LAUNCH X-431 GIII X-PROG 3 Car Key Programming Scan Tool with EEPROM Adapter for X431 V/V+, PRO 3, PRO 3S+, PRO 5, PAD III and PAD V, etc. Advanced Immobilizer & Key Programmer
X-431 GIII X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device thatcan read and write keys to the vehicle. X-PROG 3 enables anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading and anti-theft component replacement. Supported brands: VW, Audi, Skoda, Seat, BMW, Mercedes-Benz, Mini and more continue to be updated.
Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading and writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.
Supported models: 60+ brands in America, Europe and Asia. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc. More models and systems continue to be updated.
Compatible with: X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII, X431 V, X431 V+, X431 PRO3S+.
X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.
Highlights:
1. All-in-One Key Programmer. Integrates Multiple Function Models
2. Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
3. Compatible with Multiple X-431 Series Diagnostic Tablet: X-431 V, X-431 V+, X-431 PAD V, X-431 PAD VII, X431 PRO 5, X431 PROS V 4.0, etc
4. Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
5. Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
6. Enables Reading/ Writing EEPROM, On-Board MCU and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.
Launch GIII X-Prog 3 Features:
1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/ writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code.
2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.
Read/write for BMW CAS4+ and FEM chips Reading and writing car key chip Read for BMW engine ISN code Read/write EEPROM MCU....
3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Compatible with: X431 V, X431 V+, X431 ProS, X431 PRO GT, X431 PRO V 4.0, X431 PRO 3 V 4.0, X-431 PRO 5, X-431 PAD III V 2.0, X-431 PAD V, X-431 PAD VII
5. Reads & writes most Engine/ Gearbox ECUs without disassembling the shell
Update Note: Launch X431 GIII X-Prog 3 latest update for RESET PROG (V 10.05 ) Function:
1) Added ECU reading and writing functions for 10 models of Siemens Engine including MSD80, MSD81, MSD85, MSD87, MSV90, SIM271DE, SIM271KE, SIMOS 8.4, SIMOS 8.5 and SIMOS 8.6; 2) Added ECU reading and writing functions for 5 models of Transmission including 9G_Tronic, DQ380, AL551, AL450 and 8HPXX.
Launch GIII X-Prog 3 Advantages:
1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).
Supported Brands: VW, Audi, Skoda, SEAT, BMW, Mercedes-Benz, Toyota (updates to be continued)
Supported Systems: Engine system, automatic transmission, instrument system, CAS, body system, lock system
Compatible With: X-431 PRO V 4.0, X-431 PRO 3 V 4.0, X-431 PRO 5, X-431 PAD III V 2.0, X-431 PAD V, X-431 PAD VII, X431 V, X431 V+, X431 PRO3S+, X-431 PRO GT ect.
Core Functions:
1. Integrated the functions of key matching/ copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through an independent harness without removing the IC).
4. Supports ECU replacement for the fourth-generation of VW/ AUDI engine;
5. Supports ECU replacement for the fifth generation of VW/ AUDI Bosch and Siemens engines.
6. Supports all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
12. Supports VW/ AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
13. Supports ECU replacement for the fifth generation of Audi (0AW/0B5) gearbox.
14. Supports reading, writing & cloning the ECU for the fourth generation of VW UDS engine.
15. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
16. Works with reprogramming device to backup/ restore programming data (For Bosch/ Siemens engine ECU).
How to Use X-PROG3 to Read and Write Data?
Method 1: Directly connect to OBD16 for key matching, data reading and writing, etc Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host Method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host.
Package List:
1pc x Launch X-PROG 3 1pc x Power adaptor 1pc x Main diagnostic cable 1pc x The fourth-generation data acquisition cable 1pc x The fourth-generation of EEPROM data acquisition cable (without dismantling dashboard) 1pc x BENCH mode cable 1pc x MCU converter V1 1pc x MCU converter V2 1pc x MCU cable with multiple leads 1pc x EEPROM chip adaptor 1pc x Benz infrared analog acquisition key 1pc x MCU cable with multiple leads 1pc x EEPROM converter 1pc x User Manual
1. All-in-One Key Programmer. Integrates Multiple Function Models 2. Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell 3. Compatible with Multiple X-431 Series Diagnostic Tablet: X-431 V, X-431 V+, X-431 PAD V, X-431 PAD VII, X431 PRO 5, X431 PROS V4.0, etc 4. Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key). 5. Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU). 6. Enables Reading/ Writing EEPROM, On-Board MCU and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.
Launch GIII X-Prog 3 Features:
1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/ writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code. 2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.
