Question 1

Should I buy the Thermalright Peerless Assassin 120 SE or the Phantom Spirit 120 SE?

Accepted Answer

Choose the Peerless Assassin 120 SE when it is less expensive or easier to find. Choose the Phantom Spirit 120 SE when the price is close and you want the newer heat-pipe configuration, which commonly provides a small performance advantage in testing. Both are large dual-tower coolers with two 120 mm fans, so the difference is usually modest for mainstream gaming CPUs.

Question 2

Is the Peerless Assassin 120 SE better than the DeepCool AK620?

Accepted Answer

The Peerless Assassin 120 SE is the better value when both coolers provide similar temperatures and the Thermalright costs less. Professional testing places the Peerless Assassin and AK620 close together under high CPU loads, while direct comparison testing shows that differences depend on fan speed, noise limits, CPU, and case airflow. Choose the AK620 if its design, availability, or acoustics better match your build.

Question 3

Is the Peerless Assassin 120 SE worth upgrading to from a stock CPU cooler?

Accepted Answer

Yes, when lower temperatures, reduced fan noise, or sustained heavy-load performance matter. The Peerless Assassin 120 SE uses a dual-tower heatsink, six heat pipes, and two 120 mm PWM fans, while Intel’s Laminar RM1 is a compact cooler specified for CPUs up to 65 W. On AMD, the decision depends on the bundled cooler and processor; a stock cooler can remain adequate for a 65 W chip, but the Peerless Assassin provides more thermal capacity for extended workloads or higher-power operation.

Question 4

Is the Peerless Assassin 120 SE suitable for a compact or portable PC build?

Accepted Answer

It is suitable for many mid-tower ATX and larger mATX cases, but it is not a low-profile cooler for ultra-compact systems. Its height is listed around 155 to 157 mm depending on the product revision or listing, and the front fan may need to be raised for tall memory modules. For an SFF or portability-focused build, a 37 mm low-profile cooler such as the Noctua NH-L9 series is easier to fit; for a performance-first build with sufficient case clearance, the Peerless Assassin offers substantially more heatsink capacity.

Question 5

Is this CPU cooler compatible with my processor and motherboard socket?

Accepted Answer

It supports Intel LGA 115X, LGA 1200, and LGA 1700/17XX sockets, plus AMD AM4 and AM5. Confirm that the processor uses one of these sockets before buying.

Question 6

Will this cooler fit in my PC case?

Accepted Answer

The cooler is 157 mm tall, 135 mm wide, and 125 mm long. Check your case specifications for a CPU-cooler height limit of at least 157 mm, with additional clearance recommended for installation and airflow.

Question 7

Will it interfere with my RAM or motherboard components?

Accepted Answer

The provided specifications do not state a precise RAM-clearance limit. Because this is a 157 mm-tall tower cooler measuring 135 mm wide, users with tall memory heat spreaders or large motherboard heatsinks should verify the motherboard layout and cooler-clearance requirements before installation.

Question 8

Is this CPU cooler quiet enough for everyday use and gaming?

Accepted Answer

Its listed maximum noise level is 25.6 dB(A), and the 120 mm fan uses a 4-pin PWM connector for automatic speed control. Actual noise depends on fan speed, CPU load, case airflow, and the rest of the system.

Question 9

Who is this CPU air cooler best suited for?

Accepted Answer

It is best suited for desktop users who want a conventional tower air cooler for Intel or AMD systems, including gaming, productivity, and other sustained CPU workloads. Its 157 mm height makes it less suitable for compact or small-form-factor cases unless the case explicitly supports that cooler height.

Question 10

Is the Thermalright Peerless Assassin 120 SE worth buying for a gaming or productivity PC?

Accepted Answer

It is a suitable choice when you want a large dual-tower air cooler for mainstream gaming, programming, rendering, or other sustained CPU workloads. Its six heat pipes, two 120 mm PWM fans, and support for Intel LGA 115X/1200/1700 and AMD AM4/AM5 provide broad platform compatibility. The main trade-offs are its large size and possible RAM-clearance adjustments.

Question 11

Will the Peerless Assassin 120 SE fit with tall or RGB RAM?

Accepted Answer

Usually, but tall RAM may require moving the front fan upward on the heatsink. Community discussions commonly report that standard-height modules fit more easily, while RAM around the low-to-mid-40 mm range can require fan repositioning. Raising the fan also increases the cooler's effective height, so check both RAM clearance and the case's CPU-cooler height limit.

Question 12

Will the Peerless Assassin 120 SE fit in my PC case?

Accepted Answer

The heatsink is listed at 157 mm tall, so the case should provide at least that much CPU-cooler clearance. If the front fan must be raised to clear tall RAM, additional height may be needed. Verify the case specification rather than relying only on motherboard or socket compatibility.

Question 13

Is the Peerless Assassin 120 SE quiet enough for everyday use?

Accepted Answer

Its listed fan noise is 25.6 dB(A), but actual noise depends on the CPU, case airflow, motherboard fan curve, and fan speed. Reddit discussions report that aggressive fan curves can cause noticeable ramping or high-speed noise during sustained workloads. Adjusting the curve can reduce noise, but users seeking very low noise may prefer different fans or a larger premium cooler.

Question 14

Should I choose the Peerless Assassin 120 SE instead of an AIO liquid cooler?

Accepted Answer

Choose the Peerless Assassin 120 SE when you prefer a simpler air-cooling design without a pump and want broad Intel and AMD compatibility. An AIO may be preferable for a cleaner appearance, specific case-layout needs, or some higher-heat CPUs, but it adds a radiator, pump, and more installation components. The Peerless Assassin's trade-off is its bulky dual-tower form and possible RAM or case-clearance adjustments.

Type	Fan & Heatsinks
RPM	1550RPM
Air Flow	66.17
Noise Level	25.6db
Power Connector	3 / 4 Pin
Heatsink Material	Aluminum & Copper
Fan Mounting Types to Heatsink	Horizontal

Best Sellers

Meet Your Seller

Thermalright Peerless Assassin 120 SE CPU Air Cooler,6 Heat Pipes Aluminium Heatsink Cover, for Intel 1700/115X/1200, AMD AM4/AM5

The Thermalright Peerless Assassin 120 SE is a dual-tower CPU air cooler with six 6 mm copper heat pipes, a copper base, aluminum fins, and a 120 mm PWM fan. It suits desktop users seeking strong air cooling for compatible Intel LGA 115X/1200/1700/17XX and AMD AM4/AM5 processors.

Learn more about the Detailed Specifications

Warranty & Returns

Warranty, Returns, And Additional Information

Return Policies*

Manufacturer Contact Info

Item#: 9SIBVHXK8D7529