Specifications: Size: 45mm x 33mm x 15mm( with adhesive) Fan Speed controller High position for 12V out put Low position for 7V output Off position for fans shut down Support total 8 fans 12V/2A max.
Specifications: Use this adapter couple two RJ-45 ethernet cables together, Great for extending ethernet connection Future-proof your network for 10-Gigabit ethernet connectivity Shielded housing and easy snap-in retaining clip ensure a secure and corrosion free connection RJ45 inline jack coupler comply with the TIA/EIA 568-C.2 standard This 8P8C female to female ethernet coupler jack is compatible with Cat 8 Cat7 Cat6 Cat5e network
Specifications: Mini SAS 36 pin SFF-8087 to 4 x SFF-8082 cable, SFF-8482 side with the 15 pin power, Internal miniSAS SFF-8087 to (4) SFF-8482 connectors with SATA power power. This cable allow you to connect from a SAS controller with SFF-8087 internal miniSAS connector to four (4) SAS hard drives, Length is 0.5 Meter. Compatible with the following IBM controller as well as others non-IBM controllers: ServeRAID-MR10i, ServeRAID-MR10il, ServeRAID-MR10is, ServeRAID-BR10i, ServeRAID-BR10il, ServeRAID-BR10il v2, ServeRAID-M1015, Package Includes: 1 x 0.5M Internal SAS 36Pin SFF-8087 to 4 x 29Pin SAS (SFF-8482) Cable
Specifications: Extend the rare RGB interface on your motherboard to ten. Allow you to Control up to 10 channels RGB fans and lightning synchronously 12V AURA RGB Lighting Hub w/ 3M Self-Stick for PC case internal installation 1FT female to female RGB extension cable include Notes: 1. Generally, RGB interface in motherboard can provide at least 12V/1A(12W) power to periphery RGB device. The RGB hub no extra power suplly capacity. 2. Suggest to connect RGB lightning less than 3.3ft 3. If Connected RGB devices are dimmed out, means motherboard RGB interface is overlaod, please reduce connected RGB devices 4.Make sure arrow mark on the plug corresponds to RGB 12V on bother motherboard and hub
Specifications: Internal USB 2.0 9pin 1 to 2 ports Hub Duplicate motherboard USB 2.0 header to two Convert motherboard USB 2.0 Male to 2 Male 1ft USB 2.0 internal cable for motherboard and hub connecting Self-Stick for easy installation
Specifications: Data Rate(s) Supported: 10M,100M,1Gbps(1000 Mbps). Single-Lane (x1) PCI-Express with transfer rate 2.5Gb/s Full Duplex channel Compliant with PCI Express Revision 1.0a. PCI Express x1 interface, compatible with PCI Express x1, x4, x8, x16 slots. Supports Full Duplex flow control (IEEE 802.3x). Fully compliant with IEEE802.3, 802.3ab, 802.3u, 802.3x, 802.1q, VLAN. Supports IEEE 802.1P Layer 2 Priority Encoding Plug and Play Support. OS supported: designed for Windows 98SE, Windows ME, Windows 2000, XP, Vista, Windows 7 /8 / 10, Mac, Linux/Unix and others.
Specifications: Interface: USB2.0 to 2.5 inch SATA SSD/HDD
Data transfer rate: 480Mb/s
Suitability:2.5" SATA HDD
Power Supply: Host USB port;
Built in TWO LED indicator light for Power and Data transfer: Power (Red), Access (Blue).
Requirements: Desktop/laptop PC with available USB 2.0 port. Windows 98SE/ME/2000/XP/Vista/MAC. When lack of power, plug the additional USB connector upto the omputer.
Specifications: Full-featured USB 3.1 type C Male to USB type C Female connection cable Connector 1: 90 Degree angle USB type C male plug Connector 2: USB Type C Female Plug Cable Color: Black Cable Length is 1 meter Approximately/ 3.3 Foot Data transfer speed up 10Gbp/s Charging current up to 3A Easy carrying mostly for new smart phone has USB-C Port Note: Does not support Apple or Dell Multi-Media Adapter Hub or Dock.
Specifications: Comb power button & reset button on Power supply and HDD working status LED indicators w/ PMMA case for switch protection Covered self-adhesive in bottom for easy installation 2FT in cable length