EVGA DG-77 Matte Black Mid-Tower, 3 Sides of Tempered Glass, Vertical GPU Mount, RGB LED and Control Board, K-Boost, Gaming Case 170-B0-3540-KR

Pros: Overall, it is an acceptable design. Comes with most/all of the features you would expect from a modern case in this price bracket. The window is nice, airflow is good enough.

Cons: The biggest CON and the reason I even wrote this review is the PCI-E placeholder plate things that slot into the back have a flawed design. When I installed a PCI-E Wired NIC and tried to put the plate back on above it, it would not fit correctly. It is hard to describe in words, but basically things do not line up properly for you to be able to screw in the plate above your accessory. Another con is the fitment of the power supply in relation to the bottom of the motherboard and the holes on the plate above the PSU for routing case hardware/USB headers; there is not an appropriate amount of clearance to route cables through here, we're talking 2 or 3 more mm would have made it alright. EVGA should have done more physical testing of this design.

Overall Review: You get what you pay for, it's a good case.

Pros: Well built All glass sides and front

Cons: none

Overall Review: I would recommend this case

Pros: - The case is nice - DG-7 decal is removable

Cons: - Needs more fans, included is 1 intake, and 1 exhaust. - Too white, RGB lights hardly show through. - Front IO cables are a little too stiff, and will probably bend your USB 3.0 header.

Pros: -Got it on sale -Perfect amount of room for my build -Built outta tough strong material

Cons: -Just wished it was a little bit lighter, but thats it.

Overall Review: -I would recommend this to everyone

Pros: Looks great, all parts very high quality. Easy drive and MB mounting, plenty of extra hardware included.

Overall Review: You don't need to look any further for a great mid-tower ATX case.

Pros: I got this case for a great price. It ended up being the same overall cost to get this one free shipping than getting a less feature full case and paying shipping. All the cables were long enough to reach the leads on the motherboard. Everything tucks away nice, behind and underneath. Built in, removable 3.5" and 2.5" Caddies on back. Standoffs already in place to install motherboard, and it came with additional screws, multiple sizes. All the doors and panels are attached with thumb screws. Comes with 3 fans.

Cons: One of the USB 3.0 Ports on the top of the case was DOA. Reseated the cable a few times, no bent pins, just doesn't work. The port right next to it does. Both of the top audio ports do not work. They are closest to the dead USB port. It it were anything other than a heavy case I would RMA it. As it is, I feel trapped into keeping it because it would be extremely frustrating to break it all down and send it back.

Overall Review: I would have preferred a more simple case with less features. I can say that I do really like this case. I wish this case would have came with either 1) some extra washers and rubber grommets to extend the front case door distance about a 1/4" further than where it is to let just a smidge more air in. I'm fine with going to a hardware store and doing it myself, but I feel like it is bad design, and the fans have to work just a little harder than they would otherwise. I would prefer a case without RGB of any kind. When powered on, the "EVGA" badging can be seen shining through the glass side door and front. It does look classy. I don't have a vertical mount PCIe extension cable or I would have tried that out, although I do find it a little odd for EVGA to include something like vertical mount graphic card mounts but then have 80% opaque glass in front of it. Kinda defeats the purpose of showing the card off.

Pros: Comes with 2 case fans installed! Very clean and not to over the top!

Cons: I wish there was some chance to show off a little RGB if desired.

Overall Review: Overall using this case for our Ryzen 5 3600 build went very soothly. I really did enjoy the white aspect of the case. I would recommend to anyone who just wants a clean look.

Pros: Huge case and very spacious. Supports vertical mounting (need to buy an adapter though).

Cons: The front is a glass panel with small vents along the right edge of the front panel. I didn't find temps to be overwhelming since I had low-end hardware in it but I would say it would not let in adequate airflow.

Overall Review: Panels are tinted, so it helps hide cables that aren't managed properly or to soften lighting inside of the case. I would prefer it if the front panel was a mesh instead of a piece of glass, but it's a good case overall.