Your Browsing History
HKD$502.99
VAT-Inclusive Price
Most customers receive within 5-9 days.
Meet Your Seller
ODESC V4.2 Brushless Servo Motor Controller Driver Board, Software Configuration Compatible with Odrivetool, FOC, BLDC
- ODESC V4.2 single driver board, STM32F405RGT6 Microprocessor.
- Working voltage:DC 8V-56V, Continuous current: 70A, Peak current: 120A.
- Braking methods: Power resistors & battery recycling
- Drive motor: Brushless DC motor (BLDC)
- Control modes: speed mode, position mode, current mode, torque mode for trajectory planning.
+
+
Overview
Specs
Reviews
Specification
- Hardware Version: Newest Version
- Microprocessor: STM32F405RGT6
- Dimension: 63*58*30mm / 2.5*2.3*1.2 inches
- Supported motor type: brushless motor
- Continuous current: 70A (depending on heat dissipation)
- Peak current: 120A/motor
- Input Voltage: 8V-56V
- Supported encoders: incremental encoder (AB, ABI), absolute value encoder (SPI), Hall sensor (HALL), AMT102, AMT103, TLB5012, AS5047P, etc.
- Communication interface: USB-protocol open source (computer, for Raspberry Pi, ROS), Step/direction (PLC), UART (embedded device), PWM (RC remote control), GPIO, analog input, and CAN, ASCII, etc.
- Motion mode: position mode, speed mode, torque mode for trajectory planning, etc.
- Braking/braking mode: braking resistor, regenerative braking
- PCB integrated high-current open skylight design, and CN custom-made aluminum metal heat sink, which greatly improves operation stability.
- Programmable: Yes
- Power Cable: 12AWG
Application
- Fit CNC milling machines, 3D printers, robots, AGV cars, pan tilt slides, etc.
Packing List
- 1 x driver board
- 1 x Type-C Data Cable
- 1 x 50W 2 Power Resistor
- 2 x 12AWG Power Cable
- 1 x SH1.0mm 2P Single End Connecting Wire
- 1 x SH1.0mm 5P Single End Connecting Wire
- 1 x SH1.0mm 6P Single End Connecting Wire
- 1 x SH1.0mm 5P Double End with Same Direction
- 1 x SH1.0mm 6P Double End with Same Direction
- Hardware Version: Newest Version
- Microprocessor: STM32F405RGT6
- Dimension: 63*58*30mm / 2.5*2.3*1.2 inches
- Supported motor type: brushless motor
- Continuous current: 70A (depending on heat dissipation)
- Peak current: 120A/motor
- Input Voltage: 8V-56V
- Supported encoders: incremental encoder (AB, ABI), absolute value encoder (SPI), Hall sensor (HALL), AMT102, AMT103, TLB5012, AS5047P, etc.
- Communication interface: USB-protocol open source (computer, for Raspberry Pi, ROS), Step/direction (PLC), UART (embedded device), PWM (RC remote control), GPIO, analog input, and CAN, ASCII, etc.
- Motion mode: position mode, speed mode, torque mode for trajectory planning, etc.
- Braking/braking mode: braking resistor, regenerative braking
- PCB integrated high-current open skylight design, and CN custom-made aluminum metal heat sink, which greatly improves operation stability.
- Programmable: Yes
- Power Cable: 12AWG
Application
- Fit CNC milling machines, 3D printers, robots, AGV cars, pan tilt slides, etc.
Packing List
- 1 x driver board
- 1 x Type-C Data Cable
- 1 x 50W 2 Power Resistor
- 2 x 12AWG Power Cable
- 1 x SH1.0mm 2P Single End Connecting Wire
- 1 x SH1.0mm 5P Single End Connecting Wire
- 1 x SH1.0mm 6P Single End Connecting Wire
- 1 x SH1.0mm 5P Double End with Same Direction
- 1 x SH1.0mm 6P Double End with Same Direction
Warranty & Returns
Warranty, Returns, And Additional Information
Return Policies*
- Return for refund within: 30 days
- This item is covered by New Ocean Tech Return Policy
- *Subject to applicable law
Warranty Notice:
This product does not include manufacturer warranty when purchased or used outside of its designated sales region. By purchasing internationally, you acknowledge that warranty support from the manufacturer will not be available.
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...