Your Browsing History
Quick View
Fluke Networks 26100900 Pro3000 Analog Probe
- Specifications: Pro3000 Analog Toner Specifications User interface: Slide switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED Solid Frequency: 1000 Hz nominal Alternating Frequency: 1000/1500 Hz nominal Over Voltage Protection: 60 Vdc in Toner/Polarity Mode Output Power in Tone Mode: 8 dbm into 600 ohms Output Voltage Level in Continuity Mode: 8 Vdc with fresh battery Battery: 9V alkaline Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C Case dimensions: 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm) The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally bei...
- Model #: 26100900
- 510.29Dh –
- Free Shipping
Quick View
Fluke Networks 19800009 TS19 Telephone Test Set with Angled Bed-of-Nails Clips
- Specifications: Electrical Loop Limit 2.4 kOmaximum at 48 VDC (nominal 15 mA minimum loopcurrent) DC Resistance (Talk Mode) 150 Otypical at 80 mA current AC Impedance (Monitor Mode) Low impedance (Ring position) 600 Oat 1 KHz typical High impedance (HI Z position) 100 kOminimum at 1 KHz Rotary Dial Output 10 pps .5 pps Pulsing Rate 60 % ± 2 % Percent Break 800 ms typical Interdigit Interval Leakage During Break > 50 kO DTMF Output ±1 % maximum Tone Frequency Error Level per Tone Pair dBm maximum, - dBm minimum High versus Low Tone Difference 4 dB maximum Physical Length 8.75 in (22.2 cm) Width 2.375 in (6.03 cm) Height 3.375 in (8.57 cm) Weight 10.8 oz (.307 kg) maximum Environmental Temperature Operating: -5 °C to °C Storage: -40 °C to °C Drop 1 meter, 4 times Altitude To 3,000 meters (10,000 feet) maximum Relative Humidity 10 %to 80 % (non...
- Model #: 19800009
- 1,004.84Dh –
- Free Shipping
Quick View
Fluke Networks JR-LEV-2 JackRapid Punch Down Tool for Leviton 61110 5G110 6110G
- Specifications: Application/Usage: Cable Termination Additional Information: Unique design easily accommodates close-to-wall installation. Replaceable blade head for use with multiple jack types. For Leviton 61110, 5G110, 6110G.
- Parts: 1 year limited
- Model #: JR-LEV-2
- 943.94Dh –
- Free Shipping
Quick View
Fluke Networks 11289000 Electrical Contractor Telecom Kit II with Pro3000 Analog Tone and Probe Kit and Case
- Specifications: These kits contain essential industry standard telecommunications tools and test equipment. D814 industry standard punchdown tool for reliable terminations EverSharp 66/110 cut blade provides flexibility for different block and jack terminations Cable Stripper quickly rings and slits many types of cable Use the Probe Pic to check for loose or damaged connections Cut and strip wire cleaner and faster with the Electricians D-Snips Connect to jacks for testing with the standard 4-Wire Modular Adapter A soft zippered pouch keeps your tools all in one convenient place Fluke Networks' Electrical Contractor Telecom Kits are comprised of industry standard telecommunications tools and test equipment, in a durable cordura case. The kits are designed for technicians who install, test and troubleshoot phone and data lines. Includes a Pro3000 Analog Ton...
- Model #: 11289000
- 1,720.04Dh –
- 477.46Dh Shipping
Quick View
Fluke Networks 10061501 Networks D914S Impact Tool with EverSharp 110, EverSharp 66 blade & free blade
- Package Contents: D914S 10061501 Impact Tool EverSharp 110 Blade EverSharp 66 Blade Free Blade
- Parts: 1 year limited
- Model #: 10061501
- 659.39Dh –
- Free Shipping
Quick View
Fluke Networks 11230002 Cable Stripper (round cable)
- Parts: 1 year limited
- Model #: 11230002
- 306.59Dh –
- Free Shipping
Quick View
Fluke Networks 11291000 Pro-Tool Kit IS40 with Punch Down Tool
- Package Contents: D814 Impact Tool Electricians D-Snips Cable Stripper EverSharp 66 / 110 Cut Blade Probe Pic Carrying case
- Parts: 1 year limited
- Model #: 11291000
- 1,060.54Dh –
- 367.27Dh Shipping
Quick View
Fluke Networks 11212530 Networks Modular Crimper
- Package Contents: 78408N
- Parts: 1 year limited
- Labor: Lifetime
- Model #: 11212530
- 370.20Dh –
- 367.27Dh Shipping
Quick View
Fluke Networks MT-8200-49A MicroMapper Network Testing Device
- Specifications: Test Services: Fault Display High Speed Testing Generation of two tones for tracing cables and locating hidden cables Length Measurement: 15.75" to 656 ft Twisted Pair Ports: 1 x RJ-45 Status Indicators: 5 green LEDs for pairs and shield display 6 red LEDs (TONER, SHORT, REVERSED, MISWIRE, SPLIT PAIRS, and LOW BATTERY) Batteries: Alkaline AAA Features Features Auto-sleep mode Generation of two tones for tracing cables and lication hidden cables Packaging Package Contents MicroMapper MT-8200-49A Network Testing Device MicroMapper Remote Patch Cable 6-Volt Alkaline Battery User Guide The MicroMapper quickly and easily tests twisted pair cabling, giving you visibility of opens, shorts, crossed, reversed and split pairs. Just push the TEST button and MicroMapper will automatically scan all wire pairs for any existing faults...
