Specifications: Converts Parallel ATA to Serial ATA
Supports ATA 100/133
Fit for 3.5" IDE HDD DVD.
One 40pin IDE port.
One Serial ATA port.
One 4pin power connector
Package Contents: 1 x bridge board
1 x Molex power cable
Specifications: The perfect solution for setting up Ethereum mining rigs, whether small open air rigs or large rack based miners. 4 High Quality Solid Capacitors for stable and safe power delivery. Multiple Voltage Regulation Components (Voltage Regulating Diode and Linear Regulator) Overcurrent Protection (Surface Mounted Fuse) to safeguard your components in the event of a short circuit. Thin and fast USB 3.0 cable available to connect PCI-E 1X and PCI-E 16X sides for more free installation and faster data transfer for graphics card. Integrate Molex 4pin, SATA and 6-pin PCI-E power interface on PCB for direct connection to your power supply ,reduces the power burden on your motherboard and ensures maximum compatibility with your power supply. 1X PCI-E Card exits motherboard slot at a 90 degree turn, easy cable manage for Small Form Factor Computer Case 1x adapter PCI-E c...
Specifications: Size: 45mm x 33mm x 15mm( with adhesive) Fan Speed controller High position for 12V out put Low position for 7V output Off position for fans shut down Support total 8 fans 12V/2A max.
Specifications: This cable features Large Internal Molex 4pin Power Male, to Small Internal Power Female connectors.Convert a LP4 4pin IDE power plug into a floppy type SP4,Suitable for adding SP4 equipted adapters, floppy drives etc. SPec Type : Molex LP4 to SP4 power adapter cable Connector A : Molex Large 4pin Male Connector B: Molex small 4pin Female Cable Length : 15CM/6 inches Voltage: 5V/12Vcd
Specifications: 3 High Quality Solid Capacitors, Voltage Regulation, and Overcurrent Protection. 60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. Molex 4 PIN interface allows card to run off of separate power rails independent from motherboard effectively reducing power strain on motherboard Version 008S riser kits are the perfect solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners. Compatible with 1x, 4x, 8x,16x PCI-E motherboard slots for ethereum mining Note: Please set BIOS PCIe to GEN2 or GEN 1 if graphics card can not be identified or marked '!' warning sign
Specifications: Converts Serial ATA to Parallel ATA
Supports ATA 100/133
Fit for 3.5/2.5 SATA HDD DVD.
One 40pin IDE port.
One Serial ATA port.
One 4pin power connector.
Chipset : JM20330
Features: SATA to IDE Adapter ("Convert SATA Hard Drive to IDE Hard Drive")
Connect a SATA hard drive to you IDE motherboard with this SATA to IDE Adapter
Turn your SATA hard drive into IDE interface hard drive
Features the JMicro JM20330 chipset
Compliant with SATA specification and supports up to 2TB hard drives
Specifications: Fits in Standard 5.25 inch Driver Bay and may not fit in chassis with customized Bay Please ensure the 5.25 inch Driver Bay of your computer is standard size before ordering this item.
2 x 2.5 - inch Drive could Mounted to this ITEM at the Same Time. However Mounting only ONE drive is recommended for heat dissipation.
SATA III 6Gbps data cable included
Molex to SATA 15-pin power cable include, support 12V/5V PSU
Package Contents: Mounting Bracket
12 (6+6) inch Molex 4 Pin to x2 15 Pin SATA Power Cable with Net Jacket
10inches SATA III 6Gbps Data Cables with latch locking
1x Mounting Screws Pack is included
Specifications: SATA 15 Pin male to Molex 4 pin female adaptor
Easy migration to SATA power
Convert an existing SATA power connector to molex power connector
Specifications: Compatible with 2.5" SSD or HDD
Allows a standard desktop or server without 2.5" bays to accomodate slim SSD or HDD.
Coverts 3.5" drive bay into 2.5" drive bays to support 2.5" based SSD or hard drives.
With Drive Screws and Adapter Case Screws
with SATA data cable and power cable
Package Contents: 2.5 to 3.5 HDD adapter, 18 inch SATA Data cable,6 inch Molex 4Pin to SATA 15pin power cable, screws bag