Asterisk Card TDM410P with 2 FXO+2 FXS Modules,Supports Asterisk ,Issabel,FreePBX,VitalPBX,dahdi,TDM410 TDM400P Dahdi Card For IP SIP phone VoIP PBX

Purchase Notice:

1). The card is with 2 FXO+2FXS modules.
2). The card is with PCI connector.
3). It supports Asterisk, Issabel, AsteriskNow, Freepbx,... Dahdi driver.

You can build a telephone solution / IP PBX / call center /SIP server based on the card easily at a very low cost.

Description:

Using the card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution, IP PBX, call center include all the sophisticated features of traditional PBX, and extend features such as voice mail, IVR, Call meeting, SIP trunk, outbound route, inbound route, call waiting, call forwarding... It supports standard dahdi / zaptel drivers, can work with Asterisk / FreePbx / Issabel /AsteriskNow Dahdi...

Specification:

The card is bundled with 4 FXO or FXS modules. The FXO module is in red and the FXS model is in green. FXO port connects to PSTN line and the FXS port connects to the telephone.

Issabel, AsteriskNow,Freepbx Settings:

[Issabel. localdomain ~]# dahdi_genconf
[Issabel. localdomain ~]# dahdi_cfg -vvvv
DAHDI Tools Version - 2.2. 0 DAHDI
Version: 2.2. 0
Echo Canceller (s): MG2 Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (EchoCanceler: mg2)(Slaves: 01)
Channel 02: FXS Kewlstart (Default) (EchoCanceler: mg2)(Slaves: 02)
Channel 03: FXO Kewlstart (Default) (EchoCanceler: mg2)(Slaves: 03)
Channel 04: FXO Kewlstart (Default) (EchoCanceler: mg2)(Slaves: 04)

------------------------------------------------
Refer to,
https: //www. freepbx. org/
https: //www. issabel. org/
https: //www. asterisk. org/