GIGABYTE GA-P41T-D3P Motherboard Supports 45nm Intel Core 2 multi-core processors with FSB 1333 MHz

Support for an Intel® Core™ 2 Extreme processor/ Intel® Core™ 2 Quad processor/Intel® Core™ 2 Duo processor/ Intel® Pentium® processor/Intel® Celeron® processor in the LGA775 package (Go to GIGABYTE's website for the latest CPU support list. ) L2 cache varies with CPU Front Side Bus 1333/1066/800 MHz
FSB Chipset North Bridge: Intel® G41 Express
Chipset South Bridge: Inte® ICH7 Memory 2 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory * Due to standard PC architecture, a certain amount of memory is reserved for system usage, the actual memory size displayed will be less than 4 GB. Dual channel memory architecture Support for DDR3 1333(O. C. )/1066/800 MHz memory modules Support for non-ECC memory modules (Go to GIGABYTE's website for the latest supported memory speeds and memory modules. ) Audio Realtek ALC888/889/892 codec High Definition Audio 2/4/ 5.1 / 7.1 -channel * To configure 7.1 -channel audio, you need connect with the port of HD Audio standard via front panel and enable the multi-channel audio feature through the audio driver. Support for S/PDIF Out Support for CD In LAN 1 x Realtek RTL8111C/D/E chip (10/100/1000 Mbit) Expansion Slots 1 x PCI Express x16 slot, running at x16 3 x PCI Express x1 slots 3 x PCI slots
Storage Interface South Bridge: 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices iTE
IT8718 chip: 1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB South Bridge: Up to 8 USB 2.0 / 1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers) Internal I/O Connectors 1 x 24-pin ATX main power connector 1 x 4-pin ATX 12V power connector 1 x floppy disk drive connector 1 x IDE connector 4 x SATA 3Gb/s connectors 1 x CPU fan header 2 x system fan headers 1 x power fan header 1 x front panel header 1 x front panel audio header 1 x CD In connector 1 x S/PDIF Out header 2 x USB 2.0 / 1.1 headers 1 x clearing CMOS jumper Back Panel Connectors 1 x PS/2 keyboard port 1 x PS/2 mouse port 1 x parallel port 1 x serial port 1 x coaxial S/PDIF Out connector 4 x USB 2.0 / 1.1 ports 1 x RJ-45 port 3 x audio jacks (Line In/Line Out/Microphone) I/O Controller iTE IT8718 H/W Monitoring System voltage detection CPU/System temperature detection CPU/System/Power fan speed detection CPU overheating warning CPU/System/Power fan fail warning CPU fan speed control * Whether the CPU fan speed control function is supported will depend on the CPU cooler you install.