Specifications: Pro3000 Analog Toner Specifications
User interface:
Slide switch selects Continuity or Tone Mode
Push button switch selects SOLID, ALT or OFF
Tone mode LED
Continuity/Polarity LED
Solid Frequency:
1000 Hz nominal
Alternating Frequency:
1000/1500 Hz nominal
Over Voltage Protection:
60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode:
8 dbm into 600 ohms
Output Voltage Level in Continuity Mode:
8 Vdc with fresh battery
Battery:
9V alkaline
Temperature:
Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case dimensions:
2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)
The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally bei...
Specifications: Test Services:
Fault Display
High Speed Testing
Generation of two tones for tracing cables and locating hidden cables
Length Measurement:
15.75" to 656 ft Twisted Pair
Ports: 1 x RJ-45
Status Indicators:
5 green LEDs for pairs and shield display
6 red LEDs (TONER, SHORT, REVERSED, MISWIRE, SPLIT PAIRS, and LOW BATTERY)
Batteries: Alkaline AAA
Features
Features
Auto-sleep mode
Generation of two tones for tracing cables and lication hidden cables
Packaging
Package Contents
MicroMapper MT-8200-49A Network Testing Device
MicroMapper Remote
Patch Cable
6-Volt Alkaline Battery
User Guide
The MicroMapper quickly and easily tests twisted pair cabling, giving you visibility of opens, shorts, crossed, reversed and split pairs. Just push the TEST button and MicroMapper will automatically scan all wire pairs for any existing faults...
Specifications: ATX PSU each output connectors check
Tests 20-pin and 24-pin power supplies
Tests SATA power
Tests Pentium 4 power connector
Tests PCI-Express power connectors
Tests Xeon power connectors
Tests Floppy drive connectors
Tests standard 4-pin power supply connectors
Accurate voltage indicator +/-V(+12V1/+5V/+3.3V/5VSB/+12V2/ -12V)
ATX P.G value display.
Lower or higher P.G values alarm
Lower voltage detected alarm.
Over voltage alarm.
No voltage detected alarm.
Dimension : 2.52" x 5.91" x 0.71"
Specifications: Test Services:
Graphical wiremap, length, cable ID, and distance to fault displayed on one screen.
Tests all common media types including RJ11, RJ45, Coax, with no need for adapters.
Locates virtually any cable or wire pair with IntelliTone digital and analog toning.
Verifies today's media services, including 10/100/1000 Ethernet, POTS, and PoE.
Integrated rubber holster enhances grip and makes it durable enough for the toughest jobs.
Large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet.
Length Measurement: 11.81" to 1509 ft
Ports: RJ-45 10/100/1000Base-T Network
Connectivity Media: UTP
Display Screen: Monochrome LCD with backlight
Batteries: AA Standard
Dimensions: 3.00" x 6.40" x 1.40"
Weight (Approximate): 12.80 oz
Specifications: Test for:
Tests 20-pin and 24-pin power supplies
Tests SATA power
Tests Pentium 4 power connector
Tests PCI-Express power connectors
Tests Xeon power connectors
Tests Floppy drive connectors
Tests standard 4-pin power supply connectors
Tests for +3.3V, -12V, PG, +5VSB, +12V, -5V, +5V outputs
Note:
The -5V DC output is took off from Intel ATX12V design guide since the 1.2 version.
1. The -5V usage was for last generation ISA slot. But the old ISA had been phased out since 1993~1994.
2. Neither P3 nor P4 systems will need -5V output.
Specifications: Our most economical do-everything toolkit. The Essential Electronics Toolkit is what you need for the most essential electronics repairs—like screen and battery swaps—and everything you need for most household DIY fixes. Get started in electronics repair with all the bits and precision tools to handle your most urgent screen breaks and battery swaps. Or simply upgrade your home DIY toolkit with what you need to service door knobs, home appliances, eyeglasses, and more.
Specifications: Technical detailsColour of productYellowWeight & dimensionsWeight10.8 oz (307g)Dimensions (WxDxH)2.37 x 8.74 x 3.37" (60.3 x 222 x 85.7 mm)Operational conditionsOperating relative humidity (H-H)10 - 80%
Specifications: Tripp Lite's professional grade, high-volume Punch Down Cable Installation Tool, with adjustable impact, is the perfect multi-purpose tool for punching down Cat5/Cat6 cable to 110 jacks and patch panels, or, telephone wire to 66M blocks. Each blade (110 or 66) contains a cutting and non-cutting side. The blade not being used is stored in the handle compartment. Adjustable High/Low actuation setting accommodates termination requirements or installer preference.