Joined on 04/09/04
Great gaming monitor if looking for contrast and blacks
Pros: High contrast and blacks - black level is adjustable. OSD - nice layout and easy to navigate with the joystick. Upgradable firmware - gaming monitors should offer this as standard, features can always be improved and tweaked. Three-button quick select - stores user custom monitor settings. You can easily switch between custom settings for gaming, desktop work, etc. Curved monitor - enjoyable for 1st/3rd person gaming, the field of view is closer to your actual viewing angle and gives a simulation of depth. Color - 125% RGB, good brightness, and it's 10-bit (8-bit + FRC). HDR - it looks great compared to not having any and it isn't overly bright, but it is limited compared to some other monitors. Business monitor looks - rear accent LED can be shut off, no angular styling or large logos.
Cons: Monitor stand - good quality but it's deep, so shallow desks up against walls might have problems. OSD - shows the monitor's max refresh rate setting, not the current refresh rate with FreeSync enabled. Curved monitor - at only 27" and 1800R it might make desktop apps that you typically print from seem a little strange. Viewing angle - if you're used to an IPS it's a step down, but it's better than a TN. MBR (strobe backlighting) - brightness isn't user adjustable. Backlight bleed - this monitor does have some blacklight bleed, mostly around the edges. But it's a lot better than IPS monitor glow. Blacks still look black. AG coating - this monitor has a light AG coating, see below. Ghosting w FreeSync - Some, but also depends upon gaming options selected. I leave mine fixed at 144 Hz. See comments below.
Overall Review: The overall build quality of this monitor is great. No bright/stuck/dead pixels that I have identified. No color issues, banding, or horizontal lines. To make sure I had the best experience with this monitor I made sure I had the latest monitor firmware and installed Samsung's monitor drivers as opposed to using the generic Windows drivers. My graphics card identified this monitor as having 10-bit color. The monitor is factory calibrated but still benefits from tweaking. The primary reason I purchased a VA-panel monitor is because of the contrast and blacks. Some people report "black crush" issues with VA panels, but I haven't noticed any or very little. Make sure to adjust your black levels correctly though and not bottom them out - use online web tools for black level adjustment. Bottoming out your black levels makes a lot of darker colors appear black, and makes all other colors unnecessarily dark, which exacerbates the issue. This monitor does have a light AG coating. But like 3rd party reviews comment, the LCD seems to have an underlying rough texture to it. So lighter colors on static backgrounds will appear grainier than they should. It's not bad though, and I've seen worse compared to other monitors specified with light AG coatings. Nearly all FreeSync monitors do not implement variable, or even stepped overdrive that changes with the monitor's refresh rate. (Samsung, firmware upgrade?) Because VA panels have the slowest pixel response times, their optimized overdrive frequency has limited range and you will notice ghosting/artifacts to a greater extreme than IPS/TN panels. Once I start dropping below 100 Hz I can notice ghosting/artifacts around certain color transitions and it gets worse the lower I go. However, if for 1st/3rd person gaming you have motion blur or depth-of-field enabled this will probably blend in and won't be noticeable (I don't use these options). I have the best visual/gaming experience leaving my monitor locked at 144 Hz. When I run my monitor at 144 Hz and specifically LOOK for ghosting/artifacts I still notice a little bit around darker colors, but when actually gaming I don't notice anything. I also haven't noticed any v-sync stutter or input lag at 144 Hz without using FreeSync. I didn't encounter any FreeSync flicker (nVidia card) when engaged, but I averaged +70 Hz and didn't drop into LFC. One disadvantage of this monitor is that the overdrive isn't user adjustable (Samsung, firmware upgrade?), but it is dialed in at +120 Hz. If you want a 144 Hz gaming monitor with great contrast, blacks, and 10-bit/wider color gamut I'd highly recommend this monitor for the price, especially when it's on sale/promo. If it had user adjustable and variable/stepped overdrive it would be an ideal VA FreeSync package. Most 27" 1440p VA-panels are made by Samsung, so with different monitor brands you get different panel specs, OSD options, and backlight/overdrive differences. I have no regrets switching from an IPS monitor to a VA for gaming, they have their disadvantages but the vivid color and contrast more than make up for it in my opinion.
Pros: Visually looks like a nice, well-built card. Large heat sink. PCIe bus powered only, which was the primary reason I purchased it.
Cons: I purchased this card because of the rebate at the time, but am now RMA'ng it. During 3D applications my monitor would "blank out" for about 1-2 seconds every minute or so. Computer never locked up, and apps continued to run in the background. Worked with ZOTAC support, even though current PSU should be big enough, 500W 26A @ 12V, I upgraded to another power supply I purchased on NewEgg – 600W 45A @ 12V. PSU didn’t solve problem. ZOTAC support wouldn't contact me back after reporting that the PSU didn't fix the issue. So now down additional money on the PSU, but it's nice and also got it on sale so I won't return it.
Overall Review: I didn't process the rebate on this card or registered the free game offer that came with it at the time, so I asked if NewEgg would match the rebate on a different card because there were some good sales on at the time that I now missed. They said they couldn't, but gave me a small credit back. Free return shipping and no restocking fee on the RMA. Good service from NewEgg overall.
Nice graphics card, disappointing MSI warranty policy for new out-of-the-box items.
