- Free 30-day Returns
Meet Your Seller
EMX ULT-PLG Vehicle Loop Detector 12-24VDC Dual Output Detect-on-Stop | For automatic gates, overhead doors and access control; ULTRAMETER display with 10 sensitivity levels and 4 frequencies
- Plug-in vehicle loop detector for inductive loops in automatic gate, overhead door and access-control systems; suitable for center, reverse and exit loop positions
- ULTRAMETER display shows the optimum sensitivity setting for easier setup; 10 sensitivity levels provide fine adjustment for reliable vehicle detection
- Dual solid-state open-collector outputs: presence output plus configurable Output B for presence, loop fault, pulse on entry or pulse on exit
- Detect-on-Stop detects only after a vehicle stops on the loop, helping ignore cross traffic in tight spaces; also supports ASB and fail-safe/fail-secure modes
- 12-24 VDC power, 15 mA operating current, 4 frequency settings and 20-2000 µH loop inductance range; operates from -40°F to 180°F
Any questions? Ask CelesteSM will help you find out quickly.
The ULT-PLG is a compact plug-in vehicle loop detector for inductive loops used with automatic gates, overhead doors and access-control systems. It can be used in center, reverse and exit loop positions and automatically tunes to the loop at power-up. The ULTRAMETER display indicates the optimum sensitivity setting, while 10 sensitivity levels and 4 frequency selections allow fine adjustment and help reduce crosstalk in multi-loop installations. The detector provides a solid-state presence output and a configurable second output for presence, loop fault, pulse on entry or pulse on exit. Detect-on-Stop allows detection only after a vehicle has stopped on the loop, helping ignore cross traffic in tight spaces. Additional options include automatic sensitivity boost, fail-safe/fail-secure operation and normal or infinite presence. Power: 12-24 VDC. Current: 15 mA. Loop inductance: 20-2000 µH. Operating temperature: -40°F to 180°F. Dimensions: 3.0 x 0.9 x 2.75 in. The unit is a single-loop-channel module with a 10-pin female connector and ABS housing. The induction loop and operator are separate components. Do not use Detect-on-Stop, normal timed presence or fail-secure mode for reversing-loop protection.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Temonick shop Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory















