Specifications: Average Particle Size:
< 0.49 micron < 0.000020 inch
Extended Temperature Limits:
Peak: -50 Celsius Degree to >180 Celsius Degree
Long-Term: -50 Celsius Degree to 130 Celsius Degree
Performance:
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area:
A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches.
Specifications: CORSAIR TM30 thermal paste helps you push your PC to its limit, with a low-viscosity premium zinc oxide thermal material that’s easy to apply. TM30’s ultra-low thermal impedance ensures high-efficiency heat transfer between your hardware and cooler, lowering temperatures and allowing for higher clock speeds.
Net Weight: 3g
Thermal Conductivity: 3.8 W/mK
Thermal Impedance: 0.01°C -in2/W
Viscosity: 2300K cPs
Specific Gravity: 2.5g/cm3
Specifications: Thermal Conductivity (W/mk): 8.5
Viscosity (poise): 870
Density (g/cm3): 2.5
Net Weight: 4g
The ARCTIC MX-4 is a premium-grade thermal paste with exceptional performance and ease of application. It is an electrically non-conductive paste that is applied between CPU / GPU and designated coolers to transfer the dissipated heat from the components to the heat sink. Since the ARCTIC MX-4 is a metal-free compound, it eliminates the risks of causing short circuit and in turn adding more protection to your computer. The new formula in the ARCTIC MX-4 features optimal thermal conductivity and low thermal resistance. These characteristics effectively dissipate the emitted heat from the core components. The consistency of the ARCTIC MX-4 is designed for simple application. Its text...
Specifications: Applications: CPU / GPU Thermal Thermal Conductivity: 73 Wm / K Specific gravity: 6.24g/cm³ Viscosity: 00021 pas Operating temperature: 10 °C /140°C Content: 5g
Specifications: Average Particle Size:
<0.49 micron <0.000020 inch
Extended Temperature Limits:
Peak: -50 Degrees C to >180 Degrees C
Long-Term: -50 Degrees C to 130 Degrees C
Performance:
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area:
A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches.
Long Term Operating Temperature: -250 °C / +150 °C
Specifications: The Thermal Grizzly Carbonaut pad is a carbon fiber thermal pad. Its special developed polymer results in its flexibility and its soft 'gap filler' properties. The carbon fiber structure ensures excellent thermal conductivity. Thermal Grizzly Carbonaut is lightweight and reusable. In addition, Thermal Grizzly Carbonaut has a very high thermal conductivity even with very little contact pressure. Thermal Grizzly Carbonaut heat transfer performance always remains constant. Note: Carbonaut is electrically conductive.
Carbonaut is available pre-assembled in many standard CPU / GPU sizes.
Size - CPU/GPU
32 x 32 - Intel Desktop CPUs (115x) e.g 6700K, 7700K, 9900K
38 x 38 - Intel 20xx HEDT CPUs and AMD Desktop CPUs. e.g. 7900X, 7980XE, 2700X, 1800X, 6950X
51 x...
Specifications: Material Specification:
Al 70~88(wt%)
ZnO 18~34(wt%)
Oil 8~12(wt%)
Antioxidant 0.5~2(wt%)
Adhesiveness: 330000Cps
Thermal Conductivity: 11.2 W/m - Degree C
Thermal Impedance (Resistance): 0.013 Degree C-in2/W
Included: One syringe of thermal compound and one easy-to-spread card.
Specific Gravity: 2.7g/cm3
Specifications: Kryonaut uses a special structure, which halts the drying out process at temperatures of up to 80° Celsius. This structure is also responsible for the nano-aluminum- and zinc-oxide-parts included in the grease to compound optimally, to compensate for unevenness of the component (i.e. the CPU) or the heat sink, thus guaranteeing remarkable heat transfer.
Specifications: Material Specification:
Al 70~88(wt%)
ZnO 18~34(wt%)
Oil 8~12(wt%)
Antioxidant 0.5~2(wt%)
Adhesiveness: 330000Cps
Thermal Conductivity: 11.2 W/m - Degree C
Thermal Impedance (Resistance): 0.013 Degree C-in2/W
Included: One syringe of thermal compound and one easy-to-spread spoon
Specific Gravity: 2.7g/cm3
Specifications: Thermal Conductivity (W/mk): 8.5
Viscosity (poise): 870
Density (g/cm3): 2.5
Net Weight: 4g
The ARCTIC MX-4 is a premium-grade thermal paste with exceptional performance and ease of application. It is an electrically non-conductive paste that is applied between CPU / GPU and designated coolers to transfer the dissipated heat from the components to the heat sink. Since the ARCTIC MX-4 is a metal-free compound, it eliminates the risks of causing short circuit and in turn adding more protection to your computer.
The new formula in the ARCTIC MX-4 features optimal thermal conductivity and low thermal resistance. These characteristics effectively dissipate the emitted heat from the core components.
The consistency of the ARCTIC MX-4 is designed for simple application. Its texture is just thin enough to spread onto components using fingers witho...
Specifications: Average Particle Size:
<0.36 micron <0.000014 inch (70 particles lined up in a row equal 1/1000th of an inch.)
Temperature Limits:
Peak: -150 Degrees C to >185 Degrees C
Long-Term: -150 Degrees C to 130 Degrees C
Coverage Area:
2.7-gram syringe. (Approximately 1cc)
At a layer 0.003" thick, one syringe will cover about 22 square inches.
25-gram syringe. (Approximately 9.2cc)
At a layer 0.003" thick, one syringe will cover about 200 square inches.