- Model #: MT-8200-49A
- 791.69Dh –
- Free Shipping
Quick View
Fluke Networks MS2-100 MicroScanner2 VDV and Network Cable Tester
- Specifications: Test Services: Graphical wiremap, length, cable ID, and distance to fault displayed on one screen. Tests all common media types including RJ11, RJ45, Coax, with no need for adapters. Locates virtually any cable or wire pair with IntelliTone digital and analog toning. Verifies today's media services, including 10/100/1000 Ethernet, POTS, and PoE. Integrated rubber holster enhances grip and makes it durable enough for the toughest jobs. Large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet. Length Measurement: 11.81" to 1509 ft Ports: RJ-45 10/100/1000Base-T Network Connectivity Media: UTP Display Screen: Monochrome LCD with backlight Batteries: AA Standard Dimensions: 3.00" x 6.40" x 1.40" Weight (Approximate): 12.80 oz
- Package Contents: 78522N
- Parts: 1 year limited
- Labor: 1 Yea...
- Model #: MS2-100
- 3,279.14Dh –
- Free Shipping
Quick View
Fluke Networks 11293000 Pro-Tool Kit IS60 with Punch Down Tool
- Package Contents: Pro-Tool Kit IS60 D914S Impact Tool D-Snips Cable Stripper Maglite Sharpie and EverSharp 66/110 cut blade
- Parts: 1 year limited
- Model #: 11293000
- 1,840.64Dh –
- Free Shipping
Quick View
Fluke Networks 10055501 D814 Series Automatic Impact Tool
- Specifications: D814 impact tool with EverSharp 110, EverSharp 66 blade & free blade
- Parts: 1 year limited
- Model #: 10055501
- 501.32Dh –
- 367.27Dh Shipping
Quick View
Fluke Networks 11290000 Electrical Contractor Telecom Kit I with TS30 Telephone Test Set
- Parts: 1 year limited
- Model #: 11290000
- 2,722.64Dh –
- Free Shipping
Quick View
Fluke Networks D914 10051100 Impact Tool
- Specifications: Product Type: Punch Down Tool
- Package Contents: D914 10051100 Impact Tool EverSharp 66 Blade
- Parts: Lifetime Limited
- Model #: 10051100
- 462.76Dh –
- 257.08Dh Shipping
Quick View
Fluke Networks FQM-M Fiber Quick Map, Main Multimode Fault Finder
- Specifications: Product Type:Cable Analyzer Number of Batteries Supported:2
- Package Contents: Mulitmode Fiber Distance and Fault Locator Screw on Interchangeable SC Adapter 4-language Quick Reference Guide Safety Instruction Manual Batteries
- Model #: FQM-M
- 12,368.37Dh –
- 477.46Dh Shipping
Quick View
Fluke Networks MicroScanner PoE Cable Verifier
- Specifications: Product Type:Cable Analyzer
- Package Contents: MicroScanner PoE Cable Verifier Getting Started Guide (10 languages) 2 x AA Alkaline Batteries Carry Pouch
- Parts: 1 Year
- Model #: MS-POE
- 4,485.29Dh –
- 367.27Dh Shipping
Quick View
Fluke Networks CIQ-WM CableIQ Main Wiremap Adapter (replacement part for lost or damaged unit)
- Model #: CIQ-WM
- 979.64Dh –
- Free Shipping
Quick View
LinkSprinter™ Network Tester MODEL 300
- Package Contents: 41338Y
- Parts: 1 Year
- Labor: 1 Year
- Model #: LSPRNTR-300
- 2,196.59Dh –
- Free Shipping
Quick View
Fluke Networks MT-8203-20 Test Leads with Bed of Nails Set of two Banana Jack test leads with piercing pin 'Bed of Nails' alligator clips with vinyl sleeves
- Specifications: Part Number MT-8203-20 Item Weight 3.2 ounces Product Dimensions 12 x 3.8 x 3.1 inches Item model number MT-8203-20 Size With Bed of Nails Set Item Package Quantity 1 U-shaped nose for blade-shaped terminals Notched jaw for gripping screw heads, bare wire or terminals Serrated teeth for gripping threaded or wire wrapped terminals Cluster of sharp needles for piercing small gauge wires (22-28 AWG) Large piercing needle for penetrating large gauge wires
- Parts: 1 year limited
- Model #: MT-8203-20
- 235.21Dh –
- 257.08Dh Shipping
Quick View
Fluke Networks NFC-CUBE Network/ PC Service Tools
