Question 1

I have a Gateway desktop computer that has two removable drive bays (sleds) that hold a standard SATA HDD.  I've tried mounting SSDs on the sleds before and they won't mesh up with the connections inside the desktop.   Will this enclosure hold a standard SSD and fit the sled so that the SSD can be used as a removable drive?

Accepted Answer

Hello Ron T,

As a desktop, it could be assumed that the SATA power and data connections are on cables... that aside...

The Dock opens, place SDD, slowly close Dock lid... it will slide the SDD into its interior SATA power and data connections and the lip will close and lock in to place automatically.

The Dock exterior SATA connections are exactly as if it were a 3.5 hard drive.

The Dock also mounts in any standard 3.5 slide/tray/mount that a conventional 3.5 HDD would go in to. Notice the three mounting holes on each side of the Dock.

I very much appreciate the manufacture quality and ease of use of these Docks, I ordered two more.

Good Fortunes

Question 2

Is this powered via SATA or a Molex connecter. Not the drives but for the device itself to receive power?

Accepted Answer

sata ssd goes into the box, and this box slides into the icy dock flex cage.  the back to the cage has all the power in the back of it to power the box and ssd.  basically the box is a adapter to a 3.5 inch bay . it makes everything line up for the ssd and the flex cage.

Question 3

will this bracket be compatible  with a pony 240 SSD in a 2008 Mac Pro HD bay?

Accepted Answer

The ICY DOCK EZconvert will work but you must use the APPLE hard drive tray that comes with the Apple computer. I have a 2008 Mac Pro and I just verified it will fit. The pony optima 240 gb ssd is a standard 2.5 inch SSD so it will fit into the ICY DOCK converter.  Once you have the converter mounted to the tray make sure all four screws are tight and that the top of the screws are level with the top of the tray .  Slide the tray into its slot straight and level, use a flash light to get a good look as you slid the tray in.  Use a #2 phillips screw driver for the tray .

Brand	ICY DOCK
Model	MB982SP-1S
Color	Silver

Conversion Tray	1 x 2.5" Drive to 3.5" Bay
Mobile Rack Drives Support	1 x 2.5" Drive to 3.5" Bay
Mobile Rack Interface	SATA I/II/III/SAS
Protection Case	Single Drive
Specifications	Color: Silver Compatible Drive Type: 2.5" SATA 1.5 / 3 / 6 Gb/s HDD / SSD (Up to 15mm) Device Interface: SATA Device Fit: 3.5" SATA Drive Bay Transfer Rate: Up to 6 Gb / sec. (depending on hard drive speed) Material: SECC Dimension (L x W x H): 5.77" x 4.0" x 1.0" Weight: 0.72 lb.

Best Sellers

Meet Your Seller

Icy Dock MB982SP-1S | Enterprise 2.5" to 3.5" SATA SSD & HDD Converter / Mounting Kit - EZConvert PRO

Learn more about the ICY DOCK MB982SP-1S

Customer Reviews of the ICY DOCK MB982SP-1S

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: 9SIB3EWKFB0982