Specifications: Bus Type: USB 3.1 Gen 2
Chipset ID: ASMedia - ASM1351
Compatible Drive Types (Type and Rate) : SATA
Drive Size: 2.5in
Interface USB: 3.1 Gen 2
Number of 2.5 inch bays: 1
Number of Drives: 1
Hot Swap Capability: Yes
Max Drive Capacity: Currently tested with hard drives up to 2TB at 7200 RPM
Maximum Data Transfer Rate: 10 Gbps
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s
UASP Support: Yes
Changer Type: Connector A : 1 x HDMI Female, 1 x USB-B Female
Connector B : 1 x HDMI Female, 1 x USB-A Female
Specifications: The HDMI and USB Pass Through Single Gang Wall Plate is perfect for the transition to in-wall cabling. This solution offers a clean, professional look and is ideal for classrooms, conference rooms and houses of worship.
Convenience
The HDMI and USB pass-through ports include thin, flexible pigtails that accommodate the tight bend radius required for installations within a standard junction box.
Durability
Constructed of high quality aluminum, this wall plate is designed for durability and a long life in commercial environments where constant wear and tear causes damage.
Specifications: Maximum Analog Resolutions: 1920 x 1080
Maximum Digital Resolutions: 1920 x 1080
Supported Resolutions: 1920x1080 (1080p) @ 60Hz
Wide Screen Supported: Yes
Note: This adapter will not work with Samsung Chromebooks
Humidity: 40% to 85% RH Non-Condensing
Operating Temperature: 0 to 60 degree C
Storage Temperature: -10 to 70 degree C
Specifications: Drive Connectors 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors 1 - USB 3.1 USB Type-A (9 pin; Gen 2; 10 Gbps) Male
Bus Type: USB 3.1 Gen 2
Chipset ID: ASMedia - ASM1351
Compatible Drive Types (Type and Rate): SATA
Drive Size: 2.5in
Interface: USB 3.1 Gen 2
Number of 2.5 inch bays: 1
Number of Drives: 1
Hot Swap Capability: Yes
Max Drive Capacity: Currently tested with hard drives up to 2TB at 7200 RPM
Maximum Data Transfer Rate : 10 Gbps
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s
UASP Support: Yes
Specifications: DisplayPort Compliant: DisplayPort V1.1a
DVI Compliant: DVI 1.0
Content Protection: DPCP & HDCP Input: DisplayPort Male
Output: DVI Female
TMDS Clock Rate: 225MHz max. Bandwidth: 6.75 Gbps
Video Resolution: 1080p @60Hz, 1920x1200 (reduced blanking)
3D Video Support: No
Audio Support: No Driver: Plug and Play, No Software to Install Power by: DisplayPort source
Specifications: Center Tip Polarity: Positive
Input Current: 0.8 A
Input Voltage: 100 ~ 240 AC
Output Current: 3 A
Output Voltage: 5 DC
Plug Type: M
Power Source: AC Adapter Included
Specifications: System Requirements:
Any USB-enabled operating system
Available USB-C port (USB 3.1 required to achieve USB 3.1 speeds)
2.5 in. or 3.5 in. SATA drive
UASP-enabled host controller required for UASP performance
Operating Temperature Range: 50 to 122 degree F (10 to 50 degree C)
Storage Temperature Range: 32 to 149 degree F (0 to 65 degree C)
Specifications: Converter Type: Passive
Audio Specifications: 5.1 Surround Sound
Maximum Digital Resolutions: 1920 x 1200 / 1080p
System and Cable Requirements: DP++ port (DisplayPort ++) required on video card or video source (DVI and HDMI pass-through must be supported)