Your Browsing History
₱1,749.43
VAT-Inclusive Price
Ships from China.
Most customers receive within 7-17 days.
Meet Your Seller
Backup/Front View Camera,IP69K Waterproof Great Night Vision HD and Super Wide Angle Metal OEM Style Reverse Rear View Backup Camera for Cars Pickup Trucks SUVs RVs Vans
- Backup camera with IP69K waterproof IP rate. It designed with fully sealed glue filling craft, so it waterproof function is better than IP67 and IP68, you absolutely no need to worry about water, fog or mist inside
- Rear view camera with a latest HD 600TVL 1/2.7inch image sensor and 170 degree super wide viewing angle lens, that's great for you to check the invisible blind spot clearly and make parking safe and simple
- Reverse camera housing is metal, small size and OEM style design. Also it is built in multifunctional switching loops function, you can switch it to be front or rear view, also support guide line/distance scale line on/off switching
- Backup camera can fit most types of DC 12-24V different length vehicles. Such as Cars, Pickup Trucks, SUVs, Vans, RVs, etc. It with great night vision (low illumination level: 0.01Lux)
+
+
Overview
Specs
Reviews (1)
Useful Wire/Loop Control Design: *If you need a rear view camera with hanging mounting installation, please keep the purple wire/loop(hanging mounting is a great design for Sedan, SUV). *If you need a rear view camera with sitting mounting installation, just cut the purple loop(sitting mounting is a great design for pickup trucks, RVs and VANs) *If you need the guide line, please keep the green wire/loop; If no need it, just cut it; If you need a front view camera, please cut the white wire/loop; *If you need a front view camera without guide line, please cut both white and green wire/loop; If for a side view camera, ONLY can installed on a horizontal surface (under left or right mirror), NOT a round, slant
or perpendicular surface: look backward, keep the white wire/loop; look forward, cut the white wire/loop.
What you get: 1 x Backup Camera; 1 x 26ft/8M Extension Wire/Cable; 1x 304 Stainless Nut; 1 x Double Tape; 1 x User Manual; 1 x Electrical Tape; 3 x Wire Clamps; 1 x Panel Remover; 7 x Zip Ties; 1 x Gift Box; 1 x
Thanks Card Notes: *This backup camera WD-011 is perfect for REAR, FRONT and SIDE VIEW. Monitor/LCD/Screen/Display/Radio not included. *If connect this car backup camera WD-011 to a FACTORY RADIO, please separately order a suited Harness & Programmer to complete installation, because different RADIO need different Harness & Programmer to work together. * Mount the camera on the panel and route the wire to inside (DO NOT pinch the wire/cable when route the wire, pinched wire will damage the camera, drill a hole to allow the wire go through if needed). * Apply electrical tape for the joint of the red power wires and RCA wires, and use zip ties to fasten the wire on your vehicle. *If your head unit with a reverse triggering wire, normally it is a pink color wire, please find it, and connect it with the extension wire's triggering wire wel (small short red wire next to the RCA/AV connector). *If the image on the screen is blurry, flickering/flash or has horizontal or vertical strip, please check all your power and video connections. Possibly use a different ground point (iron part) and wrap power and video plugs with electrical tape to insulate from interference.
If it still with blurry, flickering/flash or has horizontal or vertical strip, please order a 12V DC power adapter filter rectifier to solve it, especially need for Dodge VW AUDI BMW Mercedes Benz brands vehicle. *Before you routing, if there is no image on the screen, other than check the camera, please check display setting as well. You can use other device with RCA connector, such as TV to check if the camera works. *if you want to adjust the camera view angle, please choose one suitable size gasket/shim(there are 3 different size gaskets/shims for option). And apply silicon to seal it if needed.
*For camera connection: connect the camera's male plug to female connector of the extension wire/cable, make sure the arrows to align. Also make sure to push the camera's male plug tightly into the female connector of the extension wire. Small Size Metal Housing and Mini 4PIN
Connector: rear view camera
<
or perpendicular surface: look backward, keep the white wire/loop; look forward, cut the white wire/loop.
What you get: 1 x Backup Camera; 1 x 26ft/8M Extension Wire/Cable; 1x 304 Stainless Nut; 1 x Double Tape; 1 x User Manual; 1 x Electrical Tape; 3 x Wire Clamps; 1 x Panel Remover; 7 x Zip Ties; 1 x Gift Box; 1 x
Thanks Card Notes: *This backup camera WD-011 is perfect for REAR, FRONT and SIDE VIEW. Monitor/LCD/Screen/Display/Radio not included. *If connect this car backup camera WD-011 to a FACTORY RADIO, please separately order a suited Harness & Programmer to complete installation, because different RADIO need different Harness & Programmer to work together. * Mount the camera on the panel and route the wire to inside (DO NOT pinch the wire/cable when route the wire, pinched wire will damage the camera, drill a hole to allow the wire go through if needed). * Apply electrical tape for the joint of the red power wires and RCA wires, and use zip ties to fasten the wire on your vehicle. *If your head unit with a reverse triggering wire, normally it is a pink color wire, please find it, and connect it with the extension wire's triggering wire wel (small short red wire next to the RCA/AV connector). *If the image on the screen is blurry, flickering/flash or has horizontal or vertical strip, please check all your power and video connections. Possibly use a different ground point (iron part) and wrap power and video plugs with electrical tape to insulate from interference.
If it still with blurry, flickering/flash or has horizontal or vertical strip, please order a 12V DC power adapter filter rectifier to solve it, especially need for Dodge VW AUDI BMW Mercedes Benz brands vehicle. *Before you routing, if there is no image on the screen, other than check the camera, please check display setting as well. You can use other device with RCA connector, such as TV to check if the camera works. *if you want to adjust the camera view angle, please choose one suitable size gasket/shim(there are 3 different size gaskets/shims for option). And apply silicon to seal it if needed.
*For camera connection: connect the camera's male plug to female connector of the extension wire/cable, make sure the arrows to align. Also make sure to push the camera's male plug tightly into the female connector of the extension wire. Small Size Metal Housing and Mini 4PIN
Connector: rear view camera
<
Warranty & Returns
Warranty, Returns, And Additional Information
Return Policies*
- Return for refund within: 30 days
- This item is covered by BEYOND Return Policy
- *Subject to applicable law
Warranty Notice:
This product does not include manufacturer warranty when purchased or used outside of its designated sales region. By purchasing internationally, you acknowledge that warranty support from the manufacturer will not be available.
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...