Question 1

I have 20 mbps coming in will it support this without lowering my speed?

Accepted Answer

This has a Gigabit transfer rate which means 1000mbps.... in saying that this switch will be fine for all your needs.

As far as supporting it without a doubt, The older switches only use 10/100 mbps but this one is 10/100/1000. You'll have this for years to come.

Hope this helped

Question 2

running a Arris Time Warner mondum Tm502G. using a router with 4 plug ins 1 for the mondum and 3 cp's. now with an xbox I need 1 more. is this switch what I need?

Accepted Answer

Yes

Question 3

I want to use this to connect multiple Macs running OS X Yosemite. Will I have a problem in an all Mac environment?

Accepted Answer

No. Switches are not effected by different operating systems, and will work fine with Macs or Windows PC's.

Question 4

Can i know the switch come with European or US AC-DC adaptor?

Accepted Answer

It comes with a US adapter, fortunately I know newegg has some descent adapters for low price, my sister used one in france for a while, never died.

Question 5

What is the maximum length of RJ-45 cabling this switch can reliably produce a signal for? I'm looking for a switch that can handle 3-5 network cables running between 100 and 300 ft.

Accepted Answer

Cable lengths when dealing with Ethernet are not device dependent. You should always use the standards for making these determinations.

1000BASE-T (also known as IEEE 802.3ab) is a standard for gigabit Ethernet over copper wiring. Each 1000BASE-T network segment can be a maximum length of 100 meters (328 feet), and must use Category 5 cable or better (including Cat 5e and Cat 6).

This also applies for 10Base-T (10mbit) and 100Base-T (100mbit) connections.

Basically, it is never recommended to have a copper network cable run more than 328 feet without a powered device, such as a repeater, hub or switch inline.

Question 6

Will the Netgear switch work with an AT&T Uverse router?

Accepted Answer

It doesn't matter what switch you use with what router.  Ethernet is Ethernet.

Question 7

I cannot connect my smart tv to netfix.  Vizio repair man said it was my wifi modem with Comcast.  He hooked up a router and it worked fine.  is this the kind of router I need?

Accepted Answer

This is a network switch not a router but you can plug your TV into this and then connect this to your Comcast modem but you could also just run a long cable from your TV to your Comcast modem. The purpose of a switch is to give you more network ports.

Question 8

Can I connect this switch to my existing 24 port NetGear Gigabit switch to get four more drops in a different room?

Accepted Answer

Rick, yes you can. This is an unmanaged switch.  It will pick up the IP address assignments from your router.  I have four of these in my house servicing two TV rooms and 2 computer work areas.  They connect to a Netgear 24 port switch which is connected to a Netgear router.  They work great.  Don't forget to register it with Netgear for the lifetime warranty which they honor without hassle. BZ

Question 9

can i used this at home with my hp all in one  desktop? netgear 5 port gigabit

Accepted Answer

As long as your HP has an Ethernet port on it somewhere (usually in the back) you can.  This is an excellent switch for splitting your internet between several pieces of equipment like a computer, a printer, VOIP phone, bluray player, etc.  Typically, you'll plug a cable from your DSL/Cable modem into plug #5 on the Netgear switch then run a cable from your computer into plugs 1,2, 3 or 4.  It's an unmanaged switch so there's no set up.  It should work as soon as you make the connections.

Question 10

I have a Mac OS X Yosemite as the OS for 3 macs. Is this Mac compatible?

Accepted Answer

Yes, networking is OS agnostic. you just have to have a modern OS on a computer with an Ethernet port. you'll also need a router to assign IP addresses. This is only a switch that allows multiple devices/computers to share the same port on the router.

Brand	NETGEAR
Series	ProSafe
Model	GS105 v5

Standards	IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3z 1000BASE-T Gigabit Ethernet
Network Management Type	Unmanaged

Primary Ports	5 x RJ45
Primary Port Speed	10/100/1000Mbps

MAC Address Table	2K
Switching Method	Store and Forward
Buffer Memory	128KB

Protocols	TCP/IP
PoE	No
Stackable	No
SNMP	No
QoS	No
LACP	No
Layer	2
Port Mirroring	No
Module Support	No
LEDs	Per port: Speed, Link, Activity Per device: Power Status

NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch | GS105NA

Learn more about the Netgear Inc. GS105 v5

Customer Reviews of the Netgear Inc. GS105 v5

Warranty & Returns

Warranty, Returns, And Additional Information

Return Policies*

Manufacturer Contact Info

Temperature	0°C to 50°C (32°F to 122°F)
Humidity	90% Maximum, Non-condensing

Dimensions & Weight
Dimensions	1.02" x 3.97" x 3.70"
Weight	0.56 lb.

Item#: N82E16833122128