SUNLU 3D Printer Filament PLA Plus 1.75mm, SUNLU Neatly Wound 1.75mm PRO, PLA+ Filament for Most FDM 3D Printer, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool(2.2lbs), Gray 10 KG
SUNLU 100% Wound Neatly Filament- SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound PLA+ Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency.
SUNLU PLA PLUS 3D Filament Advantages- PLA PLUS filament is 10 times stronger than PLA Filament, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion.
1.75mm Diameter- Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
Spool Diameter- Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers.
Recommend Settings- We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 55°C - 65°C (131°F - 149°F).
+
+
Overview
Specs
Reviews
SUNLU 100% Wound Neatly Filament- SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound PLA+ Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency. SUNLU PLA PLUS 3D Filament Advantages- PLA PLUS filament is 10 times stronger than PLA Filament, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion. 1.75 mm Diameter- Dimensional Accuracy +/- 0.02 mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75 mm FDM 3D printers. Spool Diameter- Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers. Recommend Settings- We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 55°C - 65°C (131°F - 149°F). Strong compatibility- SUNLU 3D Filament is not only applicable to all SUNLU 3D printing products: FDM 3D Printer, 3D Printer Accessories, Filament Dyer, but also applicable to almost all FDM 3D printers of other brands. For example: Ender 3/Ender 3V2, etc.
Notes
Please insert the filament into the side holes after use to avoid tangles.
Please stored the 3D printer filament in a sealed bag or box after using it.
Feel free to message us if you have any questions about the filament.
Q: Why can't the filaments stick to the build bed easily?
A: Please do 3 steps checking!
- Temperature
Please check the temperature(bed and nozzle) settings before printing and set it suitable.
- Building Bed
Please check if the bed is level, make sure the nozzle doesn't too far or too close to the bed.
- Speed
Please check if the printing speed of the first layer is too fast(Recommended: 20-40mm/s).
Recommended Settings:
- Nozzle 210°C - 235°C (410°F - 455°F)
- Bed 70°C - 80°C (158°F - 176°F)
- Printing Speed: 40-80(mm/s)
- These settings are for 0.4mm nozzle, it may be different with different diameters nozzle
