Specifications: Drive Connectors 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors 1 - USB 3.1 USB Type-A (9 pin; Gen 2; 10 Gbps) Male
Bus Type: USB 3.1 Gen 2
Chipset ID: ASMedia - ASM1351
Compatible Drive Types (Type and Rate): SATA
Drive Size: 2.5in
Interface: USB 3.1 Gen 2
Number of 2.5 inch bays: 1
Number of Drives: 1
Hot Swap Capability: Yes
Max Drive Capacity: Currently tested with hard drives up to 2TB at 7200 RPM
Maximum Data Transfer Rate : 10 Gbps
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s
UASP Support: Yes
Specifications: With a wide selection of snap-in modules, our flush-mount keystone wall plates will fulfill the most complicated station installation requirements. A variety of jacks and connectors will fill the wall plate openings. Since the inserts are a snap to install and remove, you can have a highly adaptable and professional-looking cabling system. Plus, we provide write-on designation labels with holders for easy identification among different systems or stations.
Compatible with NEMA standard openings and boxes, this wall plate will mount to any electrical or surface mount box, and work with any keystone jacks or keystone inserts.
Specifications: Converter Type: Passive
Output Signal: DVI-D (DVI Digital)
Maximum Digital Resolutions: 1920 x 1200 / 1080p
System and Cable Requirements: DP++ port (DisplayPort ++) required on video card or video source (DVI and HDMI pass-through must be supported)
Specifications: Connector A: 1 - DVI-I (29 pin) Female
Connector B: 1 - VGA (15 pin; High Density D-Sub) Male
Color: Beige
Connector Plating: Nickel
Connect a DVI-I Display to a VGA video card
Specifications: Center Tip Polarity: Positive
Input Current: 0.8 A
Input Voltage: 100 ~ 240 AC
Output Current: 2 A
Output Voltage: 9 DC
Plug Type: M
Power Source: AC Adapter Included
Specifications: USB-C to DVI cable connects your DVI display to the USB-C or Thunderbolt 3 port on your laptop, MacBook or Chromebook.
Transmits video signals from sources supporting USB DisplayPort Alt Mode
Delivers HD picture quality at resolutions up to 1920 x 1080 (1080p) @ 60 Hz
Supports USB 3.1 Gen 1 speeds up to 5 Gbps to ensure fast data transfers
Reversible USB-C plug connects in either direction for immediate no-fuss use
Easy installation with plug-and-play operation-no software required
Connector:
Side A - Connector 1: USB-C (MALE)
Side B - Connector 1: DVI-D DUAL-LINK (FEMALE) (WIRED TO DVI-D SINGLE-LINK)
Specifications: Long-Distance Data Transfer to 4 Devices - Up to 164 ft. (50 m) from the Source
Send data to as many as four USB 2.0 devices located up to 164 ft. from the source
USB signals travel over a single user-supplied Cat5/Cat6 cable
Includes transmitter with built-in USB-A cable and 4-port receiver hub
Supports data transfer rates up to 480 Mbps
Greater Distance over Cat5/Cat6 Cable Provides Greater Flexibility
Cat5/Cat6 cabling exceeds the 16 ft. distance limitation of USB cables
Allows connection to devices that lack network connectivity in areas beyond the reach of standard USB cables
Makes connections in areas without network availability
Allows source to be in a secure location, separate from peripherals
Cat5/Cat6 cabling is cost-effective and readily avai...
Specifications: Female USB-C to male USB-A connects your smartphone, tablet or Ultrabook to your laptop or computer.
Data transfer speeds up to 5 Gbps - 10 times faster than USB 2.0
Supports power output up to 900mA
Reversible USB-C port provides fumble-free connection
Gold-plated contacts for maximum conductivity and minimum data loss
Backward compatible with previous USB generations