BONAEVER 2-Bay USB Smart 18650 Battery Charger Smart Multifunctional Battery Charger for 18650 26650 14500 16340 10440 RCR1233.2V LiFePO41.2V Ni-MH Ni-Cd AA with 2 LED Indicators

Features:

18650 charger: Fit for Most of Battery Type,C,SC Battery,Li-ion 3.7V 3.8V 3.85V,1.2V Ni-Mh Ni-Cd,3.2V LiFeO4 Battery,RCR123A;C,SC Battery,Ni-Cd Ni-MH Battery,Li Fe,18650,26650,18490,18350,17670,17500,16340 (RCR123),14500,IMR 10440,LiFePO4,Ni-MH,Ni-Cd,AA,AAA.

[Automatically Recognized Battery Type & Solar Panel Charging Capable]: (Note) It automatically recognizes Li-ion 3.7V and NiMH (AA 1.2V) batteries. If the battery is 3.2V LiFePO4 or Li-ion 3.85V, only need to press the Select button to switch.

[USB 5V DC input - More Safyty and Convenient]: No need to buy extra adapter; 500mA,1000mA 2 charging options take care and quick charge batteries of different types and capacities.

[Support USB 5V-1A Output Discharging]: When charging devices,like mobile phones,you should ensure that the battery level is above 70%.After 5-10 minutes of the charging, the voltage will drop, and it can not continue to charge. You need to remove the battery for 2-5 minutes and then reinstall the battery to charge your mobile phone again. This function is designed for emergency cases. Most of the time, you can use it as a perfect battery charger.

Please note: Unplug the battery after charging is complete

1.Buttons : While electricity is connected,

1) press the button to change the battery type,it will start to charge 5 seconds after setting the battery type (3.2V or 3.85V),

1.2V Ni-MH and 3.7V li-ion can be detected automatically,so it need set for only 3.2V and 3.8V batteries;

2) change the charging current amount 2 current (500mA/1000mA) at any time during charging by long press the button.

2.LED: While connect it to 5V input, all LED light up immediately,

1) If no battery is put in, 500mAh LED keeps on and others will go out.

2) When battery is detected in, 4 LED lights on AND 3.7V LED keep flicker to indicate to set the battery type,

if no operation,it begin to charge 5 seconds later automatically under detection,four LED lights will display the charging status.

3) Tap the button can show the battery type for 5 seconds.

4) No electricity is connected, insert a battery can quick shows the remaining battery volume.

3.USB output indicator:

When USB discharging port detected,indicator of battery volume will light up for 10 seconds and go out, press button to light up again.

Features:

Compatible Battery: C Battery,SC Battery,Ni-MH Ni-Cd 1.2V Battery,Li-Fe 3.2V,Li-ion 3.7V,Li-ion 3.85V,26650,22650,26500,18650,18490,17670,17500,17355,16340,14500,10440,etc

5V USB adapter (adaptor current 2A) is recommended.

Input : Micro USB DC 5V/2A.

Output: 1.42V 4.2V±0.05V 3.65±0.05V 4.35±0.05V.

Current: 1000mA 500mA

Constant voltage, cut-off current: less than 100mAh.

Standby current: less than 15mAh.

Size: 112mm× 90mm×30mm

Package include:

1x battery charger

1x USB cable

1x User guide book.