DC-DC Buck Converter Module Adjustable Constant Current Driver 5V-30V To 3.3V 3A for Car Motorcycle Battery Charging

DC-DC Buck Converter Module Adjustable Outputs Buck Converter Board 5V-30V To 3.3V 5V 9V 12V for Car Motorcycle Battery Charging

Specification:

Origin: Mainland China

Type: Voltage Regulator

Condition: New

Model Number: Step Down Converter Board Module

Input Voltage: 5v~30v (Must Be Higher Than The Output Voltage) Preferably Below 28v.

Output Voltage: 3.3 v/5v, Other Voltage Values Can Be Customized.

Output Current: 3a (Max) Normal 1.61. 8a Over Plus Heat Sinking

Conversion Efficiency: 96% (Maximum)

Output Ripple: <30mv

Output Accuracy: 0.1 v

No-Load Current: <1ma

Operating Temperature: -40~+85

Operating Humidity: 20%~90

Size: 17*12*4mm (L*W*H)

Pcb Layers: 2 Layer Board

Shutdown Function: Not Supported

Heat Dissipation Mode: Natural Heat Dissipation

Installation: Wiring

Whether With Isolation: Without Isolation

Production Process: Machine Labeling, Reflow Soldering

Design Aging Standard: 720 Hours Without Failure

Factory Aging Standard: 72 Hours Without Failure

Service Life: 30, 000 Hours Without Failure (Output Current Does Not Exceed The Rated Value)

Inspection Standard: All Test (Factory Test + Storage Test)

Output Voltage: 3.3 v/5v/9v/12v

Product Size: 17.00 x 12.00 x 4.00 mm/ 0.67 x 0.47 x 0.16 inch

This power supply module is a power supply that can be directly mounted on a printed circuit board and features a power supply for application-specific integrated circuits (ASI

Cs), digital signal processors DSPs, microprocessors, memories, field-programmable gate arrays (FPG

As), and other digital or analog loads.

Note:

1. Input voltage preferably below 28V.

2. Normal current 1.6 - 1.8A over please add heat sink.

Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!

Please allow 1-2cm measuring deviation due to manual measurement.

1*Step-Down Power Module