Professional Sensor Cleaning Solution for Full-Frame Cameras
Engineered for Streak-Free Clarity on Sony, Canon, Nikon & Fujifilm
The UES FFR24 kit is the trusted choice for photographers who demand perfection. Unlike generic cleaners, our Ultra-Pure Water formula (18MO) is safe for In-Body Image Stabilization (IBIS) systems and delicate sensor coatings. Whether you shoot in the studio or the field, achieve a pristine, dust-free sensor without the risk of residue or scratches.
100% Safe: Alcohol-Free & Ultra-Pure Formula
- Zero Streaks: Formulated with ultra-pure water (resistivity >18MO) to evaporate instantly without leaving residue.
- Sensor Safe: Completely alcohol-free and ammonia-free. Safe for sensitive coatings on all CMOS and CCD sensors.
- Certified Quality: Compliant with EU REACH standard. SGS tested for purity and safety.
Precision Engineering: The 24mm FFR24 Swab
- Perfect Fit: Exactly 24mm wide to cover full-frame sensors in a single pass, reducing the need for multiple swipes.
- Micro-Soft Fabric: The ultra-fine microfiber cloth lifts invisible dust and oils rather than pushing them around.
- Cleanroom Sealed: Each swab is vacuum-packaged in a Class 100 Cleanroom environment to ensure it is 100% dust-free when you open it.
Before Start Your Sensor Cleaning Process
- Make sure your camera’s battery is 100% fully charged.
- For the reflex camera, make sure to lock up the mirror before cleaning the sensor.
- Make sure to use an air blower to remove loose dust from the sensor first.
The Professional 3-Step Cleaning Protocol
Step 1: Remove Loose Dust First
Before touching the sensor, always use an air blower to remove abrasive particles. This is critical to prevent scratching the sensor coating during the wet clean phase. (Air blower sold separately).
Step 2: Apply 2 Drops MAX
Less is more. Apply only 1-2 drops of cleaner to the edge of the swab. Allow it to soak for 10 seconds. Warning: Over-saturating the swab is the #1 cause of streaks. Do not soak the swab.
Step 3: The Continuous Swipe
Hold the swab at a 60° angle. Swipe from one end of the sensor to the other. Without lifting the swab, immediately swipe back to the starting point in a single continuous motion. Discard the swab after one use.
 FFR-24 |  APSC-16 |  M43-12 |  APSC-30 |  FFR-30 |  AB09 | |
|---|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — | — |
| Price | — | — | — | — | — | — |
| Sensor Compatibility | Full-Frame | APS-C | M43 | APS-C | Full-Frame | Sensor Blower |
| Swab Width | 24mm | 16mm | 12mm | 16mm | 24mm | no data |
| Kit Capacity | 14 Swabs + 15ml Cleaner | 14 Swabs + 15ml Cleaner | 14 Swabs + 15ml Cleaner | 30 Swabs | 30 Swabs | no data |
| Best For | Cleaning Full Frame Sensor | Cleaning APS-C Sensor | Cleaning M43 Sensor | APS-C Swabs Refill | Full-Frame Swabs Refill | Dust Blower for Sensor and Lens |
Professional Sensor Cleaning Solution for Full-Frame Cameras
Engineered for Streak-Free Clarity on Sony, Canon, Nikon & Fujifilm
The UES FFR24 kit is the trusted choice for photographers who demand perfection. Unlike generic cleaners, our Ultra-Pure Water formula (18MO) is safe for In-Body Image Stabilization (IBIS) systems and delicate sensor coatings. Whether you shoot in the studio or the field, achieve a pristine, dust-free sensor without the risk of residue or scratches.
100% Safe: Alcohol-Free & Ultra-Pure Formula
- Zero Streaks: Formulated with ultra-pure water (resistivity >18MO) to evaporate instantly without leaving residue.
- Sensor Safe: Completely alcohol-free and ammonia-free. Safe for sensitive coatings on all CMOS and CCD sensors.
- Certified Quality: Compliant with EU REACH standard. SGS tested for purity and safety.
Precision Engineering: The 24mm FFR24 Swab
- Perfect Fit: Exactly 24mm wide to cover full-frame sensors in a single pass, reducing the need for multiple swipes.
- Micro-Soft Fabric: The ultra-fine microfiber cloth lifts invisible dust and oils rather than pushing them around.
- Cleanroom Sealed: Each swab is vacuum-packaged in a Class 100 Cleanroom environment to ensure it is 100% dust-free when you open it.
Before Start Your Sensor Cleaning Process
- Make sure your camera’s battery is 100% fully charged.
- For the reflex camera, make sure to lock up the mirror before cleaning the sensor.
- Make sure to use an air blower to remove loose dust from the sensor first.
The Professional 3-Step Cleaning Protocol
Step 1: Remove Loose Dust First
Before touching the sensor, always use an air blower to remove abrasive particles. This is critical to prevent scratching the sensor coating during the wet clean phase. (Air blower sold separately).
Step 2: Apply 2 Drops MAX
Less is more. Apply only 1-2 drops of cleaner to the edge of the swab. Allow it to soak for 10 seconds. Warning: Over-saturating the swab is the #1 cause of streaks. Do not soak the swab.
Step 3: The Continuous Swipe
Hold the swab at a 60° angle. Swipe from one end of the sensor to the other. Without lifting the swab, immediately swipe back to the starting point in a single continuous motion. Discard the swab after one use.
FFR-24 | APSC-16 | M43-12 | APSC-30 | FFR-30 | AB09 | |
|---|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — | — |
| Price | — | — | — | — | — | — |
| Sensor Compatibility | Full-Frame | APS-C | M43 | APS-C | Full-Frame | Sensor Blower |
| Swab Width | 24mm | 16mm | 12mm | 16mm | 24mm | no data |
| Kit Capacity | 14 Swabs + 15ml Cleaner | 14 Swabs + 15ml Cleaner | 14 Swabs + 15ml Cleaner | 30 Swabs | 30 Swabs | no data |
| Best For | Cleaning Full Frame Sensor | Cleaning APS-C Sensor | Cleaning M43 Sensor | APS-C Swabs Refill | Full-Frame Swabs Refill | Dust Blower for Sensor and Lens |