CITYORK LP-E12 Card Reading Multifunction Battery Charger Case with 2-Pack LP-E12 7.4v 2000mAh Batteries for Canon EOS-M, EOS M2, EOS M10, EOS M50, EOS M50 Mark II, EOS M100, EOS M200, SX70 HS Cameras

1.
LPE12 Charging Kit: 2 Pack LP-E12 Batteries and Dual Battery Charger kit is fully fit for original Canon EOS M, M2, M10, M50, M50 Mark II, M100, 100D, Kiss M, Kiss X7, Rebel SL1, PowerShot SX70 HS Cameras and More


2. Lp-e12 Battery Pack for
Canon: 7.4V 2000mAh, 2 Pack Replacement Premium lithium ion batteries, 2000mAh high power, more shots for your cameras


3.
Multi-Function Battery Charger Case: Four-in-one charger is LP-E12 battery charger, (1) could as a camera storage case to store 2 batteries, (2) and is 2 SD card storage case. (3) have a phone power bank function (4) Can be used as a card reader to read camera memory card information.


4.
Fast Charging Charger: battery
output: 8.4V 1A*1 0.5A *2 Input, USB
OUTPUT: 5V/2A, Input: 5V/2A, It takes about 1-2 hours to charge one battery, and about 2-4 hours to charge two batteries at the same time; LCD screen, You can directly know the electricity status of the battery on the battery charger.


5.
Three Charging Way Charger: The LP-E12 lcd battery charger built with a Double-Sided Plug USB Cable ( 34.5 cm length) and Type-C port Input power up your camera's batteries, with a good-charging efficiency, only 2 hours to fully charge a battery. USB port output could as a power bank to charge your phones in an emergency


6. Switch button for
LPE12 Charger: The switch button has 2 functions, (you need to press the switch once for the output function; when it is used as a storage box, you need to press the button to turn off the power


7.
Multiple Protection: LP-E12 LCD battery charger case huge your LP-E12 batteries and SD cards tightly while in storage or travel, keeps dust, debris out of your LP12 batteries, premium quality batteries charger set built with over-charge, short-circuit, high-temperature, over-voltage protection. Discharge protection function, when the device is not charged (no output), 10S will automatically power off