Specifications: Weight Capacity: 50 lbs (22.7 kg)
Maximum CPU Dimensions: 18" x 8.5" (457 x 216 mm)
Minimum CPU Dimensions: 9.4" x 2.6" (239 x 66 mm)
Mounting Options: Directly to wall; under desk; to Ergotron Wall Track (interface bracket required, 97-091); to Ergotron Command Post (interface bracket required, 60-366); to 2" round pole (interface bracket required, 60-131-003); on Ergotron Mobile WorkStand Cart (interface bracket required, 60-131-003); on Ergotron LX Large Display Cart or Neo-Flex Mobile MediaCenter; on Neo-Flex Laptop and LCD Carts; on StyleView SV40/41/SV42 EMR Carts and StyleView SV32 PHD Carts
Specifications: Part Number: 97-468-202
Description: Vertical Universal CPU Holder (silver)
Includes CPU holder, spacer, bumpers, wall mount fasteners, security nuts and bolts
CPU Size Range: 2" to 8" (50.8 to 203 mm) wide; includes plastic spacer to accommodate most small form factor and ultra small form factor CPUs
Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud. To increase support, a Wall Track accessory and bracket kit (60-156), both ordered separately, are recommended
Shipping Dimensions: 10.7"H x 7.7
Frees up work space
Mounting versatility: Installs directly to any sturdy vertical surface or Ergotron Wall Track system
Durable steel construction
Includes fasteners for locking the holder’s width
Accommodates CPUs from 2" to 8" (5 to 20 cm) wide
Handles loads up to ...
Specifications: Description: Interface Bracket Kit (aluminum); aka T-Slot Bracket Kit
Includes: (1) Angled T-Slot Interface Bracket, (2) Light-Duty T-Slot Brackets, mounting hardware, manual
Light-Duty Brackets can be used with most Ergotron carts; Angled Interface Bracket can be used with Neo-Flex Mobile WorkSpace Carts, Mobile MediaCenters, StyleView 31/32 Carts and WorkFit C-Mod Workstations
Install either the Angled Interface Bracket or the Light-Duty Brackets; to deploy both types of brackets on a cart requires two kits
Consideration should be given to weight of component being mounted relative to its height on cart to avoid tip hazard
Specifications: Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
LCD Size: 30"
Capacity: 31 lbs
Rotation: 360° P/L
Attaches to Crossbar and Crossbar Extenders
Cannot be used as the Center Display Bracket when three displays are attached to Crossbar
Install displays with 4°-angle off-set : position them upward, inward or downward for optimized viewing conditions
Specifications: Colour: black
Includes 200 Wall Mount Pivot, wall mount bracket, 1 extension, VESA mounting screws
Extends up to 14.8" (37.6 cm) from the wall and retracts to within 5.8" (14.8 cm), excluding depth of monitor
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
Weight Capacity: 25 lbs (11.3 kg)
Monitor depth greater than 3" (7.5 cm) may diminish capacity
Durable, easy-to-clean powder-coated painted steel exterior
Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud
Specifications: Screen: <= 34.00"
Lift: 13.00" (33.00 cm)
Tilt Range: 70 degrees backward, 5 degrees forward
Pan: 360 degress
Rotation: 360 degrees
VESA: MIS-D
Mounting Options: Desk Clamp attaches to surface edge 0.40" to 2.40" (10.00 to 60.00 mm) thick; Grommet Mount attaches through surface holes 0.31" to 2.00" (8.00 to 50.00 mm) wide and up to 2.25" (57.00 mm) thick
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100.00 x 100.00 mm & 75.00 x 75.00 mm)
Weight Capacity: 7.00 to 25.00 lbs. (3.20 to 11.30 kg). With monitors greater than 20.00 lbs. (9.10 kg) in weight, the vertical range of motion may be reduced up to 4.50" (11.00 cm) for a total height range of 8.50" (22.00 cm)
Note: If installed on WorkFit-T or WorkFit-TL, maximum allowable monitor weight is reduced to 14.00 l...
Specifications: Color: Black
Includes non-slip pad and clips to hold notebook in place; screws for tray attachment to mount
Note: This is not a stand-alone product. It should be combined with a separately ordered arm, pivot or cart for a complete solution
Weight Capacity: When combined with the LX LCD Arm, the arm will hold notebooks weighing 2.5 – 12 lbs (1.1 – 5.4 kg); when combined with other arms or pivots, contact Ergotron regarding load limitations
Attachment to a separate LCD mount requires a VESA MIS-D 75 x 75 mm hole pattern interface on the mount. Recommended mounts include LX LCD Arms, 200 Series Arms, 100 Series Pivots and Ergotron carts utilizing an LCD monitor pivot
Specifications: LCD Size: < 24"
Wt. Capacity: 31 lbs (14 kg) per monitor; 124 lbs (56 kg) total
Rotation: 360° P/L
VESA: MIS-D
Description: DS100 Quad-Monitor Desk Stand (black)
Includes: Base, 28" pole, two (2) Paraview bows, four (4) sliding brackets, manual
Maximum LCD outside width is 23-1/4" (59 cm)
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole pattern: 100 x 100 mm & 75 x 75 mm)