Your Browsing History
- In Stock
- Sold by Newegg
Quick View
50pcs/lot Aluminum Heatsink 8.8x8.8x5mm Electronic Chip Cooling Radiator Cooler for CPU,RAM,GPU,A4988 Chipset Heat Sink
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Use heatsink adhesive glue to install heatsink .(Glue is not included) Please check the specification table and make sure the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Weight: 35g Package Content: 50 x Heatsink
- Dimensions: 8.8mm x 8.8mm x 5mm
- Model #: 11-001-256
Quick View
10pcs/lot Aluminum Heatsink 20x14x6mm Electronic Chip Cooling Radiator Cooler for IC MOSFET SCR,Router Heat Sink Extrusion Fins
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Product Description Aluminum IC heatsink for Router,power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 20mm x 14mm x 6mm,Please check your componet careful, and make sure the size of the heatsink fits it no problem Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20 x 14x 6mm/ 0.8" x 0.55" x 0.24" (L*W*H) Weight: 25g Package Content: 10pcs x Heatsink
- Dimensions: 20 x 14x 6mm
- Model #: 11-001-321
Quick View
10pcs/lot 15x15x0.4mm DIY Copper Shim Heatsink thermal Pad Cooling for Laptop BGA CPU VGA Chip RAM Memory chips IC Cooler Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.4mm
- Dimensions: 15mm x 15mm x 0.4mm
- Model #: 11-001-267
Quick View
Thermal Grizzly TG-A-015-R Aeronaut Thermal Grease - 1.5ml
- Volume / Net Weight: 1.5ml/3.9 g
- Thermal Conductivity: 8.5 W/mK
- Long Term Operating Temperature: -150 °C / +200 °C
- Specifications: Even though the amount of metallic elements in Aeronauts formula is lower in comparison to our other products, it still provides reliable and perfomant thermal conductivity. In our lab tests, Aeronaut showed a high amount of wear resistance under high temperatures, and acts also surface-protecting. The removal of Aeronaut thermal grease causes far less micro scratches on the components surface compared to other products.
- Model #: TG-A-015-R
- KWD4.93 –
- More options from KWD4.93 - KWD17.99
- KWD14.42 Shipping
Quick View
10pcs/lot 15x15x0.3mm DIY Copper Shim Heatsink thermal Pad Cooling for Laptop BGA CPU VGA Chip RAM Memory chips IC Cooler Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.3mm
- Dimensions: 15mm x 15mm x 0.3mm
- Model #: 11-001-266
Quick View
Prolimatech PRO-PK3-5G Nano Aluminum High-Grade Thermal Compound in 5 Gram
- Specifications: Material Specification: Al 70~88(wt%) ZnO 18~34(wt%) Oil 8~12(wt%) Antioxidant 0.5~2(wt%) Adhesiveness: 330000Cps Thermal Conductivity: 11.2 W/m - Degree C Thermal Impedance (Resistance): 0.013 Degree C-in2/W Included: One syringe of thermal compound and one easy-to-spread spoon Specific Gravity: 2.7g/cm3
- Model #: PRO-PK3-5G
- KWD6.92 –
- KWD9.02 Shipping
Quick View
Black Net Jacket Sleeved 6 inch 1 to 2 Motherboard 4-pin Molex CPU Case 4 Pin PWM Cooling Fan Splitter Hub Power Adapter Cable
- Type: Fan splitter cable
- Length: 6 inches
- Connector Number: 3
- Model #: 121014
Quick View
SILVERSTONE FQ122 120mm Ultra-Quiet PWM Fan
- Brand: SilverStone
- Fan Size: 120mm
- Type: Case Fan
- Bearing Type: P.C.F. bearing (Powder Copper Fluid Bearing)
- Model #: FQ122
- KWD6.99 –
- KWD12.03 Shipping
Quick View
- KWD4.62 –
- KWD14.42 Shipping
Quick View
Thermaltake UX500 ARGB CPU Cooler; 5xØ6mm Copper Heatpipes; 120mm PWM Fan; 700~1800 RPM; Intel/AMD Compatible; Single Tower; 260W TDP; Black; CL-P144-AL12SW-A
- Brand: Thermaltake
- Fan Size: 120mm
- Bearing Type: Hydraulic
- Type: Heatsinks only
- Model #: CL-P144-AL12SW-A
- KWD10.99 –
- More options from KWD10.99 - KWD13.95
- KWD13.36 Shipping
Quick View
5 Sets/10pcs Raspberry Pi B+ Pi 2 Pi 3 Anodized Black Aluminum Heat Sink Radiator CPU RAM cooler,LAN cooling (2 Heatsinks/Kit)
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
- Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
- Model #: 11-001-200
Quick View
2x6mm Copper heatpipe Heatsink with Dua 80mm 3pin Fan CPU Cooler Radiator for AMD Socket 754/939/AM2/AM2+/AM3/FM1 Intel LGA 775/1156/1155/115X
- Brand: PC Cooler
- Fan Size: 80mm
- Bearing Type: Hydraumatic Bearing
- Type: Fan & Heatsinks
- Model #: PCCMINIPLUS
Quick View
Prolimatech PRO-PK1-30G PK-1 Thermal Compound - 30 Gram
- Specifications: Weight: 30 Gram Material Specification: Al: 60~85(wt%) ZnO: 15~25(wt%) Oil: 12~20(wt%) antioxidant: 0.5~2(wt%)
- Model #: PRO-PK1-30G
- KWD14.90 –
- KWD9.02 Shipping
Quick View
StarTech.com 95mm Socket T 775 CPU Cooler Fan with Heatsink Cooling FAN775E (Black)
- Brand: StarTech.com
- Fan Size: 95mm
- Bearing Type: Ever Lubricate
- Type: Fan & Heatsinks
- Model #: FAN775E
- KWD8.98 –
- More options from KWD6.99 - KWD8.98
- KWD18.04 Shipping
Quick View
120mm PC Computer 16dB Ultra Silent 33 LEDs Case Fan Heatsink Cooler Cooling w/ Anti-Vibration Rubber,12CM Fan,12VDC 3P IDE 4pin
- Type: Case Fan
- Bearing Type: Sleeve
- RPM: <1600 RPM
- Air Flow: 50-55 CFM
- Model #: 11-001-371BL
Quick View
10pcs/lot Aluminum Heatsink11x11x5mm with 3M 8810 Thermally Conductive Adhesive Tapes Electronic Chip Cooling Radiator Cooler
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: 10 pcs of 11x11x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. T...
