Specifications: Description: Interface Bracket Kit (aluminum); aka T-Slot Bracket Kit
Includes: (1) Angled T-Slot Interface Bracket, (2) Light-Duty T-Slot Brackets, mounting hardware, manual
Light-Duty Brackets can be used with most Ergotron carts; Angled Interface Bracket can be used with Neo-Flex Mobile WorkSpace Carts, Mobile MediaCenters, StyleView 31/32 Carts and WorkFit C-Mod Workstations
Install either the Angled Interface Bracket or the Light-Duty Brackets; to deploy both types of brackets on a cart requires two kits
Consideration should be given to weight of component being mounted relative to its height on cart to avoid tip hazard
Specifications: LCD Size: < 24"
Wt. Capacity: 6–16 lbs, 2.7–7.2 kg
Lift: 5", 13 cm
Tilt: 35°
Pan: 70°
Rotation: 90° P/L
VESA: MIS-D
Description: Neo-Flex Wall Mount Lift (black)
Monitor depth greater than 2" (5 cm) may diminish capacity. Read more
Mounting Standards: VESA FDMI, MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud. To increase support, a separately-ordered Wall Track accessory is recommended
Specifications: Display size is dependent on overall configuration of the DS100 Stand; observe balance requirements to prevent tipping
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Attaches to DS100 Pole only; cannot attach to DS100 Crossbar
Specifications: Weight limitations of cart’s head-unit assembly as follows:
SV41 and SV42 SLA LCD carts = 23 lbs / 10.4 kg
SV41 and SV42 laptop carts (SLA and LiFe) = 14 lbs / 6.4 kg
SV42 LiFe LCD carts = 19 lbs / 8.6 kg
Attaches to the cart’s worksurface via included head-unit bracket, or to the back of the cart using included t-slot bracket
* If attaching to Ergotron Wall Track, separately ordered Track Mount Bracket (97-091) is required
Specifications: Description: Tall-User Kit for WorkFit Dual
Includes two (2) single monitor pivots, two (2) riser brackets, installation hardware
* Maximum outside width of display is 21.25" (54 cm) when displays are 2" (5 cm) thick. This is typically the horizontal dimension of a 22" diagonal screen-size monitor. Actual allowable width of displays will vary slightly depending on display thickness
** Weight Capacity: 6 - 14 lbs. (2.7 - 6.3kg) per display, 12 - 28 lbs. (5.5 - 12.7kg) combined
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Specifications: Description: NF Basket and Handle Kit (grey)
Includes handle, basket, mounting hardware
Compatible with Neo-Flex WorkSpace Carts and WorkFit C-Mod Workstations
Inside dimensions of basket: 5.875"H x 13.25"W x 3.125"D (149 x 337 x 79 mm)
Durable plastic and metal design
Specifications: Device Supported: Flat Panel Display
Maximum Load Capacity: 25.00 lb
Maximum Screen Size Supported: 42"
Color: Polished Aluminum
VESA Mount Compatible: Yes
VESA Mount Standard: 75 x 75, 100 x 100, 200 x 100, 200 x 200
Height: 20.0"
Depth: 33.0"
Weight (Approximate): 11.00 lb
Specifications: Description: Steel Stud Wall Mounting Kit
Includes Wall Plate, six (6) screws, six (6) anchors
Screw size = 1/4-20 x 1-1/2"
Compatible Ergotron Mounts: Neo-Flex HD Wall Mounts, LX Wall Mount Arms, 100 Series Pivots, 200 Series Wall Mounts, 400 Series Wall Mount Arms
Weight Capacity: 50 lbs (22.7 kg)
UL compliant: Tested to four times its maximum weight capacity per UL 1678 Specification (do not exceed 50 lbs/22.7 kg in actual use)