Your Browsing History
HKD$713.37
VAT-Inclusive Price
Most customers receive within 7-9 days.
Sold by Jiamayanonly
Shipped by Jiamayanonly
Meet Your Seller
DIYmalls 915MHz LoRa ESP32 OLED Board V3 Type-C SX1262 8MB Flash + LoRa Antenna U.FL IPEX to SMA for Arduino LoraWan IOT (Pack of 2), not Compatible with LoRa 32 V2
- -You will receive, 2pcs 915MHz esp32 lora V3, 2pcs 915mhz lora antenna,and 2pcs 2pin 1.25mm connector.
- -The newly LoRa V3 version has the same pin sequence and function as the V2 version. But the V3 change micro USB port to be type C.
- -LoRa board 915mhz comes unassembled, soldering required by you, not equipped with lithium battery.
- -You can power 915 lora board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, type C 5V power is recommended.
- -If you want to use the lora 32 v3 board with case, please buy another smaller 915 lora antenna because this lora 915 antenna is bigger than the lora case.
+
+
Overview
Specs
Reviews
915
ESP32 LoRa OLED: Main chip: espressif esp32 and SX1276
Operating voltage: 3.3V to 7V
Flash: 32M-Bits
Main Frequency: 240MHz
Support frequency: 915MHz
Lora chip: SX1276
Distance: about 2.8KM in open place
Computing power: 600DMIPS
Dual-mode Bluetooth: traditional Bluetooth and BLE low-power Bluetooth
Development environment: support arduino
USB adapter chip: cp2102
Operating temperature range: -40 deg C to + 90 deg C
Support modes: Sniffer, Station, softAP and Wi-Fi Direct
Data rate: 150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b
Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
Receiver sensitivity up to - 98 dBm
UDP continues to throughput by 135 Mbps
915 LoRa Antenna: Connector type: ipex
Band definition: 915MHz
Standing wave ratio: < = 1.5
Gain: 2dBi
Maximum power: 10W
Input impedance: 50O
1.25 mm-2P Connector: Length: 150mm
Wire specifications: # 28
Core: 7 shares 0.11 mm tin-plated copper
Outer diameter: 0.9 mm
Tail tin: 2mm
Package Includes: 2 X ESP32 Lora OLED board
4 X Pin header
4 X Pin header stickers
2 X U. FL IPEX to SMA Connector Antenna
2 X 1.25 mm-2P Connector
ESP32 LoRa OLED: Main chip: espressif esp32 and SX1276
Operating voltage: 3.3V to 7V
Flash: 32M-Bits
Main Frequency: 240MHz
Support frequency: 915MHz
Lora chip: SX1276
Distance: about 2.8KM in open place
Computing power: 600DMIPS
Dual-mode Bluetooth: traditional Bluetooth and BLE low-power Bluetooth
Development environment: support arduino
USB adapter chip: cp2102
Operating temperature range: -40 deg C to + 90 deg C
Support modes: Sniffer, Station, softAP and Wi-Fi Direct
Data rate: 150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b
Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
Receiver sensitivity up to - 98 dBm
UDP continues to throughput by 135 Mbps
915 LoRa Antenna: Connector type: ipex
Band definition: 915MHz
Standing wave ratio: < = 1.5
Gain: 2dBi
Maximum power: 10W
Input impedance: 50O
1.25 mm-2P Connector: Length: 150mm
Wire specifications: # 28
Core: 7 shares 0.11 mm tin-plated copper
Outer diameter: 0.9 mm
Tail tin: 2mm
Package Includes: 2 X ESP32 Lora OLED board
4 X Pin header
4 X Pin header stickers
2 X U. FL IPEX to SMA Connector Antenna
2 X 1.25 mm-2P Connector
Warranty & Returns
Warranty, Returns, And Additional Information
Return Policies*
- This item is covered by Jiamayanonly Return Policy
- *Subject to applicable law
Warranty Notice:
This product does not include manufacturer warranty when purchased or used outside of its designated sales region. By purchasing internationally, you acknowledge that warranty support from the manufacturer will not be available.
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...