Specifications: Converts Serial ATA to Parallel ATA
Supports ATA 100/133
Fit for 3.5/2.5 SATA HDD DVD.
One 40pin IDE port.
One Serial ATA port.
One 4pin power connector.
Chipset : JM20330
Features: SATA to IDE Adapter ("Convert SATA Hard Drive to IDE Hard Drive")
Connect a SATA hard drive to you IDE motherboard with this SATA to IDE Adapter
Turn your SATA hard drive into IDE interface hard drive
Features the JMicro JM20330 chipset
Compliant with SATA specification and supports up to 2TB hard drives
Specifications: Center Tip Polarity: Positive
Input Current: 0.8 A
Input Voltage: 100 ~ 240 AC
Output Current: 3 A
Output Voltage: 5 DC
Plug Type: M
Power Source: AC Adapter Included
Specifications: Audio: Yes
Chipset ID: NXP - PTN5100 / Pericom - PI3DPX1203
Converter Type: Format Converter
Audio Specifications: 7.1 surround sound
Maximum Digital Resolutions: 4K (3840 x 2160) @ 60 Hz
Supported Resolutions:
1024 x 768
1280 x 720
1920 x 1080 @ 144hz
1920 x 1200
2560 x 1440
2560 x 1600
3840 x 2160 @ 60Hz
Video Revision: DisplayPort 1.2
Wide Screen Supported: Yes
Connector:
1 x USB-C (24 pin) DisplayPort Alt Mode Male Input
1 x Mini-DisplayPort (20 pin) Female Output
System and Cable Requirements:
Your USB-C device must support DisplayPort over USB-C (DP alt mode) to work with this adapter
This adapter outputs a single-mode Mini DisplayPort signal and will not work with additional video adapters such as Mini DisplayPort to HDMI, Mini DisplayPor...
Specifications: Maximum Resolution: 3840 x 2160
Host Interface: USB 3.0
DisplayPort: Yes
Number of DisplayPort Outputs: 1
System Requirements: Operating System(s):
Windows 8/8.1 (32/64bit)
Windows 7 (32/64bit)
Windows Vista (32/64)
Windows XP (32/64)
Windows 2000 (Aero 3D interface supported)
Specifications: Operating Temperature Range: 32 to 113 F (0 to 45 C)
Storage Temperature Range: 14 to 158 F (-10 to 70 C)
Power Consumption (Watts): 60W (20V/3A)
Operating Humidity Range: 10% to 85% RH, NON-CONDENSING
Storage Humidity Range: 5% to 90% RH, NON-CONDENSING
Max Supported Video Resolution: 3840 X 2160 (4KX2K) @60HZ
Displayport Specification: 1.2
HDCP Specification: 1.3
USB Specification: USB 3.1 Gen 1 (up to 5 Gbps)
Specifications: Host Interface: USB 3.0 Male Type-A Connector
Video Interface: 2 x HDMI Female Connector (HDMI Audio output simultaneously)
Max Resolution: 3840 x 2160 @ 30 Hz; 2048 x 1152 @ 60 Hz
Power Mode: Bus-powered
Power Consumption: = 400mA
Housing Material: Aluminum
Specifications: 2.5in & 3.5in
Drive Connectors 1 - SATA (7 pin; Data) Receptacle
Host Connectors 1 - mSATA (52 pin; Mini SATA) Male
Max Drive Capacity Currently tested with up to 4TB 7200 RPM hard drive
Type and Rate SATA III (6 Gbps)
Specifications: Center Tip Polarity: Positive
Input Current: 0.8 A
Input Voltage: 100 ~ 240 AC
Output Current: 2 A
Output Voltage: 9 DC
Plug Type: M
Power Source: AC Adapter Included
Specifications: Converter Type: Passive
Output Signal: DVI-D (DVI Digital)
Maximum Digital Resolutions: 1920 x 1200 / 1080p
System and Cable Requirements: DP++ port (DisplayPort ++) required on video card or video source (DVI and HDMI pass-through must be supported)
Specifications: Bus Type: USB 2.0
Chipset ID: FTDI - FT232RL
Interface : Serial
Port Style: External Hub
Ports: 16
Data Bits: 7, 8
FIFO: 256 Bytes
Max Baud Rate: 921.6 Kbps
Maximum Data Transfer Rate: 480 Mbps
Parity: Odd, Even, Mark, Space, None
Serial Protocol: RS-232
Stop Bits: 1, 2
LED Indicators 16 - Data Receive
16 - Data Transmit
Center Tip Polarity: Positive
Input Current: 1.5 A
Input Voltage: 100 ~ 240 AC
Output Current: 3 A
Output Voltage: 12 DC
Plug Type: N
Power Consumption: 36 W Max.
Power Source: AC Adapter Included
Humidity: 20~80% RH (Non-condensing)
Operating Temperature: -40°C to 85°C (-40°F to 185°F)
Storage Temperature: -65°C to 150°C (-85°F to 302°F)
Enclosure Type: Steel
Specifications: 4K Support: Yes
Audio: Yes
Bus Type: USB-C
Chipset ID: VLI - VL812 (USB 3.0 Hub), VLI - VL100 (USB Power Delivery), PS - PS171 (DVI), Realtek - RTL8153 (LAN)
Displays Supported: 1
Fast-Charge Port(s): No
Industry Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab; USB 3.0 - Backward compatible with USB 2.0 and 1.1
Auto MDIX: Yes
Compatible Networks: 10/100/1000 Mbps
Full Duplex Support: Yes
Maximum Data Transfer Rate: 5 Gbps (USB 3.0); 2 Gbps (Ethernet; Full-Duplex)
Maximum Digital Resolutions: 1920 x 1200 - 60 Hz (DVI)
Maximum Power Delivery Support: 60W
Output Signal: DVI-D (DVI Digital)
Type and Rate: USB 3.0 - 5 Gbit/s
UASP Support: Yes
Connector Type(s): 1 x USB Type-C (24 pin) USB 3.0 Male
OS Compatibility: Windows 7, 8.1, 10 / Mac OS 10.11 to 10.12 / Chrome OS
Note:
Not all...
Specifications: Analog Video Compliant: VESA
Input: DisplayPort Male
Output: VGA Female
Bandwidth: Triple 10-bit, 162 MHz Video DAC for VGA
Video Resolution: Supports video resolutions up to 1920x1200 / 1080P (Full HD)
EDID: Pass-through, Automatic sink detection
Driver: Plug and Play, No Software to Install Power by: DisplayPort source
Specifications: The USB-C to Ethernet Adapter is an ideal solution for wired network connectivity and data transfer on the go, in the office, or any work space. This adapter connects to a USB-C or Thunderbolt 3 enabled laptop, tablet, or desktop computer and features an Ethernet port.
The small form factor of this adapter makes it a portable and convenient solution that provides a Gigabit Ethernet port for a wired internet connection. The adapter is perfect for connecting to networks where Wi-Fi is unavailable or for computers that do not provide a wired Ethernet port or possibly have a damaged Ethernet port.
The Ethernet port allows for reliable internet connectivity and file transfer speeds up to 1000Mbps.
Specifications: Connector A: 1 - DVI-I (29 pin) Female
Connector B: 1 - VGA (15 pin; High Density D-Sub) Male
Color: Beige
Connector Plating: Nickel
Connect a DVI-I Display to a VGA video card