Tripp Lite MTP/MPO (APC) to 8xLC SMF Fiber Breakout Cable QSFP+ 40/100Gb 5M (N390-05M-8LC-AP)

The N390-05M-8LC-AP MTP/MPO to 8xLC Singlemode Breakout Patch Cable supports 40/100 Gb Ethernet speeds and is designed for high-density fiber patching between data center MDFs (main distribution frames) and IDFs (intermediate distribution frames) in enterprise installations. It's optimized for QSFP+ 40GBASE-PLR4 and QSFP28 100GBASE-PSM4 networks. Its plenum-rated jacket makes it ideal for connecting switches, hubs, routers and other high-speed network components in ceilings, walls and ducts.The 12-fiber MTP/MPO connector is about the same size as an SC connector, but is 12 times denser, freeing up rack space for other cables. The APC connector is angled to prevent infrared light entering the fiber from bouncing back into the laser. The N390-05M-8LC-AP is tested for low insertion loss and back reflection on every connector and attenuation loss that meets or exceeds current sta...Cable Type: Fiber OpticCable Characteristic: Patch CableFiber Optic Mode: Single-modeCore/Cladding Diameter: 8.3/125 mCable Length: 16.40 ftConnector on First End: 1 x MTP/MPO Female NetworkConnector on Second End: 8 x LC Male NetworkFeatures: Angled ConnectorFeatures: SlimlineFeatures: Uniboot ConnectorDevice Supported: Network DeviceDevice Supported: SwitchDevice Supported: HubDevice Supported: RouterData Transfer Rate: 12.50 GB/sColor: YellowEnvironmentally Friendly: YesEnvironmental Certification: RoHSLimited Warranty: Lifetime