Pros: - Overall good build quality, except for my issue. - Great performance. Beats my overclocked 1070 hands down concurrently jumping from 1080p to 1440p. - Nice software for overclocking and lighting. - Nice Mystic Light effect if you have an open case. Not overly flashy. - Even though heavier and larger than my previous graphics card, the backplate and case fitment prevent it from sagging. - Quieter and cooler running than my previous graphics card. - Twin-fan cooling. A lot of higher performance cards are going to 3 fans now. I don't know how many cases have space for that.
Cons: - It's a bit bigger and chunkier than some other 2-fan graphics cards. But the larger fans and heatsink reduce noise and temps. - Bad MSI warranty policy for defective items out-of-the-box. Thermal tape wasn't applied correctly, possible future overheating issues.
Overall Review: I've had this graphics card for almost two months now and have had good luck with it, but I haven't tried overclocking it yet. I took a closer look at the card after 30 days had passed and noticed that the thermal tape applied to a row of capacitors directly under the heat sink was not covering several of them. I contacted MSI support with pictures and they admitted that the thermal tape was cut short and should be covering all the capacitors. MSI processed a return for me. After receiving the warranty/return details I was extremely disappointed, especially since the product was not assembled correctly and defective out of the box. I have to pay for return shipping. I wouldn't receive a new card, but a refurbished one in its place. Turnaround time is 15-30 business days, not including shipping. So that's about 4-7 weeks real time. I haven't decided yet if I want to send it in, or see if it burns up and then warranty it. Luckily I still have an old graphics card. Otherwise it's a good product. But MSI's out-of-the-box warranty policy isn't great. That's like buying a new hard drive with vibration issues, and getting a refurbished one as a replacement 4 weeks later.
Good performance for price, but worst IPS viewing angle I've seen.
Pros: - Overall image quality is good once you make some OSD adjustments. See tftcentral for a good calibration starting point. - Excellent overall build quality. - Little backlight bleed. - If not for my viewing angle con totally worth the price vs performance.
Cons: - OSD is basic and clunky for adjusting. They could have added another button on the monitor to make it a lot easier. - Light AG coating was more moderate than light. Easily noticeable. - Worst upward viewing angle I've ever seen for an IPS display. You can notice the color/brightness shift when tilting the monitor for viewing. - Two stuck pixels on right side of the screen.
Overall Review: For the price, the monitor was well built and overall image quality was good with some OSD adjustments, the AG coating was a letdown for me though. When doing desktop applications with white backgrounds the AG coating was notably grainy and made the whites and text look dull. It was a little distracting. This monitor has the worst upward viewing angle I've seen for an IPS display. Looking down at the monitor or from the side is great, however once you start to look upward at the monitor the brightness and color drop off fast. Once you pass about 30 degrees the monitor is extremely dark and the colors are washed out, but once you hit about 45 degrees you can't tell what's on the screen. I would include pics if possible. Totally unacceptable for an IPS display. 1 egg because you buy a monitor to look at it. Update: I changed my review to 3 eggs. After talking with Nixeus support and sending in pics, my monitor was identified as a limited-production unit that included a polarizing filter (to reduce backlight bleed) and a different AG coating. This was the cause of the poor viewing angle. Nixeus support was very helpful and was happy to replace it free of charge with a standard production monitor, but I sent it back for a refund. If the other AG coatings are similar to this monitor it was excessive for me.
Pros: Price. Nice solid design. Aluminum, don't think breaking it would be an issue. Transfer speeds aren't too bad considering its size. Will easily fit in an under/over USB port where the adjacent port is occupied by a mouse or other USB plug. Not many mainstream flash drives allow this anymore (I have a Cruzer micro that still does), and for laptops it's very inconvenient when a flash drive uses up two USB slots.
Cons: Its write speed is a little on the slow side. But again, for its size I think it's fairly quick. I've still seen full-size flash drives and SD cards with slower read/write speeds. I miss a little LED activity light, but you can't get one with a drive this small. I wouldn't recommend this drive if you'd want to use it to copy and transfer massive amount of files. But if it's for backup, installers, critical files, portable apps, it works perfectly fine. Just don't forget to take it with you!
Overall Review: I don't know if this is made by HP or PNY. Regardless, I haven't had problems with either of their products (flash, RAM, video cards). They don't make the fastest products out there, but I haven't had one fail or have data corruption issues yet. I don't think reliability would be an issue. I have noticed that sometimes it gets a touch warm when reading/writing a lot of data, but nothing that concerns me – again, it's a small drive so that's to be expected.
nice enclosure, small size
Pros: 1. Works 2. Nice blue/red LED to signify power on and read/write 3. Small size 4. Nice power on/off toggle switch 5. Keeps drive pretty cool (I have a 1 TB Hitachi drive and after 12hrs of straght backup drive was under 50 degrees C, case only slightly warm to the touch)
Cons: 1. USB and eSata cords are too short. If you place the enclosure directly on top of or besides your PC they're work. If you want to put the enclosure on top of a desk it won't reach. 2. Some people report power problems? (see other thoughts) 3. Some people report data corruption? (see other thoughts)
Overall Review: I have this exact enclosure, except the Brown color that NewEgg also sells. Regarding power, my adapter fits fine, no power interruption or needing to drill the back plate as others have done. Regarding data corruption, I had two issues with the enclosure (eSata connection) at first because it would randomly dismount itself from my PC when it wanted too. Usually in the middle of reading/writing data. That wasn't the enclosure's fault though, I discovered my eSata controller drivers were over 3 years old. After updating my eSata drivers (from JMicron) it's worked flawlessly since. If you're having data corruption check your eSata drivers. Most motherboard and PC manufacturers never post updates for them...