing (Unbox and Test).
If the printing failed, you would have to clean the resin tank and change resin otherwise it may cause damage to your printer.
Please only fill 1/3 of the resin tank only and don't over fill.
Please use 95% (or higher) ehtyl alcohol or isopropyl alcohol to wash your model unless you are using water washable resin.
Please use the printer indoors and avoid direct sunlight and dusty environment.
Please keep your printer away from water or damp environment.
Please wear a mask and gloves before using and avoid direct skin contact.
Please don't disassemble the Saturn 3D Printer by yourself.
If you want to print models with sharp edges please be careful when removing it from the build platform.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ELEGOO US Store Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...