Specifications: Description: 8 Digital Inputs and 8 Digital Outputs
Digital Inputs: 8
Logic Level 0: -30.0V to +1.0V
Logic Level 1: +2.0V to +30V
Latched Inputs: Triggered by user programmable positive or negative edges, stays true until acknowledged
Counter Inputs: User progammable- counts positive or negative transitions up to 100Hz
Watchdog: Active high/low, Pulsed high/low
Digital Outputs: 8
Digital Output Type: Open drain transistor, protected MosFET. Short circuit protection up to 36V. Over temperature shutdown -175°C typical 150°C min
Maximum Output Load Voltage: 30 VDC
Maximum Output Current Sink: 0.85A per channel
Serial Gateway: RS485 NuDam/ADAM compatible gateway
Number of Ports: 1
Network Port Type: RJ45 Jack 10/100 MHz Autosensing, Cross Over Autosensing (MDIX)
Network Protocols: ICMP, IP, TCP, DHCP, HTTP
Protection: 1500V M...
Specifications: Standards:
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3ab
IEEE 802.3af
IEEE 802.3at
Device Interface:
1 x Gigabit PoE/PoE+ in port
1 x Gigabit PoE/PoE+ out port
1 x Power port (optional power adapter is not included)
LED indicators
Installation mounting points
Data Transfer Rate:
Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
Gigabit: 2000 Mbps (full duplex)
Power:
Powered by PoE/PoE+ Device
Consumption: 2 Watts (max.)
Specifications: Interface:
Input Port
1 x RJ-45 STP
Data In
Output Port
1 x RJ-45 STP
PoE (Data + Power) Out
DC socket
56V DC Input
LED Indicator:
System: Power x 1 (Green)
PoE Port: PoE in Use x 1 (Green)
Network Cable:
Ultra PoE (60W): 10/100/1000Base-T: 4-Pair UTP Cat. 5e, 6 up to 100m (328 ft.)
802.3af/at PoE(15W / 30W): 10/100/1000Base-T: 2-Pair UTP Cat. 3, 5, 5e, 6 up to 100m (328 ft.)
Data Rate: 10/100/1000 Mbps
Unit Input Voltage: DC 56V
Power Requirements:
External AC-to-DC adapter
100-240V AC, 50/60 Hz, 1.5A
Power Consumption: 65 watts max.
PoE Standard: IEEE 802.3at High Power over Ethernet End-span / Mid-span PSE
Power Output:
DC 56V / 60-watt PoE via 4-pairs
DC 56V / 30-watt PoE via 2-pairs
PoE Power Supply Type: End-Span + Mid-Span
Power Pin Assignment:
Pair 1: 1/2 (-), 3/6 (+)
Pair 2: 4/5 (+), ...
Specifications: Power-over-Ethernet (PoE) adapter for products with 10/100/1000-BaseT PoE inputs.
Indoor-rated.
Supports power up to 60W.
Input: 100 - 240V AC, 50 / 60 Hz 1.0A
Output: 48V DC 1250 mA (60W)
Data port: RJ-45 jack
PoE/data port: RJ-45 jack
Dimension: 4.84" x 2.40" x 1.57"
Kit Content:
1 x Country-specific power cord, IEC, 6ft
1 x PoE module (10/100/1000Mbps)
Specifications: Product Type: Media Converter Chassis
Dimensions: 4.75" x 17.00" x 15.00"
Package Contents:
E-MCR-05 12-slot Media Converter Rack
12 univeral rack mount media converter brackets
Specifications: Serial Port
Ports: 2
Protocol: RS232
Connector: DB9 Connector - 9 Pin Male
Tx FIFO Size: 256
Rx FIFO Size: 32
Operating Distance: EIA - RS232 Standard
Cable: No Cable; Integrated Connector
Serial Port Settings
Max Baud Rate: 1,000,000 (1 MegaBaud)
Data Bits: 5, 6, 7 or 8
Parity: Odd, Even, None, Mark or Space
Stop Bits: 1 or 2
Flow Control: RTS / CTS, DSR / DTR, XON / XOFF
Tx / Rx Modes: Point to Point
Power
Power Input: Power Over Ethernet OR 5 - 30V DC input, reverse polarity protected
Power Over Ethernet: IEEE 802.3af
Power Supply 1 Description: Optional Global Power Supply - PW-800
General
Mounting Accessories 1 Description: DIN-Rail Mounting Kit - MK-048
PCB Layers: 4
Operating System Compatibility
Operating Systems:
Communicate with Device over TCP from any OS
Microsoft Windows 10
Microsoft Windows 8 32 bit & 64 bit Editi...
Features: • Mount two TRENDnet TL2-FG7120 switches together in 1U/RU rack space • Includes two metal mounting brackets with screws for connecting two TL2-F7120 switches • Rack installation requires TL2-F7120 short brackets (included only with TL2-F7120) • Compatible only with TRENDnet TL2-F7120 switches
Features: • Hardened IP30 rated Gigabit PoE++ Injector
• PoE (15.4W), PoE+ (30W), or PoE++ (90W) power
• Network a PoE device located up to 100m (328 ft.) away
• Extreme -40 to 75 °C (-40 to 167 °F) operating temperature range
• Redundant power inputs with overload current protection
• Includes DIN-rail mount and wall mount
• Power supply sold separately (model TI-S15052,
Specifications: Kit Content:
1 x PoE module (10/100/1000 Mbps)
1 x AC cable (length 2 ft. / 0.6m)
LAN port: RJ-45 jack
PoE port: RJ-45 jack, 24 Watts PoE
AC input: 100 - 240 V AC, 50/60 Hz
Specifications: Interface:
Wi-Fi
Micro USB (Support USB 2.0)
Color: White
Capacities: 32GB
Network Standard: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
Operating Frequency: 2.4 GHz / 5 GHz
Ports:
1 x SD Card Reader
1 x Micro USB
Button: Reset Button, Power Button, Channel Switch
LED Indicator:
1 x Power
1 x Wi-Fi
System Requirements:
Windows 10 86x64
Windows 8 86x64
Windows 7 86x64
Mac OS X 10.6 or higher
iOS7 or higher
AndroidTM 4.0 or higher
Kindle Fire HD and HDX
Specifications: No. of Ports: 12
Pass Through Data Rates 10/100/1000 Mbps
PoE Output:
Pin Assignment and Polarity:
Data Pairs 1/2 (-) and 3/6 (+)
Spare Pairs 7/8 (-) and 4/5 (+)
Output Power Voltage: 54-57V DC
User Port Power: 72W Typ.
Aggregate Power: 1000W
Input Power Requirements:
AC Input Voltage: 100 to 240V AC
DC Input: 57V (RPS or another 9500G midspan)
AC Input Current: 450W Units: 5.5A @ 110V AC; 2.75A @ 220V AC
1000W Units: 12A @ 110V AC; 6A @ 220V AC
AC Frequency: 50 to 60 Hz
Management PowerView Pro included
Indicators:
System Indicator: AC Power (Green)
User Indicator: Channel Power (Green / Orange)
Connectors:
PoE ports and management port: Shielded RJ-45, EIA 568A and 568B
Console Port: USB Connector Type B
DC Connector: DC Block Terminal
RPS Com Connector: HD-D-sub-15