Specifications: Type: 5V 3pin ARGB LED strip LED strip length: 1.64ft LED numbers: 30 LEDs ARGB cable length: 1.64ft Installation: by double side adhesive
Specifications: Material 12 pcs addressable RGB LED with magnetic strip and adhesive tape
Pin definition:
+5V, D, G*
+5V, D, NP, G*
Included Parts:
2 x Addressable RGB LED strip
1 x Motherboard connect cable**
1 x Splitter cable
Length: 300mm
Wattage: 3W (5V, 0.6A)
Tandem limits: Depend on controller
Remark:
* Please check the control box and motherboard pin header that you want to connect are the same as LS03’s pin definition.
** Included Motherboard connect cable supports SilverStone’s addressable RGB 3pin connectors and other market standard addressable RGB 3pin (three pin in four pin housing) connectors.
Specifications: Material: 18 pcs 5050 RGB LED with magnetic strip and adhesive tape
Pin definition: +12V, G, R, B
Included Parts:
RGB LED strip x 2
Y cable x 2
Length: 300mm
Wattage: 1.44W (12V, 0.12A)
Tandem limits: 5 pcs on each line
Weight: 30g
Specifications: Material: Plastic fan grille and 28 pcs RGB LED Strip
Pin definition: +12V, G, R, B
Application: 140mm fan grille, LED kit
Rated Voltage: 12V DC
Rated Current: 0.56 A
Net weight: 45.00g
Dimension: 140.00 x 140.00 x 6mm
Specifications: Material: Plastic outer shell
Included Parts:
2 x SST-LS02 RGB LED strip
2 x Extend Y cable
1 x RGB 4pin signal cable
1 x 4pin peripheral cable
Signal input: a RGB 4pin host (+12V, G, R, B) or built-in IC control
Signal output: 8 x SilverStone custom RGB 4pin
Net weight: 1.06 oz.
Dimension: 0.75" x 1.81" x 3.35"
Specification: Pump Compatibility: DDC
Installation Compatibility: 120/140 mm fan/radiator
Seal O-Ring: DuPont VITON
Reservoir - ID: 126.72 /W: 1.78 (AS049)
Color: Transparent
RGB LED type: Digital-RGB (addressable)
LED Number: 5050, 18pcs
LED Electricity Spec: 5V/ 0.7A/ 3.5W
Capacity: 200ml
Materials: Acrylic body, Acrylic backplate, Steel bracket
Max Water Loop Temperature: 60 degree C
Fill Port: 1 x G 1/4
No. of Inlet: 3 x G 1/4
No. of Outlet: 1 x G 1/4
Package Contents: 1 x PH-R220C_02
3 x Stop Fitting G1/4 (Pre-installed)
1 x D-RGB LED Board (18 Pcs LEDs)
1 x D-RGB LED cable
1 x D-RGB LED motherboard adapter
1 x Reservoir Bracket (2x Pre-installed Rubber Pad)
2 x M4x10mm bracket screws
2 x M4x6mm LED strip screws
4 x M4 x25mm pump screws
4 x fan screws
1 x 3 mm Allen key
1 x User Manual
Specification: Pump Compatibility: D5 Pump (Gen3 D5 Pump pre-installed)
Installation Compatibility: 120/140 mm fan/radiator
Color: White
LED Type: Digital-RGB LED strip hard board (+5V, data, empty, Ground)
LED strip length: 74 mm
Number of LEDs: 7pcs
Input Voltage: +5V
Current Max: 0.21A
Wattage Max: 1.05W
Capacity: 210 ml
Materials: Acrylic
Aluminum cover
Fitting: Nickel Plated Brass
Fitting Insert: ABS
Fill Port 1 x G 1/4
No. of Inlet 2 x M24 x P1
No. of Outlet 2 x M24 x P1
Supported tube size Hard Tube: OD 16mm
Soft Tube: OD 16mm; ID 10mm
Tube Compatibility Hard Tube: PETG, Acrylic tube
Soft Tube: PVC tube
Specifications: Lighting Node PRO
Power input: 4.5V to 5.5V
Unit dimension: 55mm x 31mm x 12mm
RGB LED channels: 2
Max. RGB LED strip per channel: 4
Mini USB cable: 375mm
SATA Power cable: 440mm
HD RGB LED hub cable 485mm
Individually Addressable RGB LED strip
Length: 410mm
RGB LED chip count: 10
Protective cover: IP65-rated transparent silicone
Adhesion type: 4 magnets per strip and full-strip tape
RGB extension cable: 345mm