- Model #: 11-001-394
Quick View
5pcs/lot Aluminum Heatsink14x14x6mm with 3M 8810 Thermally Conductive Adhesive Tapes Electronic Chip Cooling Radiator Cooler
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. Th...
- Model #: 11-001-395
Quick View
10pcs/lot Silver Aluminum 25x15x11mm TO-220 TO220 heatsink radiator for MOS,7805 Triode Transistors Cooler IC Chip dissipation
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Aluminum Heat-Sink, For Package TO-220 / TO-3P / TO-247 Rectifier, Transistor or Regulator IC. Quantity: a lot of 10 Pieces. M3 Screw Hole. Size: 25 x 15x 10mm / 0.98" x 0.6" x 0.4"(L*W*H) Color : Silver Tone Weight: 4g/ piece Please check the specification table and make sure that the size of the heatsink fits that of your component
- Dimensions: 25 x 15x 10mm
- Model #: 11-001-065
Quick View
5pcs/lot Black Aluminum Fin Heatsink 25x25x10mm Electronic Cooling Radiator Heat sink for CPU,GPU Graphics Video Card dissipator
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
- Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
- Model #: 11-001-328
Quick View
- Series: MasterLiquid ML240R RGB
- Type: AIO
- Pump Speed: 3100 ± 300 RPM
- Pump Dim.: 83 x 76.2 x 52.3 mm / 3.3 x 3 x 2.1 inch
- Model #: MLW-D24M-A18PA-R1
- KWD23.35 –
- More options from KWD23.35 - KWD43.99
- KWD25.11 Shipping
Quick View
5pcs/lot Black Aluminum Fin 28x28x11mm Electronic Cooling Radiator Heatsink for CPU,GPU Graphics Video Card,1W LED dissipator
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Anodized Black Aluminum fin heatsink cooling , generally used in heat treatment and the cooling IC and electronic component, for example: RAM, CPU Memory , GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,1W LED etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 11mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 11mm/1.10" x 1.10"x 0.43"(L*W*H) Weight: 5...
- Model #: 11-001-329
Quick View
20pcs/lot Aluminum Heatsink 11*11*5mm Electronic Chip Radiator Cooler w/ 3M9448a Thermal Double Sided Adhesive Tape for IC,3D Printer,Motherboard,GPU,Xbox Cooling
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 11mm x 11mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 11mm x 11mm x 5mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 20 x Heatsink
- Di...
- Model #: 11-001-049
Quick View
20pcs/lot Silver Aluminum 19x15x10mm TO-220 TO220 heatsink radiator for MOS,L7805 LM337 Triode Transistors Cooler IC Chip
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Aluminum Heat-Sink, For Package TO-220 / L7805 /LM337 Triode Transistors Cooler IC Chipset Quantity: a lot of 20 Pieces M3 Screw Hole. Size: 19x 15x 10mm/ 0.8" x 0.6" x 0.4" (L*W*H) Thickness" 0.8mm Color : Anodized Black Weight: 2g/ piece Please check the specification table and make sure that the size of the heatsink fits that of your component
- Dimensions: 19x 15x 10mm
- Model #: 11-001-067
Quick View
2pcs Black 40x40x11mm Aluminum Heat Sink Radiator Heatsink for CPU,GPU, Electronic Chipset heat dissipation
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification product name: Heatsink; Material : Aluminium Color : Black Overall Size : 40 x 40x 11mm/ 1.6" x 1.6" x 0.49" (L*W*H) Weight : 33g Package Content : 2 x Heatsink
- Dimensions: 40 x 40x 11mm
- Model #: 11-001-191
Quick View
Fractal Design Dynamic X2 PWM GP-18 180 mm High Durability LLS Bearing Black Edition Radiator Optimized Computer Case Fan
- Brand: Fractal Design
- Series: Dynamic X2
- Fan Size: 180mm
- LED: Non-LED
- Model #: DYN-X2-GP18-PWM-BK
- KWD14.29 –
- KWD22.28 Shipping