Read/write for BMW CAS4+ and FEM chips
Reading and writing car key chip
Read for BMW engine ISN code
Read/write EEPROM MCU....
3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Compatible with: X431 V, X431 V+, X431 ProS, X431 PRO GT, X431 PRO V4.0, X431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
5. Reads & writes most Engine/ Gearbox ECUs without disassembling the shell
Launch GIII X-Prog 3 Advantages:
1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key). 2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning. 3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox. 4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine. 5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty. 6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).
1) Added ECU reading and writing functions for 10 models of Siemens Engine including MSD80, MSD81, MSD85, MSD87, MSV90, SIM271DE, SIM271KE, SIMOS8.4, SIMOS8.5 and SIMOS8.6; 2) Added ECU reading and writing functions for 5 models of Transmission including 9G_Tronic, DQ380, AL551, AL450 and 8HPXX.
Supported Brands: VW, Audi, Skoda, SEAT, BMW, Mercedes-Benz, Toyota, updates to be continued
Supported Systems: Engine system, automatic transmission, instrument system, CAS, body system, lock system
Core Functions:
1. Integrated the functions of key matching/ copy, anti-theft IC reading & writing, and ECU reading & writing, etc. 2. Supports common ECU/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating. 3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through an independent harness without removing the IC). 4. Supports ECU replacement for the fourth-generation of VW/ AUDI engine; 5. Supports ECU replacement for the fifth generation of VW/ AUDI Bosch and Siemens engines. 6. Supports all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC. 7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty. 8. Supports the BMW CAS4/CAS4+ module replacement. 9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S. 11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute. 12. Supports VW/ AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key). 13. Supports ECU replacement for the fifth generation of Audi (0AW/0B5) gearbox. 14. Supports reading, writing & cloning the ECU for the fourth generation of VW UDS engine. 15. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty. 16. Works with reprogramming device to backup/ restore programming data (For Bosch/ Siemens engine ECU).
Supported ECU MCU List: (Support more than 1000 models, keep updating)
Atmel
NSC
Fujitsu
Philips
Infineon
Renesas M16
MC68HC05
Renesas M32
MC68HC08
Renesas M32R
MC68HC11
Renesas R32C
MC68HC12
Renesas R8C
MediaTek
Renesas V850 SPI
MicroChip
Renesas V850 UART
Nordic
Samsung
ST
SiLabs
How to Use X-PROG3 to Read and Write Data?
Method 1: Directly connect to OBD16 for key matching, data reading and writing, etc
Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
Method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host.
Launch X-Prog3
EEPROM Read and Write
Yes, Supported
MCU Read and Write
Yes, Supported
Mercedes Benz Key
Yes, Supported
Key Simulator
Yes, Supported
VW 4th instrument disassembly/reading/all lost
Yes, Supported
Read Engine via Bench Mode
Yes, Supported
Read Engine via Boot Mode
Yes, Supported
VW 4th All Key Lost without Account
Yes, Supported
Read Gearbox
Yes, Supported
Read and Write Key
Yes, Supported
Read BMW ISN
Yes, Supported
Read CAS4+/FEM Chip
Yes, Supported
Audi 5th generation steering column chip reading and writing
Yes, Supported
Replace OBD Reading Component
Yes, Supported
Package List:
1pc x Launch X-PROG 3 1pc x Power adapter 1pc x Main diagnostic cable 1pc x The fourth-generation data acquisition cable 1pc x The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard) 1pc x BENCH mode cable 1pc x MCU converter V1 1pc x MCU converter V2 1pc x MCU cable with multiple leads 1pc x EEPROM chip adapter 1pc x Benz infrared analog acquisition key 1pc x MCU cable with multiple leads 1pc x EEPROM converter 1pc x User Manual
Learn more about the Launch X431 GIII X-PROG 3
General
Brand
Launch X431
Model
GIII X-PROG 3
Size
Size/Dimensions
Inch: 16.61*13.94*4.84
Type
Type
Test Equipment
Features
Features
Launch X431 GIII X-PROG 3 Immobilizer and Key Programmer Tool is a chip reading device capable of EEPROM reading and writing as well as offers IMMO functionality, key programming, and other advanced features for North America, Asian, and European vehicle. Additionally, the X-PROG 3 is compatible to work with Launch scan tools to perform key and chip programming, such as the X-431 V, X-431 V+, X-431 Pad V, and more models.
This product does not include manufacturer warranty when purchased or used outside of its designated sales region. By purchasing internationally, you acknowledge that warranty support from the manufacturer will not be available.
Manufacturer Contact Info
For a directory of all our manufacturers, please click below.