- Model #: NFC-CUBE
- 312.34Dh –
- 697.84Dh Shipping
Quick View
Fluke Networks D914S 10061503 Impact Tool
- Specifications: Product Type:Punch Down Tool
- Package Contents: D914S 10061503 Impact Tool EverSharp 110 Blade EverSharp 66 Blade BIX
- Parts: Lifetime
- Model #: 10061503
- 757.04Dh –
- Free Shipping
Quick View
Fluke Networks TS30 30800001 Network Testing Device
- Specifications: Product Type:Network Testing Device
- Model #: 30800001
- 1,882.02Dh –
- 367.27Dh Shipping
Quick View
Fluke Networks 10230101 8-Wire In-line Modular Adapter with K-Plug
- Specifications: Fluke Networks in-line banjo modular adapters allow you to easily complete testing and obtain circuit access on working lines without disrupting service. Each banjo modular adapter has a number of advantages including angled copper contacts that prevent alligator clips from coming off during testing, small holes in each contact for easy probe insertion, and clear circuit markings on the sides and bottom of the unit. Our standard Banjo Modular Adapter has four clearly marked contacts for proper termination, and provides field technicians with a quick connection to modular telephone jacks using any standard butt-set equipped with spring clips.
- Model #: 10230101
- 293.07Dh –
- 257.08Dh Shipping
Quick View
Fluke Networks TS52 PRO 52801001 LCD Test Set
- Specifications: Product Type:Network Testing Device
- Model #: 52801001
- 2,190.29Dh –
- Free Shipping
Quick View
Fluke Networks CableIQ Remote Identifier Kit, Numbers 2-4
- Model #: CIQ-IDK24
- 1,893.59Dh –
- 257.08Dh Shipping
Quick View
Fluke Networks VisiFault Visual Fault Locator
- Specifications: Product Type:Cable Analyzer
- Model #: 2134722
- 2,402.67Dh –
- 257.08Dh Shipping
Quick View
Fluke Networks 44500000 Electrician's Snips, high-quality forged steel for strength and durability.
- Parts: 1 year limited
- Model #: 44500000
- 204.36Dh –
- 367.27Dh Shipping
Quick View
Fluke Networks JackRapid JR-ORT-2 Termination Tool
- Specifications: Product Type:Termination Tool
- Model #: JR-ORT-2
- 613.17Dh –
- 257.08Dh Shipping
Quick View
Fluke Networks 10176500 EverSharp 110 Punch Down Tool Blade for D914 Series and D814 Series Impact Punch Down Tools
- Specifications: Compatibility: Fluke Punchdown Tools D914 D914S D814 D214
- Model #: 10176500
- 227.50Dh –
- 257.08Dh Shipping
Quick View
Fluke Networks Pocket Toner NX8 PTNX8-CT Cable and Telephone Kit
- Specifications: Number of Batteries Supported:1 Product Type:Cable Analyzer Network (RJ-45):No
- Package Contents: NX8 Unit Toner 8 x ID Caps 66 Block Adapter RJ-11 Adapter Dial Tone Detective Alligator Clips with RJ-11 Adapter F-type (F, 9-M-push, M-71, Speed 81) Adapters 1 x AAA Battery Deluxe Case with Belt Clip
- Model #: PTNX8-CT
- 678.73Dh –
- 367.27Dh Shipping
Quick View
Fluke Networks NFC-KIT-CASE Fiber Optic Cleaning Kit with Case
- Package Contents: Fiber Optic Cleaning Kit Cleaning Cube with Wipes 10 x Cards with Sealed Cleaning Zones Solvent Pen 2.5mm Port Cleaning Swabs 1.25mm Port Cleaning Swabs in a Rugged Carrying Case
- Parts: 1 year limited
- Model #: NFC-KIT-CASE
- 1,124.54Dh –
- Free Shipping
Quick View
Fluke Networks NFC-SWABS-1.25MM Fiber Optic LC and MU Port Cleaning Swabs
- Specifications: Compatibility: Fiber Optic Connectors: LC Port MU Port
- Package Contents: 78157N
- Model #: NFC-SWABS-1.25MM
- 258.35Dh –
- 367.27Dh Shipping
Quick View
Fluke Networks 10055110 D814 impact tool with EverSharp 110 blade
- Parts: 1 year limited
- Model #: 10055110
- 428.05Dh –
- 367.27Dh Shipping
Quick View
Fluke Networks D814 Series 10054000 Impact Tool
- Specifications: Product Type:Punch Down Tool
- Parts: Lifetime
- Model #: 10054000
- 354.77Dh –
- 257.08Dh Shipping