Package Contents: 1 x Mounting All Screws Needed, 1x 4 Pin to Dual 15 Pin SATA Power Cable 2x SATA Data Cables( 18 inch),one is straight to straight, the order is straight to 90 degree
Specifications: Center Tip Polarity: Positive
Input Current: 0.8 A
Input Voltage: 100 ~ 240 AC
Output Current: 2 A
Output Voltage: 9 DC
Plug Type: M
Power Source: AC Adapter Included
Specifications: Center Tip Polarity: Positive
Input Current : 0.5 A
Input Voltage: 110 ~ 240 AC
Output Current: 3A
Output Voltage: 5 DC
Plug Type: N
Power Source: AC Adapter Included
Connector A: 1 - Mini-DisplayPort (20 pin) Male Output
Specifications: 15 ft. USB-C to DisplayPort Cable - 4K 60Hz
The USB-C to DisplayPort cable provides a solution to connect USB-C devices that support DisplayPort alternate mode (DP alt mode) to DisplayPort displays. The 6 feet length efficiently connects MacBooks, Chromebooks, and other USB-C devices that support DisplayPort Alternate Mode (DP Alt Mode) to displays without needing an additional DisplayPort cable.
4K / 60Hz Resolution
Support for resolutions up to 4K / 60Hz allow you to output onto 4K monitors to display Ultra HD resolutions up to 3840x2160 / 60Hz. Perfect for streaming HD content and playing Blu-ray media. The 6ft length also provides a longer length for use with a wide variety of setups. The DisplayPort male end also eliminates the ...
Specifications: This coupler links two fiber optic cables with LC connectors for duplex or simplex cable assemblies in a faceplate or keystone panel.
Dual LC/LC coupler for extending cables in a faceplate or keystone panel
High-precision mating structure with low insertion loss
Duplex adapter accepts two simplex connectors or one duplex connector
Works with 62.5/125 or 50/125 multimode fiber cables
Specifications: With a wide selection of snap-in modules, our flush-mount keystone wall plates will fulfill the most complicated station installation requirements. A variety of jacks and connectors will fill the wall plate openings. Since the inserts are a snap to install and remove, you can have a highly adaptable and professional-looking cabling system. Plus, we provide write-on designation labels with holders for easy identification among different systems or stations.
Compatible with NEMA standard openings and boxes, this wall plate will mount to any electrical or surface mount box, and work with any keystone jacks or keystone inserts.
Specifications: 4K Support: Yes
Bus Type: USB-C
Chipset ID:
Genesys Logic - GL3523
Realtek - RTL8153
Eton Technology - EJ899T
Parade Technologies - PS176
ITE -IT6516
Displays Supported: 1
Fast-Charge Port(s): No
Industry Standards:
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
USB 3.0 - Backward compatible with USB 2.0 and 1.1
Auto MDIX: Yes
Compatible Networks: 10/100/1000 Mbps
Full Duplex Support: Yes
Maximum Analog Resolutions: 1920 x 1200p @ 60Hz (VGA)
Maximum Data Transfer Rate:
5 Gbps (USB 3.0)
2 Gbps (Ethernet; Full-Duplex)
Maximum Digital Resolutions: 4096 x 2160p @ 24Hz or 3840 x 2160p @ 30Hz (HDMI)
Type and Rate: USB 3.0 - 5 Gbit/s
UASP Support: Yes
OS Compatibility:
Windows 7, 8, 8.1, 10
macOS 10.11 to 10.14
Chrome OS
Specifications: USB-C to DB9 adapter connects legacy serial devices, such as modems and digital cameras, to your computer or laptop’s USB-C port.
Provides full modem control and hardware/software flow control
Supports data transfer speeds up to 230 Kbps-double the speed of a PC serial port
Works with any USB-C cable up to 16 ft. long (detachable 3 ft. cable is included)
Plug-and-play operation allows you to set it up and begin using it immediately
Small enough to carry in a pocket or purse for fast file transfers anywhere
Specifications: Converter Type: Passive
Output Signal: DVI-D (DVI Digital)
Maximum Digital Resolutions: 1920 x 1200 / 1080p
System and Cable Requirements: DP++ port (DisplayPort ++) required on video card or video source (DVI and HDMI pass-through must be supported)
Specifications: Audio: Yes
Chipset ID: MCT - T6-688L
Memory: DDR 4Gb
Output Signal: DisplayPort
Audio Specifications: 2-channel stereo
General Specifications:
This USB video adapter uses a Trigger family chipset. If you’re connecting this device to a computer along with additional USB video adapters or docking stations, please avoid using devices with a DisplayLink or Fresco family chipset.
Maximum Digital Resolutions: 4K x 2K @ 30Hz
Supported Resolutions Widescreen(16/32 bit):
3840×2160, 2048x1152, 1920x1200, 1920x1080, 1680x1050, 1366x768, 1280x800, 1280x768, 1280x720
Standard(16/32 bit):
1600x1200, 1400x1050, 1280x1024, 1024x768, 800x600, 640X480
Wide Screen Supported: Yes
Connector(s)
Connector A: 1 - USB Type-A (9 pin) USB 3.0 Male Input
Connector B: 1 - DisplayPor...
Specifications: 4K Support: Yes
Bus Type: USB-C
Displays Supported: 1
Fast-Charge Port(s): No
Auto MDIX: Yes
Compatible Networks: 10/100/1000 Mbps
Full Duplex Support: Yes
Maximum Data Transfer Rate: 5 Gbps (USB 3.0) / 2 Gbps (Ethernet; Full-Duplex)
Maximum Digital Resolutions: 3840 x 2160p (HDMI)
Type and Rate USB: 3.0 - 5 Gbit/s
UASP Support: Yes
OS Compatibility: Windows 7, 8, 8.1, 10 / Mac OS 10.9 to 10.12 / Chrome OS
Power Source: USB-Powered
Output Connector: 1 x USB Type-C (24 pin) USB 3.0 Male
1 x HDMI (19 pin) Female
1 x RJ-45 Female
2 x USB Type-A (9 pin) USB 3.0 Female
1 x USB Type-C (24 pin) USB 3.0 Female
Specifications: With a wide selection of snap-in modules, our flush-mount keystone wall plates will fulfill the most complicated station installation requirements. A variety of jacks and connectors will fill the wall plate openings. Since the inserts are a snap to install and remove, you can have a highly adaptable and professional-looking cabling system. Plus, we provide write-on designation labels with holders for easy identification among different systems or stations.
Compatible with NEMA standard openings and boxes, this wall plate will mount to any electrical or surface mount box, and work with any keystone jacks or keystone inserts.