ENERMAX ETS-T40-W White 120mm Cluster CPU Cooler with Cluster APS PWM Fan

Pros: Have to start off by saying this thing looks awesome! If you're looking for a CPU cooler that goes perfectly with white/black setup then this one if for you! The cooler comes packed in a fairly sturdy box with cardboard bracing the cooler and the sides of the box. Not bad packaging, but not the best either. This cooler is very well built, and sturdy. You can see the little attention to detail the makers put into this thing (for example it has little ventilation holes in the top to help ventilate air out of the top of the cooler, as well as out of the sides). It is quite large, so make sure you read the dimensions and make sure it will fit your case. You may or may not require low profile RAM due to the size depending on your setup, so again, be mindful of this. As for temperature performance this cooler excels! Even on a CPU that is fully over-clocked the max idle temps run around 30C, while the full load temps run from the mid to high 50s and sometimes barely hit 60. (also note, this depends on the overall airflow of your current setup!) The fan on this cooler can be easily removed and even has detachable blades for easy cleaning. LEDs can be turned on and off via a little switch, or you can adjust your preferred fan performance on via a switch on the back. There's a quiet mode, a balanced mode and a performance mode that each have their own individual level of noisiness. The performance will be the loudest as it runs the fan upwards of 2,200rpm, but this fan is extremely quiet in the lower RPM range. Additionally, you can add a second fan for a push-pull configuration for even more cooling efficiency and aesthetics(but be aware of the additional size increase as well!). Overall, a great CPU cooler that performs well and looks great while doing it!

Cons: None.

Pros: Beautiful piece of work! Keeps my new Intel 5960X nice and cool with Arctic Silver. Haven't tried OC'ing the CPU yet, but I'm confident I can get at least a few hundred extra MHz with this! Love the white LEDs!

Cons: Not as big as I would have liked it to be going into a full tower case, but it does leave room for the other components. Mounting system for 2011-3 was a bit odd, but nothing compared to LGA775 that I was upgrading from. Very glad I didn't have to deal with a custom backplate! Also a bit annoyed that the ENERMAX logo points in the opposite direction as the rest of the text on my mobo, but that's just nitpicking. Wish it had come with the second fan by default. Comes with the mounting gear already, just seems incomplete without it there.

Overall Review: BARELY clears the heat sinks on the ASUS X99-Deluxe, but barely is good enough for me!

Pros: Not too loud Looks stunning Matches most builds Let's me OC easily

Cons: Nun.

Pros: Runs quiet and looks great.

Cons: None so far.

Pros: was the same size that it says it is in the specifications, fits the case i have and keeps my 12 Core APU under 40c when playing Far Cry 4 at ultra. Pretty quite too which is a big upgrade from the stock cooler. Also did i mention its white XD. PLEASE READ!! look at the specifications and measure your case before buying this. tired of people who are complaining it wont fit in their case because its to big.

Cons: non really other then the logo on top of the heat sink was scratched out of the box but you can't see it really so not even a big deal.

Overall Review: *THIS FITS FM2+ there is a review of someone saying this does not fit FM2+ and he needed to go find a FM2 board to use it.....-_- the FM2+ and FM2 sockets have the same mounting points. im using a MSI A88Xm gaming board and its a FM2+ board and you know what.....it fits great on the board and works, that guy should take his tech level dropped down 2 notches if he does not know this, but yes it fits FM2+ and i feel his review should be removed do to the fact its the only one where the guy has no idea what he is talking about....sorry for my rage im done now and BTWs this cooler out did the NZXT X41 kraken i had before.

Pros: Keeps my FX-6300 at 19 C. at idle, highest I've seen it was 45 C. while I was encoding and ripping a DVD. My FX-6300 is overclocked to 4.3 gigahertz.

Cons: None, so far.

Pros: -Quiet -Sleek -Cooling ability -Easy installation

Cons: The heatsink plate that has contact with the top of the processor has several creases where it's not perfectly flat. This causes thermal paste to travel (in the creases) to the ends of the heatsink, sometimes causing paste to go off the edge of the processor. Not really a huge deal if you use very little paste, however if a novice uses this cooler and uses a little too much paste, it can cause some damage if the paste were to get to the contact pins of the processor. I may have just gotten a dud, regardless I was a bit disappointed when I saw how it spreads the paste.

Overall Review: All in all it is a great cooler. Just wish the quality control was a little better.

Pros: This is a very nice CPU fan. It worked out well inside a full sized tower. I currently have one fan attached which is doing a great job. It also comes with 2 more fan clips if you'd prefer adding an additional fan.

Cons: There's no real con with this CPU cooler except the fact that it's so large. I don't believe it would fit in anything but a full size tower. I've build computers with heat sinks this large so I was able to anticipate it.

Overall Review: Awesome CPU heat sink and fan! I would defiantly recommend it.